[PAID] Ultimate Ashran - The Intelligent Ashran Helper!

[Phelon]

stil do nothing
and now it doesnt even move my chararcter to the raid

and anoter question, we cannot use it as a he&ler in ashran right?

Healer works fine. I use my resto druid.

It's working great now! Just watched it earn ~500 conquest over an hour and a half-ish. i joined an event group through the LFG thing and let it go. 11/10 would recommend

Fakin SWEET! /Hi5

^^loot off . . . better . . . . but still not right . . . . had to manually dismount toon, but it then engaged in combat.

View attachment 170938

loot . . . perhaps you are right, but I am there and have earned it. But If we can get it working correctly with loot off it will be ok.

I have assist set at 20. I could turn it off, but I doubt that is the problem with the dismounting?

Try dropping your assist % and upping you search range for combat. That might resolve your issue. I am guessing that combat is happening but not enough players are in range OR they are attacking mobs, but pull mobs isn't checked. Can you tell me in what situation it does nothing. Can you tell me what is going on around you when it does. I set my threshold high because I don't want it fighting unless it has to. I have set it low (10%) and it turns into a fighting machine. The default I put it at is a somewhat middle ground.

 

[CarlosDanger]

Some tricky problems

1) wont attack when group engages

2) when i set it to loot and pick up items, it often goes into this loop where it changes from engange items to engange group, ultimately doing nothing but running in circles.

3) When you rez in prison, toon just stands there.

I am on the trial not sure if that affects this.

Regards,

SmittyCoCo

View attachment 170962

 

[NuclearPanda]

Some tricky problems

1) wont attack when group engages

2) when i set it to loot and pick up items, it often goes into this loop where it changes from engange items to engange group, ultimately doing nothing but running in circles.

3) When you rez in prison, toon just stands there.

I am on the trial not sure if that affects this.

Regards,

SmittyCoCo

View attachment 170962

A. Have you watched the video tutorial on the 2nd post?

B. What CR are you using; and what do you have your Combat settings on?

C. Phelon is aware of the prison issue and should be coming out with a fix for that shortly.

Trial version does not matter.

 

[stefbo99]

Healer works fine. I use my resto druid.


hi, so how can u use druide resto in ashran?
i tried to use resto druid too, but it just targeted enemys and tried to attack.
my toon didnt heal anything, just targeted enemy and tried to cac them.
i use tunhua cr ( i checked the video yesterda before sleep so i didnt unchecked the tunhua cr movement yet)

 

[razldazl]

Hey i just purchased this, did the trial a while ago, however its not showing up in my hb, ive checked that it is streaming to it and it is, any help would be appreciated

 

[random hunter]

Healer works fine. I use my resto druid.



Fakin SWEET! /Hi5

Try dropping your assist % and upping you search range for combat. That might resolve your issue. I am guessing that combat is happening but not enough players are in range OR they are attacking mobs, but pull mobs isn't checked. Can you tell me in what situation it does nothing. Can you tell me what is going on around you when it does. I set my threshold high because I don't want it fighting unless it has to. I have set it low (10%) and it turns into a fighting machine. The default I put it at is a somewhat middle ground.

I tried turning off the assist and it did not help. I will try turning up the combat range.

I tried it with three different toons with three different CR's (all specialized class specific crs) - hunter, pally and druid; and got the same behavior on all three. I have been trying to get them to fight on the main road - lots of horde. And they follow, mounted, just fine. But when the leader (a hunter) dismounts and engages they just stay mounted. Perhaps the problem is the leader is engaging at range, but that should be ok for the other hunter and the druid.

I am in only a 4 man group . . . . but they are following and grouping ok.

It's obviously something to do with my set-up.

 

[NuclearPanda]

I tried turning off the assist and it did not help. I will try turning up the combat range.

I tried it with three different toons with three different CR's (all specialized class specific crs) - hunter, pally and druid; and got the same behavior on all three. I have been trying to get them to fight on the main road - lots of horde. And they follow, mounted, just fine. But when the leader (a hunter) dismounts and engages they just stay mounted. Perhaps the problem is the leader is engaging at range, but that should be ok for the other hunter and the druid.

I am in only a 4 man group . . . . but they are following and grouping ok.

It's obviously something to do with my set-up.

If you're only in a 4 man group then that's probably your issue. This plugin basically runs off of the percentage of your raid size. IE: it won't move to your location until a percentage of your raid is together, it won't assist unless X amount of friendly players are engaged in combat. Try joining a full group thru raid finder and run it and see what happens.

 

[random hunter]

^^ But it DOES move/follow just fine. And at least 25% (the leader) are certainly in combat. The toons do engage in combat if I manually dismount them - sometimes, but sometimes they just remount.

Edit: I just tried it running a second toon using the shadow bot set to leader assist, so that 50% of the raid was in combat; and same result . . . so I dont think it is the % in combat that is the problem.

Unfortunately big alliance raid groups are very very rare on my server. It is a horde dominated server.

On another topic . . . . there is no support thread for the guild plug-in. I tried a PM but got a message there was no support by PM . . . so I will ask here and hope . . . I just set up a new guild, had the 5 signatures lined up and that was easy, but I wold now like some of my toons to run around inviting people who don't have guilds - is there a way to get the plug in to do that (rather than create a new one)? Or if there is no way, does anyone know of something that will run around and make invites?

