What's new
  • Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • Visit Resources
  • Visit Downloads
  • Visit Portal

[PAID] [Warlock] Demonic - An Advanced Honorbuddy Warlock Routine [PvE/PvP]

I get that, but I guess there is a setup working better than others?
Unless someone decides to share their own personal settings with you then you can always start with the default PvP.xml that Millz has provided. He's stated that that's a good starting point. Use that, then tweak it to your liking.

I hate to say it, but many, many people throughout this thread have asked for PvP settings, but I've never seen any posted, so I highly doubt that anyone will post any for anyone else to use anytime soon.
 
Unless someone decides to share their own personal settings with you then you can always start with the default PvP.xml that Millz has provided. He's stated that that's a good starting point. Use that, then tweak it to your liking.

I hate to say it, but many, many people throughout this thread have asked for PvP settings, but I've never seen any posted, so I highly doubt that anyone will post any for anyone else to use anytime soon.

Yeah, was worth a shot though. I have edited the PvP profile from Millz, but wouldl ike to get it improved. I don't have much experience with lock so some advise on what to do would be really helpful :)
 
Yeah, was worth a shot though. I have edited the PvP profile from Millz, but wouldl ike to get it improved. I don't have much experience with lock so some advise on what to do would be really helpful :)
I'm not a big fan of Noxxic for PvE, but I've "heard" that they're the best place to go for PvP. I tend to go to Icy Veins, but that's more for PvE that I've noticed. Try reading up at Noxxic on warlock PvP. I'm sure there are others here that can suggest some reading places for warlock PvP.

Personally, I'm not a fan of PvP at all, so I only do it when forced to (legendary cloak quest), or I'm just so absolutely bored with PvE that I can find nothing else to do, then I'll just go into a BG with Tyrael and try to kill as many Horde as possible until I relieve my boredom. But, back to the point I was trying to make, and that's if you're new to a class in PvP, you have to read up on it to get some "know how" on what to do, what to cast, when to cast it, how to gem and reforge, etc. The bot helps you, but having some inside knowledge also helps that last 30% or so.
 
I'm not a big fan of Noxxic for PvE, but I've "heard" that they're the best place to go for PvP. I tend to go to Icy Veins, but that's more for PvE that I've noticed. Try reading up at Noxxic on warlock PvP. I'm sure there are others here that can suggest some reading places for warlock PvP.

Personally, I'm not a fan of PvP at all, so I only do it when forced to (legendary cloak quest), or I'm just so absolutely bored with PvE that I can find nothing else to do, then I'll just go into a BG with Tyrael and try to kill as many Horde as possible until I relieve my boredom. But, back to the point I was trying to make, and that's if you're new to a class in PvP, you have to read up on it to get some "know how" on what to do, what to cast, when to cast it, how to gem and reforge, etc. The bot helps you, but having some inside knowledge also helps that last 30% or so.

Yeah, been reading on noxxic so I know the basics. Just gotta give it some time to practice it more. Anyway's, thank you for your help!
 
hey friends,

i have an issue that the routine seems to ignore my procs of the immerseus trinket and kardris toxic totem....

it just casts normaly further until it reaches 3.5 embers and then starts casting 1 chaos bolt :(

i also tried to edit the auralist by writing a 1 into the stacks field but nothing helped.... :(

is this a known bug?
 
hey friends,

i have an issue that the routine seems to ignore my procs of the immerseus trinket and kardris toxic totem....

it just casts normaly further until it reaches 3.5 embers and then starts casting 1 chaos bolt :(

i also tried to edit the auralist by writing a 1 into the stacks field but nothing helped.... :(

is this a known bug?
Please attach your unedited log so that Millz can debug the issue. If you're not sure how to attach your log, there's a link in my signature that will guide you on how to do this.
 
Millz--Sent you a PM.

Ill ask here too in the event it hasn't been answered previously and for future thread search hits.

I had Demonic Premium pre-buddy store, where I get it from the Assembla site.

It no longer works.

I added the free version to my buddy store and viola, the routine works again.

How do I get the paid version on my buddy store without re-purchasing it?

Thanks!
 
Millz--Sent you a PM.

Ill ask here too in the event it hasn't been answered previously and for future thread search hits.

I had Demonic Premium pre-buddy store, where I get it from the Assembla site.

It no longer works.

I added the free version to my buddy store and viola, the routine works again.

How do I get the paid version on my buddy store without re-purchasing it?

