What's new
By:
  • Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • Visit Resources
  • Visit Downloads
  • Visit Portal
RebornBuddy Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Ultima - The Ultimate Combat Routine

Ultima has been 90king me lately, I checked the logs and it doesn't give any errors or any mentions of why I'm DCing, I'm going to do more testing and see if it's a specific job or not (I've only been using it with Summoner since xpac hit), but it's totally the CR as it's 90kd me a couple times, and codex hasnt once

I tried using a stock RB with a freshly updated Ultima and nothing else and its still DCing me

It seems to be right when I initiate the pull, something related to the following, as this has been the point I DC a couple different times

[06:05:30.074 D] Requesting path on 146 from <-212.1349, 7.392967, 226.26> to <-241.31, 8.087832, 213.4675>
[06:05:30.107 D] Generated path to <-241.31, 8.087832, 213.4675> in 00:00:00.0331934 ms
[06:05:30.341 D] Targeting Dapper Zombie 0x4000B23F 0x1306CF40
[06:05:30.874 D] DoAction General 23 0xE0000000
[06:05:31.407 D] DoAction Spell 164 0x4000B23F
[06:05:31.408 N] [Ultima] Ability: Bio
[06:05:54.212 N] Stopping the bot. Reason:Closing down
[06:05:54.221 D] CurrentBot.Stop()
[06:05:54.224 N] Connection closed! 192.99.148.87:31214
[06:05:54.225 D] TreeHooks.Instance.ClearAll()
[06:05:54.225 N] Clearing all hooks.
Click to expand...
 
Last edited:
newb23 said:
\RB\Routines\UltimaCR\Settings\Forms\RotationOverlay.cs

private void RotationOverlay_Load(object sender, EventArgs e)
{
SetWindowPos(Handle, HWND_TOPMOST, 0, 0, 0, 0, TOPMOST_FLAGS);
}

Beyond that, you'll have to play. But, I'm pretty sure it's an x,y value which can be gotten with a simple tool like http://www.displaycalibration.com/resolution.html, or a similar desktop program. Good luck!
Click to expand...

Thanks for reply, however it does not change editing the numbers in RotationOverlay_Load.

Now I just manually adding
this.Location = new System.Drawing.Point(X,Y);

btw, you don't need another program to read x y, just bound a hotkey for RB console and run
Log(Cursor.Position);
 
hkme said:
Thanks for reply, however it does not change editing the numbers in RotationOverlay_Load.

Now I just manually adding
this.Location = new System.Drawing.Point(X,Y);

btw, you don't need another program to read x y, just bound a hotkey for RB console and run
Log(Cursor.Position);
Click to expand...

There you go! Glad I couldn't help you! :p
Also, thank you for letting me know about the cursor info, that might prove hand one day for me!
 
It be great if Ultima could have a enimity check so it would cast enimity spells on mobs around that are close to losing agro
 
Also are there any good summoners that know the best lvl 60 rotation? I've got the bot working with all of the new summoner abilities up to 58, but I haven't done much research for the lvl 60 rotation and still have a day or two before I hit 60.
 
heinzskies said:
Anyone thinks this is a good idea?'



So it will use Dark Arts at 90% mana with the next skill as Souleater.

Don't think I can find a good way to use the power slash combo without enmity value.
Click to expand...



That's a great idea, i was thinking of something the same along these lines! im guessing it wasnt a finished product. i tried to implement it but it didnt work. Gonna play around with it and see if i can get it working correctly as you suggested. Also possibly making it use Dark Arts with Carve and Spit also. what you think? It would optimize DPS for sure.
 
Last edited:
I seem to have some targeting "problems".
Example:

When i run dungeons and there are only 2-3 mobs, the routine is using single target rotation, which is fine because i have it on "Smart Target".
But my problem is, whenever i swap to the next mob via "Tab" the routine seems to stop and i have to manually cast a spell, before the routine acts normal again.
Sometimes it works, but most of the time it does these "stops" :/.
Already tried to switch the target before the old dies, but doesn't help.
 
chainapockets said:
I seem to have some targeting "problems".
Example:

When i run dungeons and there are only 2-3 mobs, the routine is using single target rotation, which is fine because i have it on "Smart Target".
But my problem is, whenever i swap to the next mob via "Tab" the routine seems to stop and i have to manually cast a spell, before the routine acts normal again.
Sometimes it works, but most of the time it does these "stops" :/.
Already tried to switch the target before the old dies, but doesn't help.
Click to expand...

