What's new
By:
  • Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • Visit Resources
  • Visit Downloads
  • Visit Portal

[Test] Honorbuddy 2.0.0.3449

Status
Not open for further replies.
Minor Targetting Issue

Targetting issue:

The Zanzils in STV called Zanzil mindslave like to jump back to dead bodies and eat them to gain hp (like undead players who are low on hp).

When they jump back, the bot usually stops targetting them until they finish their "action / spell", then run back to the paladin (standing still, no target) until the mob attacks my toon, then it finally re-targets it. This is the only time i've seen it do this 1-30'ish

Log attached, pic attached of the pile of dead bodies (again, they jump to dead bodies, they were spread out when the bot pulled them).

I stopped the bot, did it manually, and I am not losing target when I manually play.

CC: Mordd's Convalesce Beta 2
profile: Kick's 1-60 Grinding (http://www.thebuddyforum.com/honorb...700-[]-grinding-1-60-[kick]-2.html#post173277)
HB .3499
Plugins: AutoEquip

Level 30'ish Paladin
 

Attachments

  • 12-6-2010_11_56 AM Log.txt
    12-6-2010_11_56 AM Log.txt
    13.6 KB · Views: 38
  • WoWScrnShot_120610_115906.webp
    WoWScrnShot_120610_115906.webp
    50.8 KB · Views: 57
  • WoWScrnShot_120610_120036.webp
    WoWScrnShot_120610_120036.webp
    63.3 KB · Views: 48
  • WoWScrnShot_120610_120438.webp
    WoWScrnShot_120610_120438.webp
    81.2 KB · Views: 44
Last edited:
Playing a Rogue with default Rogue CC.
Sometimes Rogue will just stand there when an enemy attacks it, and sometimes it will just stay still for periods of time.
 

Attachments

Nesox said:
HB has never used flightpaths to move around, it only picks them up.
eTrain used flightpaths tho
Click to expand...

is anyone going to update it?

I don't mind doing the "dirty duty" of getting the ones in /around my profile (as i've already gotten them! hehe). and just hotspotting them and adding some notes (or the correct code like eTrain has).

But of course someone will have to code it to actually work, as someone said that it wasn't working in the thread
 
Kickazz006 said:
Are you logging in with a capital N?

Try logging into:

http://hb.buddyauth.com <-- if it lets you in, then i'd say its a firewall issue
Click to expand...

not a firewall info for sure

Loading Honorbuddy 2.0.0.3449 settings.
Authenticating..
Gatherbuddy Sessions: 0/0
Honorbuddy Sessions: 0/0
Shared Sessions: 0/0
Invalid Account Details
Authentication failed!
 
Still not working well. Cant TurnIn compleated quest.
Quest Profile:
Code: 
        <PickUp QuestName="Дать отпор!" QuestId="28762" GiverName="" GiverId="197" X="-8913.069" Y="-137.4063" Z="80.81773" />
        <Objective QuestName="" QuestId="28762" Type="KillMob" MobId="49871" KillCount="6" />
        <TurnIn QuestName="Дать отпор!" QuestId="28762" TurnInName="" TurnInId="197" />
Error:
Code: 
[15:49:56:909] Cleared POI
[15:49:57:32] System.InvalidCastException: Заданное приведение является недопустимым.
   в System.Data.SQLite.SQLiteDataReader.VerifyType(Int32 i, DbType typ)
   в System.Data.SQLite.SQLiteDataReader.GetFloat(Int32 i)
   в Styx.Database.NpcResult..ctor(SQLiteDataReader A_0)
   в Styx.Database.NpcQueries.GetNpcById(UInt32 id)
   в QuestBot.Actions.PerformQuestObjectiveOrdered.a(TurnInNode A_0)
   в QuestBot.Actions.PerformQuestObjectiveOrdered.a(OrderNode A_0)
   в QuestBot.Actions.PerformQuestObjectiveOrdered.a.a()
   в TreeSharp.Composite.Tick(Object context)
   в TreeSharp.PrioritySelector.a.b()
   в TreeSharp.Composite.Tick(Object context)
   в TreeSharp.Decorator.a.a()
   в TreeSharp.Composite.Tick(Object context)
   в TreeSharp.PrioritySelector.a.b()
   в TreeSharp.Composite.Tick(Object context)
   в TreeSharp.PrioritySelector.a.b()
   в TreeSharp.Composite.Tick(Object context)
   в Styx.Logic.BehaviorTree.TreeRoot.b()

Seems it's problem with non EN locale.
 

Attachments

Last edited:
Always same problem:
[2:07:15 PM:662] Loading Honorbuddy 2.0.0.3449 settings.
[2:07:24 PM:238] Authenticating..
[2:07:25 PM:448] Gatherbuddy Sessions: 0/0
Honorbuddy Sessions: 0/0
Shared Sessions: 3/3
[2:07:30 PM:603] Attached to WoW with ID 2880
[2:07:30 PM:738] Authentication failed!
 
zeldrak said:
I don't know if I should put this here, or somewhere else, but it's happening with more than one CC (default CCs that were included with HB as well) so I'll put it here and see if I was right. Anyway, I've attached a log with the issues. It seems that it's not loading Amplify, Convalesce, Default Death Knight, Default Warlock, or ShamWoW. I know it's probably because the CCs haven't been updated for this particular release of HB, but the one before this they were all working fine.