Thanks!
Please go to http://www.millz.biz/claim/ and enter your Assembla information. It will give you a key. Copy that key, then click on the word "here" on the same page as the key. That will display an empty box where you paste the key from the prior page. Voila, you now have a gifted version of Demonic Premium. It's been asked and answered numerous times, lol.
 
Please go to http://www.millz.biz/claim/ and enter your Assembla information. It will give you a key. Copy that key, then click on the word "here" on the same page as the key. That will display an empty box where you paste the key from the prior page. Voila, you now have a gifted version of Demonic Premium. It's been asked and answered numerous times, lol.

Sorry man, thought I was being smart and searching with the thread search tool, apparently I wasn't searching the right keywords.
 
hi, got an issue with the bot stopping after using enslave demon and being shot with chaos bolt from boss.

I do not know if this is Demonic failing causing this issue or HB or Lazyraider or Tyrael since I am running demonic I am starting there.
First I used Millz Demonic with Lazyraider as I normally use Lazyraider in dungeons and scenarios. I was trying to do the last part of a quest which is scenario Defeat Kanrethad. I find that after I use Enslave Demon on the Pit Load and the boss cast Chaos Bolt on me, from this point on, the bot does nothing at all. I have to do all casting of spells manually and of course I die. I see in the log it it showing Exception was thrown in BotBase.Root.Tick with System.NullReferenceException and other errors pointing to Lazyraider, however I changed to Tyrael BuddyStore version and still got the bot stopping after using enslave demon and the chaos bolt being fired on me. A log is attached. The log file was 14 /12 megs in sizer so i took out middle error section to shorten it down to upload.

View attachment 143235

I don't have it in this log as i have not done any bg's today but i also notice the bot stops from time to time for a few seconds like its taking a union break and then continue with its casting. Next time see it I will post that log.

Mo

Hey - Demonic doesn't support the Kanrethad fight. It's throwing loads of errors because it doesn't recognise the pet you've got enslaved. I'll fix the errors in the WoD build.

I have a request. I use a few different profiles (configs) and sometimes forget which one i have loaded. With this in mind, Millz, can you add the profile name (File name) that is loaded at the time to the left hand side box possibly under the ||Debug. If that suits you. This is because you do not know which one you are running even after you do a quick load of a profile especially if you clicked on the wrong profile in error.This way you can see which one is running.

gold: 10187.00
[GoldTracker]: Total Won: 0.00 - Gold/hour: 0.00
[GoldTracker]: -----------------------------------
[Demonic] Loaded Settings Using Quick Load.

The above is right after loading a profile (yadaya.xml) and using quick load, if you showed the file name being loaded, and you forgot, you cannot scroll back and check the hb log window most of the time to see which one due to it's limitation in size. Still no way to see which one is loaded at any time if ya forgot.

Thanks

Like so

View attachment 143355

Will add this into the WoD build too :)

I think Millz is done developing the routine for MoP usage. He's now going to concentrate on developing it for WoD, so that means possibly no more additions of features to the current routine. He's just fixing bugs now, and the SoC hotkey request is not a bug.

Also, if you ARE reporting a bug, attach a log.

^ This, pretty much. I'm still fixing bugs but trying to work on the WoD builds now.

Standing on road doing nothing, when I right clicked on mob to attack it, I have force attack checked which works good. The rotation did this the below.

I have disarm in the demonic config set in the pet section (disarm target their hp percent drops below 60) – this is the first command the bot did and the mob as in the log was (Ashleaf Sprite @ 100.0%). Then as shown it cast Shadowfury twice and then disarms again when the mob is still above 70% rather than <= 60%.