The CR only attacks targets you have already aggro'd (and show up in the mini-health bars which by default are on the lower left of the screen). If only one mob is aggro'd to you in the pack, it will single-target that mob. If you switch to a new mob that isn't aggro'd, it will wait until you aggro it. Once aggro'd, it will use the AoE rotation based on the amount of mobs you have aggro'd (typically 3 or more for most AoE spells).

If you manually cast an AoE to aggro them all, it will engage AoE rotation right away and auto-attack when switching to the other aggro'd targets.
 
Cloud30000 said:
The CR only attacks targets you have already aggro'd (and show up in the mini-health bars which by default are on the lower left of the screen). If only one mob is aggro'd to you in the pack, it will single-target that mob. If you switch to a new mob that isn't aggro'd, it will wait until you aggro it. Once aggro'd, it will use the AoE rotation based on the amount of mobs you have aggro'd (typically 3 or more for most AoE spells).

If you manually cast an AoE to aggro them all, it will engage AoE rotation right away and auto-attack when switching to the other aggro'd targets.
Click to expand...

So simply starting off with an AoE should do the job?
Thanks! :)
 
Quick NIN fix, overwrite. I hope all the files are there. Cleared RAVEXx10 with this, no bunnies. You can still get bunnies if u lose/change your target though so be careful.

View attachment 182115

Edit: Just thought I should add that it will try to keep Huton up close to 70 seconds, so it will AC at 40 seconds or less, so get flanking at when below 40. It will Dream when B4B/Vuln is up and Duality when AE is going to be casted for sure.
 
Last edited:
have had no problems with any of the new classes/abilities in terms of getting my rotatiosn to load/work but I for the love of god can not get tri-disaster to work even in the simplest form, I'm assumign because of the namign logic with the - is the issue but someone better with C please advice

Main Spell . cs

private Spell _tridisaster;
public Spell Tri-disaster
{
get
{
return _tridisaster ??
(_tridisaster =
new Spell
{
Name = "Tri-disaster",
ID = 3580,
Level = 56,
GCDType = GCDType.On,
SpellType = SpellType.Cooldown,
CastType = CastType.Target
});
}
}

Summoner Methods Cs (very simpjle plan on doing a reverse bain logic with low timers on all 3)

private async Task<bool> Tri-disaster()
{
return await MySpells.Tri-disaster.Cast();
}

Combat CS

public override async Task<bool> Combat()
{
if (Ultima.UltSettings.SmartTarget)
{
if (await RagingStrikes()) return true;
if (await Tri-disaster()) return true;
if (await BioII()) return true;
if (await Miasma()) return true;
if (await Bio()) return true;
if (await MiasmaII()) return true;
if (await Aetherflow()) return true;
if (await EnergyDrain()) return true;
if (await Contagion()) return true;
if (await Bane()) return true;
if (await Fester()) return true;
if (await Painflare()) return true;
if (await ShadowFlare()) return true;
if (await Rouse()) return true;
if (await Spur()) return true;
if (await Enkindle()) return true;
if (await AerialSlash()) return true;
if (await RuinII()) return true;
if (await RuinIII()) return true;
return await Ruin();
}
 
Try without the "-" in the name... TriDisaster? Also make sure you remove/modify the old Tri-disaster.
 
khld said:
Quick NIN fix, overwrite. I hope all the files are there. Cleared RAVEXx10 with this, no bunnies. You can still get bunnies if u lose/change your target though so be careful.

View attachment 181964

Edit: Just thought I should add that it will try to keep Huton up close to 70 seconds, so it will AC at 40 seconds or less, so get flanking at when below 40. It will Dream when B4B/Vuln is up and Duality when AE is going to be casted for sure.
Click to expand...

im guessing this only works with level 60 NIN? tried it with my 52 NIN and it would do the opener until vulnerbility debuff wore off and then auto attack for a few and eventually getting back into rotation. just guessing thats where the new rotations come in.
 
Maybe related to me derping with the Huton code, try redownload again, I think I fixed it but can't test because I can't play at the moment.
 
This is going to sound insanely stupid, but what does this do exactly and what would you use it for?
 
You must log in or register to reply here.
Back
Top