TuanHA Monk - The Ultimate Experience

[fructiv]

I'm going to post my settings I used last night to get a spot in the world top 20 on the 2nd boss in 25man Heart of Fear last night.

The following settings are what I use for every encounter in 25 mans and they consistently put me at the top of the healing meters over the other mistweaver in my guild that manually heals.

These are the optimal settings for healing right now, raid healing of course, because monks are not and should not be tank healing.

Life Cocoon - 20%
Enveloping Mist - 0%
Soothing Mist - 0%
Surging Mist - 0%
Renewing Mist - 100%
Spinning Crane Kick - 90% @ 4 Targets
Uplift - 97% @ 1 Target (To Ensure the bot never sits at capped CHI and stops using Renewing Mist)
Chi Wave - 0%
Chi Burst - 0%
Zen Sphere - 0%
Jab to 3 CHI
Jade Serpent Statue DISABLED

I have tweaked the settings alot and tried different settings but the above are what you want to be using.

Like I said, the above settings put me in world top 20 for the 2nd boss in heart of fear 25 man last night.

I am currently at 484 iLVL with 10,200 Spirit unbuffed, and I normally end fights with 10-20% mana remaining, which is perfect and how you should be ending a fight.

Always, ALWAYS be in melee range, all of your chi for healing will come from either jabbing or using SCK on the melee around you when there is at least 4 of them below 90%

If you are having mana problems because you find the bot is using SCK to much and you don't have enough spirit to handle it, then just increase the targets and reduce the % on SCK.

Hope this helps.

why chi burst 0% ? the WoL top guys seem to use it, or am i wrong?

 

[txd]

why chi burst 0% ? the WoL top guys seem to use it, or am i wrong?

If you maintain 7+ Renewing Mist on your raid, Uplift > Chi Burst, This CC always maintains 7+ Renewing Mist on your raid.

Chi burst requires to much positioning and bot is not capable of knowing which target is the best target to fire it at so it hits the most targets in it's path.

the WoL top guys do not all use CHI burst, most #1 have Uplift as their main heal, and MIGHT have used chi burst a couple times during the encounter, when they have been careless with ReM and don't have it up on 7+ targets.

 

[CrazyJosh]

If you maintain 7+ Renewing Mist on your raid, Uplift > Chi Burst, This CC always maintains 7+ Renewing Mist on your raid.

Chi burst requires to much positioning and bot is not capable of knowing which target is the best target to fire it at so it hits the most targets in it's path.

the WoL top guys do not all use CHI burst, most #1 have Uplift as their main heal, and MIGHT have used chi burst a couple times during the encounter, when they have been careless with ReM and don't have it up on 7+ targets.

Since the Chi Wave fix - it is a comparable replacement for chi burst - but he is completely correct. Uplift is our major HPS.

 

[fructiv]

thanks!

 

[Cipro]

I tried your settings today in 25man LFR and they worked great till I went OOM

Any suggestions to tweak your settings forsomeone in 462 range..seems like Spinning Crane Kick killed my manna..

What talents and glyphs are u using?

Thanks so very much.
Cipro

 

[Surion79]

When is the Elegon bug being fixed? I am user of the Special Edition and I am still waiting on the fix.
Thank you

 

[Thang781]

When is the Elegon bug being fixed? I am user of the Special Edition and I am still waiting on the fix.
Thank you

yes, plz fix it. you said there is a code for it. and CLU are already using the code and everything is fine with it. plz fix it. it's so ayoning.

 

[eigoteacher]

He already said it would slow it down so he's waiting for an HB fix.

 

[CrazyJosh]

yes, plz fix it. you said there is a code for it. and CLU are already using the code and everything is fine with it. plz fix it. it's so ayoning.

It's not my area - it works fine for Mistweavers....but I'll try to look into it some..

 

[froggystyle]

I'm going to post my settings I used last night to get a spot in the world top 20 on the 2nd boss in 25man Heart of Fear last night.

The following settings are what I use for every encounter in 25 mans and they consistently put me at the top of the healing meters over the other mistweaver in my guild that manually heals.

These are the optimal settings for healing right now, raid healing of course, because monks are not and should not be tank healing.

Life Cocoon - 20%
Enveloping Mist - 0%
Soothing Mist - 0%
Surging Mist - 0%
Renewing Mist - 100%
Spinning Crane Kick - 90% @ 4 Targets
Uplift - 97% @ 1 Target (To Ensure the bot never sits at capped CHI and stops using Renewing Mist)
Chi Wave - 0%
Chi Burst - 0%
Zen Sphere - 0%
Jab to 3 CHI
Jade Serpent Statue DISABLED

I have tweaked the settings alot and tried different settings but the above are what you want to be using.

Like I said, the above settings put me in world top 20 for the 2nd boss in heart of fear 25 man last night.

