ShamWOW for HB - All Shaman Specs for Solo+Dungeons+Raids+PVP by Bobby53

[HB1560A71]

Shammy stopped heals

Hi Bobby,

Been using shamwow for a while now (Few years) Love it. Seen a few issues recently with not healing and having to intervene. Had one last night, Details below

HonorBuddy Mode: Lazyraider
Shamans Location: Shado-Pan Monastery

What should have happened (be specific): Pala Tank was taking damage from 3 mobs, Health dropped to ? health then ? then to 32%. Should have started healing at 3/4.

What did happen (be specific): Nothing, Shammy was facing player and didn?t heal. No other player taking any damage at all, All at full health so don?t think it was a command saying stop healing other units, Tank is at low health.

Computer time of problem or log mark (not realm time): [19:59:39.021 N]

 

[dubstep1337]

how to fix that the bot wont move directly next to the enemy even as heal.. :/

 

[TaeTae]

This isn't an error in Shamwow, per se. But it's an error caused by it in wow:

Message: [string "hax.lua"]:1: attempt to call global 'UnitID' (a nil value)
Time: 10/15/12 23:50:44
Count: 49
Stack: [string "hax.lua"]:1: in function `?'
[string "hax.lua"]:1: in function <[string "hax.lua"]:1>

Locals: args = <table> {
1 = 1350341451.353
2 = "SPELL_MISSED"
3 = false
4 = "0x0500000002EF7155"
5 = "Helyan-Wildhammer"
6 = 1298
7 = 0
8 = "0xF130DC800000F59A"
9 = "Wise Mari"
10 = 2632
11 = 0
12 = 20271
13 = "Judgment"
14 = 2
15 = "IMMUNE"
}
(*temporary) = "0x0500000002EF7155"
(*temporary) = nil
(*temporary) = "player"
(*temporary) = "attempt to call global 'UnitID' (a nil value)"

 

[TaeTae]

This isn't an error in Shamwow, per se. But it's an error caused by it in wow:

Message: [string "hax.lua"]:1: attempt to call global 'UnitID' (a nil value)
Time: 10/15/12 23:50:44
Count: 49
Stack: [string "hax.lua"]:1: in function `?'
[string "hax.lua"]:1: in function <[string "hax.lua"]:1>

Locals: args = <table> {
1 = 1350341451.353
2 = "SPELL_MISSED"
3 = false
4 = "0x0500000002EF7155"
5 = "Helyan-Wildhammer"
6 = 1298
7 = 0
8 = "0xF130DC800000F59A"
9 = "Wise Mari"
10 = 2632
11 = 0
12 = 20271
13 = "Judgment"
14 = 2
15 = "IMMUNE"
}
(*temporary) = "0x0500000002EF7155"
(*temporary) = nil
(*temporary) = "player"
(*temporary) = "attempt to call global 'UnitID' (a nil value)"

Getting this one too

Message: [string "hax.lua"]:1: attempt to call global 'UnitID' (a nil value)
Time: 10/15/12 23:50:14
Count: 1
Stack: [string "hax.lua"]:1: in function `?'
[string "hax.lua"]:1: in function <[string "hax.lua"]:1>
[C]: in function `UseAction'
Interface\FrameXML\SecureTemplates.lua:275: in function `handler'
Interface\FrameXML\SecureTemplates.lua:560: in function `SecureActionButton_OnClick'
Interface\FrameXML\ActionButton.lua:39: in function `ActionButtonDown'
[string "ACTIONBUTTON11"]:2: in function <[string "ACTIONBUTTON11"]:1>

Locals: args = <table> {
1 = 1350341420.961
2 = "SPELL_CAST_FAILED"
3 = false
4 = "0x05000000048081A3"
5 = "Taejang"
6 = 1297
7 = 0
8 = "0x0000000000000000"
10 = -2147483648
11 = -2147483648
12 = 2645
13 = "Ghost Wolf"
14 = 8
15 = "Not yet recovered"
}
(*temporary) = "0x05000000048081A3"
(*temporary) = nil
(*temporary) = "player"
(*temporary) = "attempt to call global 'UnitID' (a nil value)"

 

[darewood]

So I've used this CC before, and never had any issues. Lately though when trying to farm motes of harmony in the howling wind cavern using someone's profile. It will sometimes select dead sprites while one is attacking my shammy. If I use singular it works fine except it sometimes pulls too many mobs. I like this CC just because it doesn't try and pull too much, but it's been getting stuck on selecting a dead body. Anyway of fixing this?

 

[Pythnguy]

Getting this Error after doing fresh install. Any idea what is going on?