Edit: Yeah, I just checked with a couple of other CCs. It looks like if the CC uses 'Sequence' or 'SequenceManager' then the CC doesn't load. I tried all three shaman CCs with the same result, I also tried a couple of others. I don't know if this is an HB issue or a CC issue.
Click to expand...
There was an unexpected change in the last HonorBuddy build removing the SequenceManager API. This was presumably done as part of the HB Team working through the build issues in the prior release (otherwise the change would have been communicated in advance.) Prior to release, someone else updated the Default Shaman CC to comment out the use of that API. This allows it to run, but also disables the behavior this area was providing. So for now you can use the Default Shaman, but with side effects (since the code dealing with them is what was commented out.) To see what the specific side effects are you can visit this post [CLICK HERE] in the ShamWOW thread.
 
Mesh / Path Issue

Seems to want to run up mountain but gets stuck
Right outside Lakeshire in Redridge
<Hotspot X="-9183.522" Y="-2279.134" Z="97.4414" />

Included Pictures:
 

Attachments

  • WoWScrnShot_120610_082225.webp
    WoWScrnShot_120610_082225.webp
    34 KB · Views: 38
  • WoWScrnShot_120610_082259.webp
    WoWScrnShot_120610_082259.webp
    109.5 KB · Views: 37
killakaz said:
Seems to want to run up mountain but gets stuck
Right outside Lakeshire in Redridge
<Hotspot X="-9183.522" Y="-2279.134" Z="97.4414" />

Included Pictures:
Click to expand...

temp solution:

Blackspot hills like that. Remember that blackspots can only be inside SubProfile and HBProfile. If you put them in GrindArea, it won't do anything
 
Restarted everything:
[2:36:43 PM:424] Loading Honorbuddy 2.0.0.3449 settings.
[2:36:45 PM:376] Authenticating..
[2:36:47 PM:367] Gatherbuddy Sessions: 0/0
Honorbuddy Sessions: 0/0
Shared Sessions: 1/3
[2:36:55 PM:79] Attached to WoW with ID 4560
[2:36:55 PM:223] Authentication failed!
 
3min3m said:
Restarted everything:
[2:36:43 PM:424] Loading Honorbuddy 2.0.0.3449 settings.
[2:36:45 PM:376] Authenticating..
[2:36:47 PM:367] Gatherbuddy Sessions: 0/0
Honorbuddy Sessions: 0/0
Shared Sessions: 1/3
[2:36:55 PM:79] Attached to WoW with ID 4560
[2:36:55 PM:223] Authentication failed!
Click to expand...

I got a workaround for this problem -> when i create a new folder, with a new copy of HB - it works for the first use. if i restart HB i have to make a new Copy of the HB folder again to get it work.
Somefiles are corrupt after the first use of HB - so it won't authenticate without a fresh install... weird. my logs are above
 
i dont get it why some people can use it and others cant, we are doing the same steps for getting this to work but for some its not working , like me for example...I followed this steps:

1. download [Test] Honorbuddy 2.0.0.3449

2. create a new folder on desktop

3. extract there honorbuddy

4. entering honorbuddy

5. logging Honorbuddy

6. getting that same thing like yday which i have been posted few replays earlyer.


Anyone know's what's going on? i'm using AVG 2011 and i even put exception for that whole folder but seems its not from antivirus...so anyone got a clue what should i do?
 
Using standard DK class in Northrend (scalding pools). My toon just don't rez (after beeing killed by a lvl 69 mob, what a pity for a lvl 72 DK)...

Have fun !
 
Nozzamporph said:
i dont get it why some people can use it and others cant, we are doing the same steps for getting this to work but for some its not working , like me for example...I followed this steps:

1. download [Test] Honorbuddy 2.0.0.3449

2. create a new folder on desktop

3. extract there honorbuddy

4. entering honorbuddy

5. logging Honorbuddy

6. getting that same thing like yday which i have been posted few replays earlyer.


Anyone know's what's going on? i'm using AVG 2011 and i even put exception for that whole folder but seems its not from antivirus...so anyone got a clue what should i do?
Click to expand...

I had problems with AVG at first, I restarted and everything was peachy
 
quick question :)

assuming blizz does what they say and catacylsm is literally just "switching" it on since we have everything patched and downloaded at this point. would that mean the bot would not need new offsets and could be ready to run at 3:01am est when the switch gets turned on? :D hope so!
 
Last edited:
medalofwhat said:
quick question :)

assuming blizz does what they say and catacylsm is literally just "switching" it on since we have everything patched and downloaded at this point. would that mean the bot would not need new offsets and could be ready to run at 3:01am est when the switch gets turned on? :D hope so!
Click to expand...

the new zones would still need to b meshed.. so i would think a couple days to do that
 
Status
Not open for further replies.
Back
Top