[PAID] Ultimate Ashran - The Intelligent Ashran Helper!

[craton]

finally got warlord of draenor today with almost all nemesis being done by this plugin just wanted to say thank you

 

[Phelon]

finally got warlord of draenor today with almost all nemesis being done by this plugin just wanted to say thank you

You beat me too it! Damn rofl. Considering I make this.. you would think I would have won that race rofl! Grats man!

 

[Phelon]

I have attached a log with no movement, my third time mentioning this. It is post #248, you keep replying to people without logs saying to post logs. If you are commenting on raid size, the raid was about 20 or so people. Please look into this, movement was working fine before your botbase update. I am using ultimate ashran botbase as well. Can you please look in my logfile. Thanks.

IM also not moving. ill post logs in a sec

i dont get it, if we have to use it as a bot now, instead of a plugin (where it was working fine), how can we choose combat bot when we re in ashran? coz now it is in bot base then it follow the ashran base, not the combat bot.
now it is in bot base so it just follow the raid ( sometimes) and dont attack, just mount, unmount...

It was working fine as a plugin with combat bot. Now with the *ultimate ashran* botbase there are a lot more problems and the bot behaviour is also more suspect (not attacking, mount unmount, etc.). How to switch back to combat bot?

A update went out tonight (and is currently live) that will resolve all of the moving issues. Please continue to use * Ultimate Ashran * if you want the plugin to control stuff inside Ashran.

Make an option not to use mounts plz

I can do this although Navigator forces it on you. Even though I set the Mount Distance to 200 when you start the bot, Navigator with in HB Force mounting after a certain distance. I take it you are trying to use Stealth or Shaman?

 

[stefbo99]

A update went out tonight (and is currently live) that will resolve all of the moving issues. Please continue to use * Ultimate Ashran * if you want the plugin to control stuff inside Ashran.



I can do this although Navigator forces it on you. Even though I set the Mount Distance to 200 when you start the bot, Navigator with in HB Force mounting after a certain distance. I take it you are trying to use Stealth or Shaman?

i tried it today.
it still doesnt work, it just follow the group, run around people, run around mobs, dont attack anything ; turning around mobs and enemys players.
still using it as a bot right? not as plugin?
so i select inside the "ultimate ashran" plugin, i select inside ashran --> ultimate ashran and outside ashran i select ultimate ashran too?

and also :
goal: movng to loot object : Ogres remains ---> my toon just stand there doing nothing

even if a mob unmount me, the toon dont attack, it just stands there and die.
i had to uncheck "loot objkect" because it keeps looting objects even tho the number restriction is on. ( like i looted 10 flowes in ashran that give buff); but it still keep looting) and ofcourse if a mob attack, the toon doesnt riposte, it just move a bit and die.

when there is a battle, with mobs or player, the toon just stay on his mount, nothing else or if the player or mobs unmount me, then the toon just follow the mob or player, it doesnt attack. feel weird

 

[Phelon]

i tried it today.
it still doesnt work, it just follow the group, run around people, run around mobs, dont attack anything ; turning around mobs and enemys players.
still using it as a bot right? not as plugin?
so i select inside the "ultimate ashran" plugin, i select inside ashran --> ultimate ashran and outside ashran i select ultimate ashran too?

and also :
goal: movng to loot object : Ogres remains ---> my toon just stand there doing nothing

even if a mob unmount me, the toon dont attack, it just stands there and die.
i had to uncheck "loot objkect" because it keeps looting objects even tho the number restriction is on. ( like i looted 10 flowes in ashran that give buff); but it still keep looting) and ofcourse if a mob attack, the toon doesnt riposte, it just move a bit and die.

when there is a battle, with mobs or player, the toon just stay on his mount, nothing else or if the player or mobs unmount me, then the toon just follow the mob or player, it doesnt attack. feel weird

Do you have "Preemptively attack players" checked in combat tab? You need this checked if you want to fight, unless you are not mounted and in combat. I am also going to be working on Object Loot today so you can select which objects you want to loot.

 

[stefbo99]

Do you have "Preemptively attack players" checked in combat tab? You need this checked if you want to fight, unless you are not mounted and in combat. I am also going to be working on Object Loot today so you can select which objects you want to loot.

yes Preemptively attack players is checked.

 

[Phelon]

yes Preemptively attack players is checked.

Do me a favor and tell me what happens when you use Singular? Can you also tell me your CR / Spec / Class?

 

[Inko]

I can do this although Navigator forces it on you. Even though I set the Mount Distance to 200 when you start the bot, Navigator with in HB Force mounting after a certain distance. I take it you are trying to use Stealth or Shaman?

Yep, I play rogue with Burst of Speed talent with stealth. I tried this plugin but it's not working.

 

[stefbo99]

Do me a favor and tell me what happens when you use Singular? Can you also tell me your CR / Spec / Class?

i use tunhua cr
monk brewmaster
when i decide to attack something ( when all the bot and ultimate ashran running, then it just attack ones, and just follow the mob without doing the cr stuffs

 

[Phelon]

Yep, I play rogue with Burst of Speed talent with stealth. I tried this plugin but it's not working.