LOADED: ShamWOW v4.9.04 by Bobby53
Loaded character specific config
Config Change: Party Healing Surge % changed from 60% to 30%
HonorBuddy Spell Dictionary not fully initialized yet. Press Start again!
Bot Stopped! Reason: None Given

 

[Morten S]

You need to extract shamwow-global.config (comes inside the shamwow archive) to the settings folder in your honorbuddy directory, or you can follow the installation instructions from the very first page.

That file is already in the Settings folder after you've extracted the ZIP..
I've done a clean install 8 times and yes, I did it just like he described in the 1st post. (Pretty obvious)

 

[merv]

Sorry to bother you i'm having a problem extracting. ShamWOW-Global.config' IS MISSING!!!! I right click the file in the attempt to extract it to the right folder but I dont have the option to extract it what am i doing wrong?

Merv

 

[johol838]

Hey, I want my enhancement shaman to use healing surge on 5 maelstrom procs instead of lightning bolt. I've looked into the settings etc but nothing works. Even though the "prefer healing when maelstrom procs" is clicked. Some help here would be very appreciated, would give the bot more survivability.

Edit: I want it to ALWAYS use healing surge, can't be that hard to change right? It's just that I'm completely worthless when it comes to scripting etc.

 

[bfxr6]

As resto doesn't use unleash elements, and takes a long time to realise who needs healing, by that time theyre already full health.

 

[Tamahawk]

I am having the same problem as Darewood. Often, always, in combat, multi targets, it will kill one and stay locked on the dead target instead of moving to a new target that happens to be bashing its skull in.

So I've used this CC before, and never had any issues. Lately though when trying to farm motes of harmony in the howling wind cavern using someone's profile. It will sometimes select dead sprites while one is attacking my shammy. If I use singular it works fine except it sometimes pulls too many mobs. I like this CC just because it doesn't try and pull too much, but it's been getting stuck on selecting a dead body. Anyway of fixing this?

 

[Wolfman1190]

My resto shaman does not seem to keep my tidal wave buff up at all times i have riptide glyphed so it has no cooldown maybe the CC thinks its still on a cooldown? it should healing wave or greater healing wave twice as needed then riptide again but it does not.

 

[Gorthor]

For now it seems CLU is better for shamans since this hasn't been updated for mop spells, and bobby hasn't posted for more than a week though, hopefully this'll get updated at some point but for now CLU works really well for me

 

[bobby53]

Hi, sometimes the bot will /stopcasting (when I'm casting a damage spell and am on lowish health) and I assume it's to heal, but instead of healing it tries to cast another damage spell then /stopcasting that one too until the char dies.

View attachment 58135

cn, Thanks for the post. I reviewed the log file and the only occurrences of that were during an invalid setup. The log file section:

[10:32:49.948 N] Your Level 83 Troll Elemental Shaman Build is
[10:32:49.948 N] ... running the Questing bot in RAF 1m Party as Healer Only in Uldum

indicates you were running the Questing bot in a Party. That setup isn't supported as Questing Bot doesn't support group questing so that configuration hasn't been tested. Let me know if you encounter this issue during normal usage. Thanks for the post and good luck with your Shaman, Bobby53

 

[bobby53]

I have the same issue. Re-installed it ...

Thank you very much. The "extract shamwow-global.config" thingy, worked fine. (The wasn't in the installation guide on the first page btw...)

Pierla, Thanks for the post. The problem was due to extracting only part of the .ZIP file. Instructions for installing ShamWOW appear on both the Frequently Asked Questions (2nd post in this thread) and in the INSTALL.TXT provided in every version of the .ZIP you download. If you have additional questions on installation, take a look at those and then post again if there are any questions regarding those steps. Thanks for the post and good luck with your Shaman, Bobby53

 

[bobby53]

ShamWOW Users: My apologies. I've been away for a bit with some family commitments and other projects. I am catching up on forum posts and reviewing those in the thread now, so will be following up in the next day or so. Note that if your post is quoted below, you need to visit the ShamWOW Frequently Asked Questions [CLICK HERE] and follow the steps in FAQ #1 for me to assist you further. If your post is quoted below and you provided a log file in a separate post, no need to point that out... I will find it. The list below consists of recent posts that didn't attach a log file. I'll be following up individually on all the posts made the past couple weeks that did attach a log file. Thanks for your support and good luck with your Shaman, Bobby53

Bobby! Im using this on ... and mana stays the same.

I have the exact same issue.

1 more thing I just ... , or the shaman level + 3?

I never noticed it earlier but lately when ...

I have a little problem....

Not working anymore with the latest ...

:-\ Something wrong with latest version? Only ...

Cant get it to work either. It sais ...

Way better cc than singular, but ...

I keep getting this lua error ...

Does singular work with Lazyraider for healing?

Same problem with 1-5 Dranei Shaman, has ...

fix the lua errors please...

