What's new
  • Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • Visit Resources
  • Visit Downloads
  • Visit Portal
RebornBuddy Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

[PAID] [Warlock] Demonic - An Advanced Honorbuddy Warlock Routine [PvE/PvP]

It should always go meta and refresh doom when trinket procs. Now it for some reason doesnt do that always.

Can you post a log please?

Could you also change, so it always waits till meta is off from cd before cancels it?

now it often switchs meta to cast just 1 soulfire and cancels it when there still 8sec cd, this leads to missed procs as well.

Overall routine acts very smooth now, dps went up by 12k from yesterday.

Waiting until it's off CD will mean it'll struggle to hit the max fury value - i.e. if it's set to cast meta at 900 fury, you'll never reach it. When it can't switch into meta, it refreshes Corruption (and multi-dots it), so it's not wasted.

CR doesnt use Haunt and Dark Regenaration in pvp...

It does, post a log please.

Yes , i did but doesnt work also and i want to cr auto use it... Maybe target under %30-40 or so...
Btw just noticed cr doesnt use soul burn soul swap also...

Disable AoE and it'll use it more on the current target. Enable Burst mode if you want to force haunt to cast, but most of the time it tries to pool the shards for buffs etc.

It definitely does use Soulburn + Soul Swap, post a log if you're having issues.

this has happened way to many times. he opens up gets some fury casts doom without perfect aim up leaves meta and perfect aim comes up right away... but cant cast doom because of cooldown. should have him stay in meta for 11 seconds at start of fight

As above, the proc isn't wasted, it's just used on other stuff instead. It's easier said than done trying to make it stay in meta form just for the start of the fight without breaking other conditions.
 
where can i get the elite version?

PM'd.

Best spec for leveling with this? As in most supported spec?

All are supported. Affliction is probably the best spec in my opinion though, as the DoTs are great for more than 1 target. Use the Siphon Life glyph too for extra healing.

@Millz

During "execution phase" I noticed that with plenty of demonic fury the cr is cycling out of demo form and casting soulfire. Is there a method to this? Shouldint it just refresh Corruption from demo form and sit there and dump Soulfires as meta?

It just continues to cycle the form. I can probably add in if target is boss and HP < 25% then don't cancel.. would need to change the conditions on Dark Soul too or it wouldn't build enough fury to cast.

Does honorbuddy still need to be called honorbuddy? I always change its name so it looks like something else is running.

Yeah must be called Honorbuddy.exe. No need renaming it, blizzard can't see the process anyway.
 
View attachment 100624

here is the log file , just ran 3 battleground...

It's using all of the abilities you've mentioned, i.e..

[06:37:09.029 N] [Demonic] [Casting: Soulburn] [On: Lvl 90 Alliance Warrior]
[06:37:09.547 N] [Demonic] [Casting: Haunt] [On: Lvl 90 Alliance Warrior]
[06:37:14.683 N] [Demonic] [Casting: Soul Swap] [On: Lvl 90 Alliance Warrior]

[06:50:45.423 N] [Demonic] [Casting: Dark Regeneration] [On: Lvl 90 Alliance Paladin]

I have however just found a new bug from looking at that log, so thanks :)

*Edit* I'm not sure how, but Singular is also interfering with the routine. It's installed treehooks when it's not the selected routine.
 
Haven't tested/released these changes yet, but this is what I've changed so far today.

- Removed some misleading logging
- Fixed exceptions when on loading screens
- Fixed exceptions with DoTManager
- Demonology: If target is boss or player, and HP below 25%, don't cancel meta form (unless Corruption has dropped).
- Demonology: Don't cancel Metamorphosis form if I have UVLS trinket, and current Doom on target is less than 100% crit.
 
Hey got the premium edition today and now when i want to open the class config in honorbuddy it says:

Value of '350' is not valid for 'Value'. 'Value' schould be between 'Minimum' and 'Maximum'.
Parameter name: Value

Deadyx
 
Here is a log http://textuploader.com/?p=6&id=pG9Yh
Everytime i reinstall my honorbuddy the Demonic Routine works untill i join a LFr / 5 man dung Scenario

anyone know what i can do to fix that ?

i would surely buy premium edition but i dont wanna risk it to have the same problems on my side :(
 
Millz,

Just a few quick thoughts:

1) PvE - Kills shit and gets great numbers. I don't PvE that often so I won't give much feed back besides the need to cast the first spell is a little bit annoying but, highly livable. I tip my hat to you!
2) PvP - I rolled as Affliction. AoE in PvP needs a completely different setup. Turning the AoE function off works fine but, the CR tends to lag for a second or two. Nothing detrimental just a bit annoying when you're trying to dot up and burn down an FC/OC and there heals while single targeting the weak healer and the CR wants to SoC/SS to infiniti, lol!

I know this isn't for PvP and I have a lot more information for ya. If a function for dotting healers and FC/OC could be created for PvP AoE, that would greatly benefit us who roll that front. I've also seen tendencies for the CR to freeze and "think" before casting it's dots. Not sure what is going on here but I will start to record my sessions for you with a audio overlay and explanation in real time to help you see what I see.

Great CR buddy! Keep it up!
 
Waiting until it's off CD will mean it'll struggle to hit the max fury value - i.e. if it's set to cast meta at 900 fury, you'll never reach it. When it can't switch into meta, it refreshes Corruption (and multi-dots it), so it's not wasted.

Corruption should never hard cast again after bursts rotation, to keep it up should be used with ToC.

prio #1 on UVLS procs is Doom, using it to something else but that makes proc wasted, whole point of that trinket is to keep 100% crit doom rolling, if it drops, demo dps is going down badly.

