What's new
By:
  • Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • Visit Resources
  • Visit Downloads
  • Visit Portal

UPaCCBT: The BehaviourTree Ultimate Paladin Healer Custom Class

Status
Not open for further replies.
Just downloaded this for my HPal today and tried running it. I'm using it in PvP mode for random BG's. It seems the bot is pausing at each and every waypoint. I've looked around the forums and found that that seems to be a "precision" error, but have not been able to find where to change the value for that. Seems like it is only this custom class because i tried running fpsware ret and i did not have this problem and additionally tried running shamWOW on my resto sham and fpsware druid on my feral with none of this stuttering at waypoints problems. Was just wondering if anyone else had this problem?
 
Alright so storm, it is still having problems with dispelling.
I have enable logging enabled so my question is
Where are the logs stored? Or are they in the normal logs?
 
Anyone experiencing HB crashes while using this CC with Combat Bot , and know how to fix/avoid it. Other than that , the CC works fine.

FYI the crashes only happen if the raid wipes or if I stand in Orgrimmar and get called for my heroic and load up.
 
Could anyone tell me which Revision you're using because im scared to update now, the more it updates the more is seems bugged.
 
fukker said:
Could anyone tell me which Revision you're using because im scared to update now, the more it updates the more is seems bugged.
Click to expand...

UltimatePalaHealerBT v 1.4 revision 249

Grabbed whatever was on the SVN.
 
Hm, the CC barely uses Divine Favor...I think it should be used more often... because the 2pc T13 = If Divine Flavour is used, the cost of healing spells is reduced by 25%, which can save alot of mana. Last time I checked, when everybody is below 70% but above 40%, divine favor is never used. Divine favor should always be used when the CC decides to cast alot of spells, including HR.
 
@panyama you installed it in the wrong directory
e:\Main Center\Paladin Farm\CustomClasses\paldin2\
Click to expand...
should be
e:\Main Center\Paladin Farm\CustomClasses\UltimatePalaHealerBT\
Click to expand...

@question with holy radiance -> HR is almost implemented since the change from blizzard was public on live realms
@bambam92 logs are stored in the normal logs
@sevaa i know this crashing bug and i'm looking for the problem, to avoid it ... the only thing i can tell u -> stop before zonechange, start after zone change. i never get a crash while releasing ghost, only when entering / leaving raid / instance
@Jeff thanks for the suggestion I'll try to check this and maybe include this into a logic for 2pcT13
@whoever said there where errors with every update ... learn to read ;) the only issue, which is happening all the time, and i'm unable to fix atm, is the crashing thing ...

@all i'm in holidays ;) so ... no updates for a while, see my sig
 
When I go to LFR DS25 this does near to no healing and rarely even casts a spell yet alone instant casts. Works flawless in 5mans tho!
 
Pausing for 1 or 2 seconds after each waypoint in BGs

I've been using honorbuddy for about 2 weeks now (after migrating from Pirox) with really great results. The problem i am having "seems" to be associated with a new CC i am using as i have not had this problem using any other CC. The problem i am having as alluded to in the title is that my character will pause for a second to 2 seconds after each waypoint it reaches. This only occurs while on my holy paladin using one of the very scarce holy paladin CCs - UltimatePalaHealerBT. I tried using Fpsware Paladin's ret CC which worked like a charm, and also made sure it wasn't the bot by checking out other CC's on my other characters, all of which worked perfecty. So i've tried different CC's on my pala and different CC's with my different toons and it only happens on my paladin using this CC. I would normally just choose another CC but i need a holy paladin CC for Battlegrounds and as there are very few other alternatives (all of which do not even compare with this CC), i am not considering any others.

Doing some quick forum searching, it seems that the problem is the "PathPrecision" however i was told that i can not manually adjust this. Additionally, i was told that if the profile was made with a slower mount it could be problematic, but as this is a CC for HPals (which was made using crusader aura), i am assuming that this would not be the problem as well. My computer specs are fine as well as i was also told that a poor computer could be the culprit. I run in high settings getting around 50fps. I've also done a clean install of HB and the problem persists only with my HPal using this CC.

Any help would greatly be appreciated. Attached is my most current log.
 

Attachments

panyama said:
I'm not new nor a newbie to these things. I've read he told to download from SVN which I did and reinstalled 4x, no result. So again, how can the issue be solved?
Click to expand...

Rename the custom class folder to "UltimatePalaHealerBT" without the quotes. Should fix the problem. The CC expects it's folder to be named that. If your directory is off it will never find the files you need to open the config.
 
chad.olson said:
I've been using honorbuddy for about 2 weeks now (after migrating from Pirox) with really great results. The problem i am having "seems" to be associated with a new CC i am using as i have not had this problem using any other CC. The problem i am having as alluded to in the title is that my character will pause for a second to 2 seconds after each waypoint it reaches. This only occurs while on my holy paladin using one of the very scarce holy paladin CCs - UltimatePalaHealerBT. I tried using Fpsware Paladin's ret CC which worked like a charm, and also made sure it wasn't the bot by checking out other CC's on my other characters, all of which worked perfecty. So i've tried different CC's on my pala and different CC's with my different toons and it only happens on my paladin using this CC. I would normally just choose another CC but i need a holy paladin CC for Battlegrounds and as there are very few other alternatives (all of which do not even compare with this CC), i am not considering any others.