I am currently at 484 iLVL with 10,200 Spirit unbuffed, and I normally end fights with 10-20% mana remaining, which is perfect and how you should be ending a fight.

Always, ALWAYS be in melee range, all of your chi for healing will come from either jabbing or using SCK on the melee around you when there is at least 4 of them below 90%

If you are having mana problems because you find the bot is using SCK to much and you don't have enough spirit to handle it, then just increase the targets and reduce the % on SCK.

Hope this helps.

Can you link your talent choices and glyphs ? i have multiple lfr top 30 heals but when it comes to 25mand im only around 98% of rank most of the time with a few ranks here an there.

 

[ebouster]

what ranks are you guys talking about? how do you know you are "ranked" ?

 

[nevigrofnu]

what ranks are you guys talking about? how do you know you are "ranked" ?

I'm assuming World of Logs.

 

[Meaniemoo]

Are there any plans for this working in BGs? Is there any other CC that is recommended for BGS?

 

[CrazyJosh]

Are there any plans for this working in BGs? Is there any other CC that is recommended for BGS?

As far as I know it does. I've only tried Mistweaver - but i've been told they all work.

 

[Meaniemoo]

When I load up on BGbot it stops and says bot type isn't supported... Also the first page says bgbot isn't supported either. How did you get yours to start?

 

[xsilverdicex]

When I load up on BGbot it stops and says bot type isn't supported... Also the first page says bgbot isn't supported either. How did you get yours to start?

BGbuddy is not supported in the Free public version.

 

[stefan2812]

HELP! Mistweaver not working anymore!

Somehow, Mistweaver isn`t working anymore for me (Using Revision 103 from SVN).

Following errors i can find in my logs:

Spoiler

[18:41:10.258 D] System.Threading.ThreadAbortException: Thread was being aborted.
at Styx.WoWInternals.World.GameWorld.
(WoWPoint , WoWPoint , Single , CGWorldFrameHitFlags , WoWPoint& )
at Styx.WoWInternals.World.GameWorld.TraceLine(WoWPoint from, WoWPoint to, CGWorldFrameHitFlags flags, WoWPoint& hitPoint)
at Styx.WoWInternals.World.GameWorld.TraceLine(WoWPoint from, WoWPoint to, CGWorldFrameHitFlags flags)
at Styx.WoWInternals.World.GameWorld.IsInLineOfSpellSight(WoWPoint from, WoWPoint to)
at Styx.WoWInternals.WoWObjects.WoWUnit.get_InLineOfSpellSight()
at TuanHA_Monk.Classname.AttackableValid(WoWUnit target) in c:\Users\Stefan\Downloads\Honorbuddy 2.5.6285.458\Routines\TuanHAMonkSpecialEdition\THHelpers.cs:line 39
at TuanHA_Monk.Classname.<GetUnitAttack>b__6c(WoWUnit unit) in c:\Users\Stefan\Downloads\Honorbuddy 2.5.6285.458\Routines\TuanHAMonkSpecialEdition\THCombat.cs:line 289
at System.Linq.Enumerable.<>c__DisplayClassf`1.<CombinePredicates>b__e(TSource x)
at System.Linq.Enumerable.WhereEnumerableIterator`1.MoveNext()
at System.Linq.Enumerable.FirstOrDefault[TSource](IEnumerable`1 source)
at TuanHA_Monk.Classname.GetUnitAttack() in c:\Users\Stefan\Downloads\Honorbuddy 2.5.6285.458\Routines\TuanHAMonkSpecialEdition\THCombat.cs:line 278
at TuanHA_Monk.Classname.Pulse() in c:\Users\Stefan\Downloads\Honorbuddy 2.5.6285.458\Routines\TuanHAMonkSpecialEdition\THCombat.cs:line 350
at Styx.Pulsator.Pulse(PulseFlags flags)
at Styx.CommonBot.TreeRoot.()
at Styx.CommonBot.TreeRoot.()
[18:41:10.259 D] System.Threading.ThreadAbortException: Thread was being aborted.
at Styx.CommonBot.TreeRoot.()
[18:41:10.251 D] Exception in TraceLine:Thread was being aborted. - at System.Threading.WaitHandle.WaitOneNative(SafeHandle waitableSafeHandle, UInt32 millisecondsTimeout, Boolean hasThreadAffinity, Boolean exitContext)
at System.Threading.WaitHandle.InternalWaitOne(SafeHandle waitableSafeHandle, Int64 millisecondsTimeout, Boolean hasThreadAffinity, Boolean exitContext)
at System.Threading.WaitHandle.WaitOne(Int32 millisecondsTimeout, Boolean exitContext)
at Styx.MemoryManagement.Executor.Execute(String debugMessage)
at Styx.WoWInternals.World.GameWorld.
(WoWPoint , WoWPoint , Single , CGWorldFrameHitFlags , WoWPoint& ) - mscorlib
[18:41:10.258 D] System.Threading.ThreadAbortException: Thread was being aborted.
at Styx.WoWInternals.World.GameWorld.
(WoWPoint , WoWPoint , Single , CGWorldFrameHitFlags , WoWPoint& )
at Styx.WoWInternals.World.GameWorld.TraceLine(WoWPoint from, WoWPoint to, CGWorldFrameHitFlags flags, WoWPoint& hitPoint)
at Styx.WoWInternals.World.GameWorld.TraceLine(WoWPoint from, WoWPoint to, CGWorldFrameHitFlags flags)
at Styx.WoWInternals.World.GameWorld.IsInLineOfSpellSight(WoWPoint from, WoWPoint to)
at Styx.WoWInternals.WoWObjects.WoWUnit.get_InLineOfSpellSight()
at TuanHA_Monk.Classname.AttackableValid(WoWUnit target) in c:\Users\Stefan\Downloads\Honorbuddy 2.5.6285.458\Routines\TuanHAMonkSpecialEdition\THHelpers.cs:line 39
at TuanHA_Monk.Classname.<GetUnitAttack>b__6c(WoWUnit unit) in c:\Users\Stefan\Downloads\Honorbuddy 2.5.6285.458\Routines\TuanHAMonkSpecialEdition\THCombat.cs:line 289
at System.Linq.Enumerable.<>c__DisplayClassf`1.<CombinePredicates>b__e(TSource x)
at System.Linq.Enumerable.WhereEnumerableIterator`1.MoveNext()
at System.Linq.Enumerable.FirstOrDefault[TSource](IEnumerable`1 source)
at TuanHA_Monk.Classname.GetUnitAttack() in c:\Users\Stefan\Downloads\Honorbuddy 2.5.6285.458\Routines\TuanHAMonkSpecialEdition\THCombat.cs:line 278
at TuanHA_Monk.Classname.Pulse() in c:\Users\Stefan\Downloads\Honorbuddy 2.5.6285.458\Routines\TuanHAMonkSpecialEdition\THCombat.cs:line 350
at Styx.Pulsator.Pulse(PulseFlags flags)
at Styx.CommonBot.TreeRoot.()
at Styx.CommonBot.TreeRoot.()
[18:41:10.259 D] System.Threading.ThreadAbortException: Thread was being aborted.
at Styx.CommonBot.TreeRoot.()