Bobby, you gotta fix your stuff or ...

is this supporting totems yet? ...

why does elemental use frost shock ...

Cant get this CC to show up in my class config..

I get the following error when pressing 'Start'...

Honorbuddy 2.5.6261.447\Settings\ShamWOW-...

Could you please make a default class ...

mine goes to cast chain lighting but it ...

How come when using Gatherbuddy2 my Shaman ...

I have the same issue. Re-installed it ...

When i'm in an instance in "Combat Bot" mode, ...

Having an issue when running GrindBot - my ...

how to fix that the bot wont move directly ... :/

So I've used this CC before, and never had any issues. Lately ...

Getting this Error after doing fresh install...

Sorry to bother you i'm having a problem extracting...

As resto doesn't use unleash elements, and takes a long ...

I am having the same problem as Darewood. Often, always, ..

My resto shaman does not seem to keep my tidal wave ...

For now it seems CLU is better for shamans since this ...

 

[ryan_laws]

Hey mate first time using the forums to contact someone for a profile sorry if im doing it wrong..

anyway the issue im having is i get spammed like crazy in wow while running shamwow ( get numerous hax.lua erros / and spell failed errors etc ) the bot doesnt stop working while these errors pop up but it is intensly annoying

any idea what would be causing this problem ?

 

[bobby53]

Hey mate first time using the forums to contact someone for a profile sorry if im doing it wrong..

anyway the issue im having is i get spammed like crazy in wow while running shamwow ( get numerous hax.lua erros / and spell failed errors etc ) the bot doesnt stop working while these errors pop up but it is intensly annoying

any idea what would be causing this problem ?

ryan_laws, Thanks for the post! I have not encountered that issue. A problem with LUA errors in WoW has been reported, but there is no way to know if your issue is the same based upon the description provided. There are a very large number of LUA calls in ShamWOW and code is written to make decisions specific to the spec, environment, group, and combat scenario you are botting in. The fact that your issue and the one already reported both reference LUA errors doesn't mean they are as similar as much as it may seem. Take a look at the ShamWOW Frequently Asked Questions [CLICK HERE] and follow the steps in FAQ #1 for me to assist you further on this issue. The other alternative is to wait it out and hope that as I resolve the issue reported it also solves yours. Thanks for the post and good luck with your Shaman, Bobby53

 

[bobby53]

*NEW* ShamWOW 4.9.07 available for download!

The most recent version of ShamWOW is available for download [CLICK HERE]. The change history is below, but this contains a fix for the LUA error that was reported by those providing Log files. Others may have encountered different LUA errors. If the LUA error you encountered is not fixed by this release then you'll need to follow the steps in the ShamWOW FAQ for providing the details needed.

- Is your Shaman behaving oddly with ShamWOW?

- Getting an error message?

- Have a question about a botting session you watched?
​

Read the ShamWOW Frequently Asked Questions [CLICK HERE]. FAQ #1 explains how to write a post in this thread that contains all the information I will need to research it for you. Please note that due to my other time commitments, I won't be able to respond to problems or questions that don't contain this info. I do this as a hobby and don't accept donations, so the way you can contribute to this project is by providing the information requested without my having to request it more than once. My apologies if it appears I am ignoring you, but I simply don't have the available time to repeat the request you just read time and time again for each poster.

Change History for ShamWOW 4.9.07

fixed - All Specs - LUA error referencing UnitID.  This was a bug in combat log management which has been corrected

fixed - All Specs - now correctly recognizes when channeled spell (from special ability in raid or quest item) is in use, so will no longer interrupt by starting new cast

*new* - All Specs - support for using Life Spirit like a Health Potion and Water Spirit like a Mana Potion

change- All Specs - trinket recognition has been improved to automatically detect Use: trinkets that buff stats or provide health/mana.  If you have a trinket that is not being recognized that you would like detected, please post with the exact name of the trinket (or the Item # would be even better.)

change- All Specs - additional workaround to prevent Bot movement interrupting a spell cast.

*new* - Elemental - support for Ascendance, Unleashed Fury, Elemental Blast

fixed - Elemental - issue with Fire Totems

*new* - Enhancement - support for Ascendance, Unleashed Fury, Elemental Blast, Storm Blast

change- Enhancement - revision to spell priority to match changes in Elitist Jerks spec since last check

*new* - Resto - support for using Ascendance when 3 or more group members within 40 yds are at 60% or less

change- Resto - removal of Health % settings for Riptide and Unleash Elements from the Group Healing configuration. These are not intended for use as direct heal spells, so providing a setup that leads people to think that they have to specify a Health % is wrong. Yes these will be cast as they were before, you just won't have to place a 0 in those fields to get the correct behavior like you did before.

 

[mocbar]

I will hug you for your continuing support

Ill test and report if i find anything