Yea. It has to do with HB's Navigation wanting to force mounting. I would have to look into an over ride for it, although it isn't super high on my priority list to do so.

i use tunhua cr
monk brewmaster
when i decide to attack something ( when all the bot and ultimate ashran running, then it just attack ones, and just follow the mob without doing the cr stuffs

Try Singular and let me know if it works.

 

[hismadnezz]

you're advertising this plugin with 1000+ conquest points per hour. is that a promise?

 

[disguised]

you're advertising this plugin with 1000+ conquest points per hour. is that a promise?

Not really possible unless I'm missing something. It appears that the events were nerfed to 100 CP per one and they respawn every 30-40 minutes so at best you're looking at 800 CP per hour if you only get 30 minute spawns and meet no resistance at the events.

 

[cirrusjc]

Is there a step by step guide to setting up ultimate ashran ?

 

[NuclearPanda]

Is there a step by step guide to setting up ultimate ashran ?

I'll be making one, hopefully Wednesday. Been super busy but it's on my to do list.

 

[shane_young]

Prior to the patch I was running this. It was a little buggy at times but it got the job done. I was still a very satisfied customer. However, the past couple days I haven't been able to get it to run correctly. Just tried it about an hour ago and it was not moving. Just jumping in place at the start and then didn't move to my raid team. I know it will take some time to work it out and ill be patient. Thank you for working so hard on this. I'm sure it will be fine. My ONLY valid real complaint is there is not a step by step guide how to run the darn thing or what is the best method. You had mentioned that there will be an option to select what loot to roll on, etc. But i have never seen a settings box or field for this plugin. I only have the option to check mark the box "ultimate ashran" or uncheck the box. there is nothing else to select and no options menu for it (that I know of). Hence, the need for a guide. thank you

 

[Phelon]

you're advertising this plugin with 1000+ conquest points per hour. is that a promise?

Not really possible unless I'm missing something. It appears that the events were nerfed to 100 CP per one and they respawn every 30-40 minutes so at best you're looking at 800 CP per hour if you only get 30 minute spawns and meet no resistance at the events.

It used to be prior to the 6.1 nerf. Now if you are on the winning side it is more like 900+ an hour. 4x2x100 + Warlocks / Tree / Portals. It is still technically possible if everything aligns perfectly. Keep in mind you need to be on the dominant side for this to be true.

Is there a step by step guide to setting up ultimate ashran ?

I'll be making one, hopefully Wednesday. Been super busy but it's on my to do list.

You are awesome, I also added your request. It will now only set the distance if Ultimate Ashran botbase is selected =).

Prior to the patch I was running this. It was a little buggy at times but it got the job done. I was still a very satisfied customer. However, the past couple days I haven't been able to get it to run correctly. Just tried it about an hour ago and it was not moving. Just jumping in place at the start and then didn't move to my raid team. I know it will take some time to work it out and ill be patient. Thank you for working so hard on this. I'm sure it will be fine. My ONLY valid real complaint is there is not a step by step guide how to run the darn thing or what is the best method. You had mentioned that there will be an option to select what loot to roll on, etc. But i have never seen a settings box or field for this plugin. I only have the option to check mark the box "ultimate ashran" or uncheck the box. there is nothing else to select and no options menu for it (that I know of). Hence, the need for a guide. thank you

If you could post your settings and a log(set HB -> Settings-> Log Level = Diagnostic), I will take a look to find out why it is being bad. It has to be something I am not testing, because with the typical settings I use(which are the default) it is doing better than it ever has. So please post those things for me and I will find out why it isn't working and fix it. The In Ashran Botbase needs to be *Ultimate Ashran *. That could be why it isn't running? Do you have mix mode selected?

Need on loot is in the loot tab:

 

[dustinisgod]

Just standing at entrance doing nothing. Here are logs with TuanHA and with Singular.

View attachment 170209View attachment 170210

 

[Phelon]

Just standing at entrance doing nothing. Here are logs with TuanHA and with Singular.

View attachment 170209View attachment 170210

It doesn't appear you are in a group? I don't see it broadcasting for invites. Did you set it up to join groups? If you are going to roll solo you will have to wait for the timers to display in chat, once it has the timers on lock it will start moving freely to them.

 

[shane_young]

Not sure how to show you the log like he did below? however, i went step by step like you said. went with singular, went to settings and selected diagnostic level, went to mixed mode at the top right selection, put in ultimate ashran plugin, selected ashran settings and checked mixed mode for both in ashran and out, loot everything checked, hit start. and nothing happened. it would not start at all. honestly, i wish there was a youtube video on this.lol. im sure im making it harder than what it is, but im old school brother im trying to come up to speed !

 

[Phelon]

Not sure how to show you the log like he did below? however, i went step by step like you said. went with singular, went to settings and selected diagnostic level, went to mixed mode at the top right selection, put in ultimate ashran plugin, selected ashran settings and checked mixed mode for both in ashran and out, loot everything checked, hit start. and nothing happened. it would not start at all. honestly, i wish there was a youtube video on this.lol. im sure im making it harder than what it is, but im old school brother im trying to come up to speed !

I am working with Nuclear to get you all a video made. You also need to set up your chat to spam for a group. I think what you are missing is that you are not in a group. Get him in a group and then hit start if you want to do it the manual way!