Doing some quick forum searching, it seems that the problem is the "PathPrecision" however i was told that i can not manually adjust this. Additionally, i was told that if the profile was made with a slower mount it could be problematic, but as this is a CC for HPals (which was made using crusader aura), i am assuming that this would not be the problem as well. My computer specs are fine as well as i was also told that a poor computer could be the culprit. I run in high settings getting around 50fps. I've also done a clean install of HB and the problem persists only with my HPal using this CC.

Any help would greatly be appreciated. Attached is my most current log.
Click to expand...

CC does no movement, but i'll try BGs when i'm back, never had these problems, but didn't bg since 4.3
 
I don't understand, It works fine when it is working, but when hitting the loading screen, HB just stops responding and crashes, and it's every time, so If im loading into BG or Raid, it'll just crash before I even get to it.

Also, when healing raids etc, I burns so much mana on nothing, just did two trash, and it burned about 80% of his mana
 
Last edited:
15outland said:
I don't understand, It works fine when it is working, but when hitting the loading screen, HB just stops responding and crashes, and it's every time, so If im loading into BG or Raid, it'll just crash before I even get to it.

Also, when healing raids etc, I burns so much mana on nothing, just did two trash, and it burned about 80% of his mana
Click to expand...

i can't reproduce this
healed 2 (3) raids yesterday - 2 LFRs 1 10m, no manaburning, heal no1-6 (no1 in 10m no4 and no6 in 25 lfr)
again ... (and this is very annoying) no crashes on loading-screens

for the mana burning -> check your settings, this is no issue with the CC, in over 30 testruns (raids,arena) no manaburning
the crashings .... i'm still working on this
 
Stormchasing said:
i can't reproduce this
healed 2 (3) raids yesterday - 2 LFRs 1 10m, no manaburning, heal no1-6 (no1 in 10m no4 and no6 in 25 lfr)
again ... (and this is very annoying) no crashes on loading-screens

for the mana burning -> check your settings, this is no issue with the CC, in over 30 testruns (raids,arena) no manaburning
the crashings .... i'm still working on this
Click to expand...
i always take the speed one in options :) (in lfr) then i am quite alot first , second or third
and just put setting higher in 25's
 
My healing build is Int > Mastery > Spirit > Haste - 6694 Int, 15.10 Mastery and 2695 Spirit. All unbuffed. My haste is pretty low (1281 or 10%). Glideroy said that this CC is designed for Spirit / Crit Holy Paladins, and said that Haste burns mana faster because the CC doesn't delay in healing - thus you keep casting and casting, losing mana faster. Also, don't get more than 15% crit. 15% (20%+ with raid buffs) crit is good enough for proccing Conviction almost all the time.

I've been topping healing charts ever since with my Mastery build. Slower casts but more effective heals. Since the CC reacts pretty quick, the slower casts (due to low haste) doesn't matter.

I barely OOM too. The settings I changed: Holy Light to 90%, Divine Light to 85%, Flash of Light to 40%, Infusion of Light (Divine Light) to 75%, and tank priority to 70% and 0% Multiplier. This is just the general stuff. Why higher %? Because Mastery works nicely and better with Divine Light, Flash of Light and Holy Radiance. So, use these spells more often than Holy Light - since Holy Light is an inexpensive/very little heal and the fact that you'll slow cast, it's better not to use Holy Light a lot.

Also, while you're slowly casting (again due to low haste), you're still regening mana and still giving the CC more time to decide what spell to use next. Understand what I mean?

tldr: Too much haste (1300+) you'll burn mana faster because the CC is designed for Spirit. Prioritise on Mastery and Spirit instead. Don't use more than 15% crit.
 
Last edited:
Yeah, makes alot of sense :D

what speed option do you use?
 
Last edited:
anyone know when this CC will be updated so it isn't always crashing, making it quite hard, especially with arena >.<
 
JeffKing1989 said:
My healing build is Int > Mastery > Spirit > Haste - 6694 Int, 15.10 Mastery and 2695 Spirit. All unbuffed. My haste is pretty low (1281 or 10%). Glideroy said that this CC is designed for Spirit / Crit Holy Paladins, and said that Haste burns mana faster because the CC doesn't delay in healing - thus you keep casting and casting, losing mana faster. Also, don't get more than 15% crit. 15% (20%+ with raid buffs) crit is good enough for proccing Conviction almost all the time.

I've been topping healing charts ever since with my Mastery build. Slower casts but more effective heals. Since the CC reacts pretty quick, the slower casts (due to low haste) doesn't matter.

I barely OOM too. The settings I changed: Holy Light to 90%, Divine Light to 85%, Flash of Light to 40%, Infusion of Light (Divine Light) to 75%, and tank priority to 70% and 0% Multiplier. This is just the general stuff. Why higher %? Because Mastery works nicely and better with Divine Light, Flash of Light and Holy Radiance. So, use these spells more often than Holy Light - since Holy Light is an inexpensive/very little heal and the fact that you'll slow cast, it's better not to use Holy Light a lot.

Also, while you're slowly casting (again due to low haste), you're still regening mana and still giving the CC more time to decide what spell to use next. Understand what I mean?

tldr: Too much haste (1300+) you'll burn mana faster because the CC is designed for Spirit. Prioritise on Mastery and Spirit instead. Don't use more than 15% crit.
Click to expand...


Ok, also, would I use the same for PVP? - focusing on the mastery?

And what do people use for the pvp settings?
 
Last edited:
Status
Not open for further replies.
Back
Top