Honorbuddy v2.5.11489.748 started.
Logging in...
T: 5247155211538903493 H: 84519720
Attaching to D3D11
Attached to WoW with ID 3476
Honorbuddy v2.5.11489.748 started!
Character is a level 90 Goblin Warlock
Current zone is Timeless Isle
EnabledPlugins:
RecentProfiles:
Please wait a few seconds while Honorbuddy initializes.
New bot added!: ArchaeologyBuddy
New bot added!: BGBuddy
New bot added!: Dungeonbuddy
New bot added!: Gatherbuddy2
New bot added!: ProfessionBuddy
New bot added!: Grind Bot
New bot added!: Questing
New bot added!: Mixed Mode
New bot added!: Party Bot
New bot added!: [BETA] GrindBuddy
New bot added!: Combat Bot
New bot added!: LazyRaider
New bot added!: Raid Bot
New bot added!: Tyrael
New bot added!: Tyrael (Buddystore)
HBRelogHelper: Could not connect to HBRelog
ItemForAura - Questhelper - Version 2.0 Loaded.
Installed plugins
* Ultimate PVP Suite * - Disabled
* Ultimate PVP Suite * Version: 1.21 - Disabled
Anti Drown - Enabled
DrinkPotions - Disabled
EasyPockets - Disabled
GoldTracker - Disabled
HBRelogHelper - Disabled
Questhelper - ItemForAura - Disabled
Refreshment Detection - Enabled
RogueAssist - Disabled
[Demonic] Finding a suitable rotation...
[Demonic] Using the Destruction rotation.
[Demonic] Thanks for choosing Demonic Premium! [Update: 21/Sep/2014]
[Demonic] You are a level 90 Goblin (For the Horde!)
[Demonic]
[Demonic] If you've got low in game latency, enable both of the anti-lag settings under Advanced for better FPS.
[Demonic]
Honorbuddy Startup Complete
Starting the bot!
Currently Using BotBase : Tyrael
[GoldTracker]: -----------------------------------
[GoldTracker]: ----- Starting gold: 9805.00 -----
[GoldTracker]: -----------------------------------
[Tyrael]
------------------------------------------
[Tyrael] Checking if the used revision is the latest, updates if it is not.
[Tyrael] No updates found.
[Tyrael] ------------------------------------------
Changing current profile to Empty Profile
[Tyrael] ------------------------------------------
[Tyrael] Tyrael 5.6.4 has been started.
[Tyrael] Demonic Premium [Millz] is loaded.

[Tyrael] Special thanks to the following persons:
[Tyrael] PureRotation Team
[Tyrael] -------------------------------------------

[Demonic] Bot Started - Reloading Talents!
[Demonic] [HP: 100] [Mana: 100] [Embers: 1] [Casting: Disarm] [On: Ashleaf Sprite @ 100.0% - 407.5k] [Id: 72877]
[Demonic] [HP: 100] [Mana: 100] [Embers: 1] [Casting: Curse of the Elements] [On: Ashleaf Sprite @ 100.0% - 407.5k] [Id: 72877]
[Demonic] [HP: 100] [Mana: 96] [Embers: 1] [Casting: Shadowfury] [Loc: <-472.6717, -5703.689, 92.53896>]
[Demonic] [HP: 100] [Mana: 96] [Embers: 1] [Casting: Soulshatter] [On: Me @ 100.0% - 681.4k] [Id: 0]
[Demonic] [HP: 100] [Mana: 96] [Embers: 1] [Casting: Shadowfury] [Loc: <-472.6717, -5703.689, 92.53896>]
[Demonic] [HP: 100] [Mana: 100] [Embers: 1] [Casting: Rain of Fire] [Location: Ashleaf Sprite]
[Demonic] [HP: 96] [Mana: 100] [Embers: 1] [Casting: Rain of Fire] [Location: Ashleaf Sprite]
[Demonic] [HP: 96] [Mana: 75] [Embers: 1] [Casting: Rain of Fire] [Location: Ashleaf Sprite]
[Demonic] [HP: 96] [Mana: 80] [Embers: 1] [Casting: 111397] [On: Me @ 96.0%]
[Demonic] [HP: 96] [Mana: 80] [Embers: 1] [Casting: Disarm] [On: Ashleaf Sprite @ 75.4% - 307.4k] [Id: 72877]
[Demonic] [HP: 91] [Mana: 90] [Embers: 1.2] [Casting: Immolate] [On: Ashleaf Sprite @ 67.0% - 273.0k] [Id: 72877]
[Demonic] [DoTManager Added - Immolate] [Int:32165] [SP:38880] [Crit:26.72172] [Haste:0.8972304] [Mast:27.21167]
[Demonic] [HP: 91] [Mana: 96] [Embers: 1.2] [Casting: Conflagrate] [On: Ashleaf Sprite @ 59.2% - 241.1k] [Id: 72877]
[Demonic] [HP: 91] [Mana: 96] [Embers: 1.2] [Casting: Disarm] [On: Ashleaf Sprite @ 59.2% - 241.1k] [Id: 72877]
[Demonic] Automatically enabling burst mode!
[Demonic] Burst Enabled
[Demonic] [HP: 91] [Mana: 85] [Embers: 1.3] [Casting: Rain of Fire] [Location: Ashleaf Sprite]
[Demonic] Disabling Burst after 20.0237899 seconds!
[Demonic] Burst Disabled
Bot paused
Bot resumed
[Demonic] No combat for 15031ms. Clearing DoTManager...
[Demonic] DoTManager Cleared.