1 fel imp does around 400k-500k dmg and over the duration of crit doom there 13 imps spawned (if full pandemic effect) and thats shit load of dmg, as you can see, there's no point to waste that proc on other dps stuff but refresh doom as much as possible.

Quote Originally Posted by solohan View Post
this has happened way to many times. he opens up gets some fury casts doom without perfect aim up leaves meta and perfect aim comes up right away... but cant cast doom because of cooldown. should have him stay in meta for 11 seconds at start of fight

As above, the proc isn't wasted, it's just used on other stuff instead. It's easier said than done trying to make it stay in meta form just for the start of the fight without breaking other conditions.

This issue is easily fixed with bursts rotation which i posted earlier, with that crit doom will be rolling, as it is now, it just cast doom too early.
 
Everytime when i start HB it tells me that the config has rewritten and HB Needs a restart...the CR works tho but its kinda annoying does anyone else has that Problem? using Special Edition of the CR btw
 
Hey got the premium edition today and now when i want to open the class config in honorbuddy it says:

Value of '350' is not valid for 'Value'. 'Value' schould be between 'Minimum' and 'Maximum'.
Parameter name: Value

Deadyx

Hey, delete the files under <Honorbuddy>/Settings/Demonic/ - should work after that.

Here is a log TextUploader.com - Free text content hosting and text uploader
Everytime i reinstall my honorbuddy the Demonic Routine works untill i join a LFr / 5 man dung Scenario

anyone know what i can do to fix that ?

i would surely buy premium edition but i dont wanna risk it to have the same problems on my side :(

PM'd.

Millz,

Just a few quick thoughts:

1) PvE - Kills shit and gets great numbers. I don't PvE that often so I won't give much feed back besides the need to cast the first spell is a little bit annoying but, highly livable. I tip my hat to you!
2) PvP - I rolled as Affliction. AoE in PvP needs a completely different setup. Turning the AoE function off works fine but, the CR tends to lag for a second or two. Nothing detrimental just a bit annoying when you're trying to dot up and burn down an FC/OC and there heals while single targeting the weak healer and the CR wants to SoC/SS to infiniti, lol!

I know this isn't for PvP and I have a lot more information for ya. If a function for dotting healers and FC/OC could be created for PvP AoE, that would greatly benefit us who roll that front. I've also seen tendencies for the CR to freeze and "think" before casting it's dots. Not sure what is going on here but I will start to record my sessions for you with a audio overlay and explanation in real time to help you see what I see.

Great CR buddy! Keep it up!

Premium version lets you enable/disable AoE using hotkeys - makes it much easier to control. Get on Skype!

Corruption should never hard cast again after bursts rotation, to keep it up should be used with ToC.

prio #1 on UVLS procs is Doom, using it to something else but that makes proc wasted, whole point of that trinket is to keep 100% crit doom rolling, if it drops, demo dps is going down badly.

1 fel imp does around 400k-500k dmg and over the duration of crit doom there 13 imps spawned (if full pandemic effect) and thats shit load of dmg, as you can see, there's no point to waste that proc on other dps stuff but refresh doom as much as possible.

This issue is easily fixed with bursts rotation which i posted earlier, with that crit doom will be rolling, as it is now, it just cast doom too early.

It gave a DPS boost by allowing a hard cast of Corruption rather than switching form and incurring the 10s CD. When you use ToC it refreshes the DoT with your current stats. Doom should never be dropping off 100% crit. Post a log file and i'll be able to see if it's doing it. Turn AoE off while doing the test.

Everytime when i start HB it tells me that the config has rewritten and HB Needs a restart...the CR works tho but its kinda annoying does anyone else has that Problem? using Special Edition of the CR btw

Will do it every HB update, but shouldn't do it every load. Did you rename the Honorbuddy.exe? Stormchasing has gave me a solution to get around that issue. Will give it a go and try to fix soon.
 
Hey got the premium edition today and now when i want to open the class config in honorbuddy it says:

Value of '350' is not valid for 'Value'. 'Value' schould be between 'Minimum' and 'Maximum'.
Parameter name: Value

Deadyx

search for this line in the config file: <Destruction_ChaosBoltValue>3.5</Destruction_ChaosBoltValue>

and change it to this: <Destruction_ChaosBoltValue>3,5</Destruction_ChaosBoltValue>

it's a problem with the way floating point numbers are handled in different languages
 
Hi Millz,

no I didn't renamed the Honorbuddy.exe...like I said CR works but its still kinda annoying to get that message each time when i start HB
 
Hi Millz,

no I didn't renamed the Honorbuddy.exe...like I said CR works but its still kinda annoying to get that message each time when i start HB

That's really odd. It should only do the error the first time after an HB update, not every time you open the bot.
 
Hi Millz,

Here's the log about not switching to meta when UVLS procs (non crit doom was rolling and routine uses UVLS proc to refresh corruption, see the end part of logfile)
 

Attachments

question: is no movement etc the really ONLY thing thats missing in your "pro" version?

i have the feeling it is far more, but correct me if i'm wrong please.

I'm just asking because i like to donate some, but i don't need the "pro" version at all, cause ill always be playing with the cc by hand.
 
Hey this might be a noob question but every time i target an enemy it doesn't attack or anything, only until either the target gets really close to me or he attacks me. I'm kinda low level right now maybe its that or is there any setting i can change to fix this? or do we just always have to cast the first spell.
 
Back
Top