or this one:

Spoiler

[18:51:52.411 D] System.AccessViolationException: Could not read bytes from 0148BBDE [299]!
at Styx.MemoryManagement.ExternalProcessReader.ReadBytes(IntPtr address, Int32 count, Boolean isRelative)
at Styx.MemoryManagement.ExternalProcessReader.Read[T](IntPtr address, Boolean isRelative)
at Styx.StyxWoW.get_IsInGame()
at Styx.CommonBot.TreeRoot.()
at Styx.CommonBot.TreeRoot.()
[18:51:52.411 D] System.AccessViolationException: Could not read bytes from 0148BBDE [299]!
at Styx.MemoryManagement.ExternalProcessReader.ReadBytes(IntPtr address, Int32 count, Boolean isRelative)
at Styx.MemoryManagement.ExternalProcessReader.Read[T](IntPtr address, Boolean isRelative)
at Styx.StyxWoW.get_IsInGame()
at Styx.CommonBot.TreeRoot.()
at Styx.CommonBot.TreeRoot.()
[18:51:52.411 D] System.AccessViolationException: Could not read bytes from 0148BBDE [299]!
at Styx.MemoryManagement.ExternalProcessReader.ReadBytes(IntPtr address, Int32 count, Boolean isRelative)
at Styx.MemoryManagement.ExternalProcessReader.Read[T](IntPtr address, Boolean isRelative)
at Styx.StyxWoW.get_IsInGame()
at Styx.CommonBot.TreeRoot.()
at Styx.CommonBot.TreeRoot.()

Odd thing is, Windwalker works just fine.

I tried using diffrent HB builds as well (Beta and .507) Problrem remains. (Accros Lazyraider, Raidbot and Combat Bot) It doesnt even heal myself when i take dmg.

Any Suggestions?

 

[Chuck]

yes, plz fix it. you said there is a code for it. and CLU are already using the code and everything is fine with it. plz fix it. it's so ayoning.


Honorbuddy 2.5.6486.512

- Monk- WindWalker

* Added Pull support for aerial targets those flying or hanging above the ground.

But why not works on TuanHA Monk Special Edition ????

 

[sinner1337]

bump

 

[dwiz]

But why not works on TuanHA Monk Special Edition ????

I honestly don't know how the devs put up with all your bitching and moaning.. It impacts such a small part of the game but it's all that you people seem to care about. The fix implemented there was for most likely for singular, and as such hard coded.