 

[stefbo99]

still doesnt work, i watched the video, unchecked tunhua as u said, the toon just go tot he raid and stay on the mount and follow player, nothing else. if i am attacked, it just try to run away on his mount. that is when i play a melee or a druid heal.
as a druid heal? lol just mount and watch people dying, then unmount and mount again and again, he try to go thrugh the fight with his mount

ps : oh i have to manually unmount the toon and he will start heal all the raid...
pps : but after sometimes healing, he just mount again and go check enemy and die

pps : also after around 2 hours running hb, my computer is overheating and hb doesnt do anything, so it sops

 

[Phelon]

Some tricky problems

1) wont attack when group engages

2) when i set it to loot and pick up items, it often goes into this loop where it changes from engange items to engange group, ultimately doing nothing but running in circles.

3) When you rez in prison, toon just stands there.

I am on the trial not sure if that affects this.

Regards,

SmittyCoCo

View attachment 170962

1) Set the group % Lower put it to say 5.

2) The Object Loot Issue I am working on. Hopefully a fix tomorrow.

3) Rezing in prision it should run out ( I am going to be adding hearthing) but atm, HB Can't path the prison for what ever reason.

Healer works fine. I use my resto druid.


hi, so how can u use druide resto in ashran?
i tried to use resto druid too, but it just targeted enemys and tried to attack.
my toon didnt heal anything, just targeted enemy and tried to cac them.
i use tunhua cr ( i checked the video yesterda before sleep so i didnt unchecked the tunhua cr movement yet)

So it didn't do anything with Singular?

Hey i just purchased this, did the trial a while ago, however its not showing up in my hb, ive checked that it is streaming to it and it is, any help would be appreciated

This is not something I Can help with unfortunately. That part is all 100% handled by HB Staff.

^^ But it DOES move/follow just fine. And at least 25% (the leader) are certainly in combat. The toons do engage in combat if I manually dismount them - sometimes, but sometimes they just remount.

Edit: I just tried it running a second toon using the shadow bot set to leader assist, so that 50% of the raid was in combat; and same result . . . so I dont think it is the % in combat that is the problem.

Unfortunately big alliance raid groups are very very rare on my server. It is a horde dominated server.

On another topic . . . . there is no support thread for the guild plug-in. I tried a PM but got a message there was no support by PM . . . so I will ask here and hope . . . I just set up a new guild, had the 5 signatures lined up and that was easy, but I wold now like some of my toons to run around inviting people who don't have guilds - is there a way to get the plug in to do that (rather than create a new one)? Or if there is no way, does anyone know of something that will run around and make invites?

I suggest using Raid Finder to join a winning Events group. This should solve alot of your issues. You have to do it manually for now. I am waiting before i dump a ton of time into automating that to see what they do. Since we know Ashran is going to get another patch sooner than later.

still doesnt work, i watched the video, unchecked tunhua as u said, the toon just go tot he raid and stay on the mount and follow player, nothing else. if i am attacked, it just try to run away on his mount. that is when i play a melee or a druid heal.
as a druid heal? lol just mount and watch people dying, then unmount and mount again and again, he try to go thrugh the fight with his mount

ps : oh i have to manually unmount the toon and he will start heal all the raid...
pps : but after sometimes healing, he just mount again and go check enemy and die

pps : also after around 2 hours running hb, my computer is overheating and hb doesnt do anything, so it sops

Try Singular and let me know.

 

[NuclearPanda]

Just letting everyone know you can now get Live Support by clicking the link in my signature, and you may also still contact me on Skype @ HBNuclearPanda.

Thanks.

 

[freak7]

The Plugin wasn't enabled ... kill me please >.<' Sorry to all of you! Its working! *ashamed*

 

[stefbo99]

Try Singular and let me know.[/QUOTE]

it s even worse with singular, so nothing to do with the cr

 

[Phelon]

Try Singular and let me know.

it s even worse with singular, so nothing to do with the cr[/QUOTE]

I Am going to include my config for my resto druid. Just put this in your Settings -> Server -> CharacterName -> UltimateAshran folder. Let me know how it goes.

 

[hostilis]

just stopping by to say THANK YOU again! i just hit cap on a fresh 100 toon. (nearly 16k conquest in ~3 days)
i love this botbase/plugin

 

[stefbo99]

if i dont unmount, then it just stays on his mount.
i tried ur xml u sent me with tunhua druid heal cr

ps : i really have to unmount my toon and then do one healing ( hot) and then it will start healing others

 

[Phelon]

if i dont unmount, then it just stays on his mount.
i tried ur xml u sent me with tunhua druid heal cr

ps : i really have to unmount my toon and then do one healing ( hot) and then it will start healing others

You know.. I dont think I uploaded all my new fixes. Let me upload my current version (I changed how it unmounts) and lets see if it fixes that. It should be available to use tomorrow.

 

[Phelon]

just stopping by to say THANK YOU again! i just hit cap on a fresh 100 toon. (nearly 16k conquest in ~3 days)
i love this botbase/plugin

Awesome man! I am glad to hear it! I am adding some new stuff hopefully tonight / Tomorrow for some more improved nav.

 

[thejaymanb]

Having trouble with the bot getting off it's mount, it really doesn't do anything unless I manually unmount, also at what point does it trade in the artifacts for rep?

 

[NuclearPanda]

Having trouble with the bot getting off it's mount, it really doesn't do anything unless I manually unmount, also at what point does it trade in the artifacts for rep?

Have you watched the tutorial video on the 2nd post? Also there's an option on the Loots tab to turn in Artifacts.