Log attached


View attachment 143479

The disarm has more conditions behind it than just HP %, they just aren't exposed - i.e. on cooldown for PvE units, on melee players if they've activated offensive CDs etc.

Hi anyone know if there is a setting for dismount? Everytime i mount up Demonic dismounts me

It'll dismount when the bot base tells it to engage in combat and movement is enabled.
 
hey friends,

i have an issue that the routine seems to ignore my procs of the immerseus trinket and kardris toxic totem....

it just casts normaly further until it reaches 3.5 embers and then starts casting 1 chaos bolt :(

i also tried to edit the auralist by writing a 1 into the stacks field but nothing helped.... :(

is this a known bug?

Post a log file please

Ref: How To Attach a Log
 
I agree with you Mattys, but you can't force Millz to stop his current development on the WoD things just to fix one third of his routine to play as well as destruction does. Affliction seems like the hardest spec to code for for a warlock, and he's worked a lot on getting it to where it is. If he kept trying to fix it until it was working perfectly, then when WoD launched we'd be so far behind that we'd have to wait quite a while before we got a working routine for WoD. I mean, I'd like to try out affliction because I'd like to see what it can do, but I know it's not working optimally right now. We can't force Millz to fix it completely because he's busy with advancing the routine for WoD so that it can be released on time. It sucks, I know, but there's not a lot you can do about it except ask for a refund (if your time hasn't expired in the store to do so). Even then if you ask for a refund you can never buy Demonic again, so there's always that downside.

Edit: Also, I'm sure that he'll have affliction working just as well as destruction, and maybe even demonology will be viable too, in WoD. With the changes being made in WoD, I think that coding for a warlock routine will be a lot easier than it is now. So, the affliction side may be gimped down a little in MoP, but in WoD I'm sure it will be rocking along.

Yeah.. I get all that.

The CR has it's problems, but I wont ask for a refund anyway. I like Millz and I know he's putting a lot of work into this CR - I'd like to support him, so no need for me to get a refund.. I'm very sad I can't get a refund from Mirabis though. I don't want to support him and I think he should just stop working on his CR ..
 
Any news on fixing the constant soulswap on 2+ targets? Looking forward to seeing DPS when using MG in aoe with 2 set
 
Hey - Demonic doesn't support the Kanrethad fight. It's throwing loads of errors because it doesn't recognize the pet you've got enslaved. I'll fix the errors in the WoD build.

---------------Cool, I got PureRotation off store last night and going to try this guy today, read your post and saw your vid on Kanrethad, great vid man, and yes i do know some things have changed since ya did it. It is a heck of a fight just to go green... thanks

Will add this into the WoD build too :)

--------------Right on man, thank you, it will help keep all and me knowing.

^ This, pretty much. I'm still fixing bugs but trying to work on the WoD builds now.

----------never ending bugs for sure, thanks for info.. have fun.


The disarm has more conditions behind it than just HP %, they just aren't exposed - i.e. on cooldown for PvE units, on melee players if they've activated offensive CDs etc.


It'll dismount when the bot base tells it to engage in combat and movement is enabled.

all with ----------- is my response.
Moboken
 
Oh, sorry! I need to look before typing :D

Edit: Still doesn't seem to be doing it.. Atleast, not against dummies with AOE on. It did it once of twice, then after that was just constant SS'ing

View attachment 143556

Try setting the SS minimum HP value to anything greater than 1 if you're trying against those dummies. It'll make it only cast against the raider ones (i.e. 2 targets at shrine) - you'll see it happening more. Against 4 targets it will spend nearly all of its time swapping.
 
hey millz

sorry forgot the log :( here it comes

seems it doesnt detect the expanded mind proc from immerseus trinket and only sometimes toxic might from the shamans trinket.

also it casts too many spells after it reaches the defined point for casting a chaosbolt :(
 

Attachments

Hey guys
I was wondering does anyone got a set up for pvp like dsl1's set up for pve?
would be awesome thanks in advance :)
 
ok i have a question . with this cc i set it to go into meta form at like 700 and to cancle it at like 2 . well my question is do u have it set to randomly go into meta between the cancel meta and the go into meta ? cause mine keeps going into it at like 200 - 300 and dosent give it much time to do any dmg
 
Back
Top