What's new
By:
  • Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • Visit Resources
  • Visit Downloads
  • Visit Portal

Rift Bot - Yet Another Rifting Profile!

Whats the best build and gear for an WD? I wanna run T4 or higher.

I wanna go an pet build with mask of jeram.

Is phsyical or poison best?

Just got this WD to 70 and need some assistance :)
 
snakkes said:
Whats the best build and gear for an WD? I wanna run T4 or higher.

I wanna go an pet build with mask of jeram.

Is phsyical or poison best?

Just got this WD to 70 and need some assistance :)
Click to expand...

I wish I could help. My wd, except the Starmetal, is BiS and manually I can easly do t6. With the bot, I can't go over t3.
Maybe to run t6 you have to configure Trinity but honestly I don't really know how.
 
I would really like some feedback on this profile.
How is your experience with it etc.

Is it backtracking? If so, which maps. Logs would also be helpful with this.

Note - Profile is at revision 356
 
Ayrel said:
I wish I could help. My wd, except the Starmetal, is BiS and manually I can easly do t6. With the bot, I can't go over t3.
Maybe to run t6 you have to configure Trinity but honestly I don't really know how.
Click to expand...

What is BIS for an pet doctor and what elemental is best?
 
Ayrel said:
I wish I could help. My wd, except the Starmetal, is BiS and manually I can easly do t6. With the bot, I can't go over t3.
Maybe to run t6 you have to configure Trinity but honestly I don't really know how.
Click to expand...

you must be doing something very wrong, i am far from BIS, i do not have a SMK, but my WD handles t4 rifts/bounties flawlessly. Under 1 death per hour.
I've accidentally left it at T6 doing bounties, quite a few deaths, but i got a cache or 2 out of it before i realized. No tweaking of any settings anywhere to achieve this.
Running TMF/Zunnies, specced fire, but have addler toads/Rhen'ho for CC.

not sure what fixed my rifting problem, but i did a fresh D3 Install, downloaded the latest compilation as of yesterday, Deleted my folder with d3prefs inside it.
Running again!

There is backtracking, but i'm half assed when i'm staring at the screen late at night sometimes

Very bad backtracking in quite a few maps, i'm going to get the tools installed to get worldids and maps etc soon.
 
Last edited:
This is what I'm running. And this is what I use for t6 when I want to play manually:

ud0VpBy.jp


1.3m paper dps
10m tough
4 immunity neck (arcane, fire, cold, lightning)
2xunity just in case
Running Gearswap.

I have SMK but without TallMan I prefer to run Ren'ho. 3xZuni is not really important right now, you can run t6 without it.
The only upgrade would be the ring (I'm paragon 549, never got one), but it's not game changing whatsoever...
I can run 3xAugh (shoulders/chest/bracers) and use Harrington instead of BT, it just depends.
The same bot runs my crus/barb @t6 without ANY problems so I don't know why WD act like that.
It just move differently, most of the times just stand there spamming random spells (without any criteria - e.g. Soul Harvest is used every gc despite the char position so many times the cd is wasted)

Fresh install DB 415
Latest Rift Bot Comp

Maybe gear/spec changes for optimal wd bot running? I really don't know.
 
Last edited:
rayofsi said:
you must be doing something very wrong, i am far from BIS, i do not have a SMK, but my WD handles t4 rifts/bounties flawlessly. Under 1 death per hour.
I've accidentally left it at T6 doing bounties, quite a few deaths, but i got a cache or 2 out of it before i realized. No tweaking of any settings anywhere to achieve this.
Running TMF/Zunnies, specced fire, but have addler toads/Rhen'ho for CC.

not sure what fixed my rifting problem, but i did a fresh D3 Install, downloaded the latest compilation as of yesterday, Deleted my folder with d3prefs inside it.
Running again!

There is backtracking, but i'm half assed when i'm staring at the screen late at night sometimes

Very bad backtracking in quite a few maps, i'm going to get the tools installed to get worldids and maps etc soon.
Click to expand...

Let me know what maps you have trouble with. I'm guessing It's mostly the cave maps?
 
Ayrel said:
This is what I'm running. And this is what I use for t6 when I want to play manually:

ud0VpBy.jpg


1.3m paper dps
10m tough
4 immunity neck (arcane, fire, cold, lightning)
2xunity just in case
Running Gearswap.

I have SMK but without TallMan I prefer to run Ren'ho. 3xZuni is not really important right now, you can run t6 without it.
The only upgrade would be the ring (I'm paragon 549, never got one), but it's not game changing whatsoever...
I can run 3xAugh (shoulders/chest/bracers) and use Harrington instead of BT, it just depends.
The same bot runs my crus/barb @t6 without ANY problems so I don't know why WD act like that.
It just move differently, most of the times just stand there spamming random spells (without any criteria - e.g. Soul Harvest is used every gc despite the char position so many times the cd is wasted)

Fresh install DB 415
Latest Rift Bot Comp

Maybe gear/spec changes for optimal wd bot running? I really don't know.
Click to expand...
have to figure out a crus build for my crusader hah, i only run that at t4 with no unity.

i run 3 piece zunnis, rhenho, witching hour, tmf. I think TMF makes a big difference, as well as the fetish army. My dog easily crits for 90 mil, face melt most mobs.
 
Oksehode said:
Let me know what maps you have trouble with. I'm guessing It's mostly the cave maps?
Click to expand...

i seem to have a ton of back tracking in the one that map where the entrance to lvl 2 is at the north most part of the map. wished i remember what it is called.
very large map in the south, then have a long thin passage up north, where theres another area with the entrancve to lvl 2. It would go up there, and run back down to the large area to clear. Takes a good minute or so with 55% run speed.
 
rayofsi said:
i seem to have a ton of back tracking in the one that map where the entrance to lvl 2 is at the north most part of the map. wished i remember what it is called.
very large map in the south, then have a long thin passage up north, where theres another area with the entrancve to lvl 2. It would go up there, and run back down to the large area to clear. Takes a good minute or so with 55% run speed.
Click to expand...

The name of the map is always displayed in the DB window when you enter. Like "Explore Bastion keep xx/xx/xx".

The issue of the bot turning around when getting close to the exit portal without it being in view yet is something I have to discuss with rrrix when he gets home from vacation on Monday.

It happens randomly and when it does, the bot will explore the remaining nodes before reporting the whole area explored and start again. The bot usually moves on to the exit on the second try. Don't know why it is happening. It was not a issue a few Quest Tools versions ago.
 
Last edited:
Oksehode said:
The name of the map is always displayed in the DB window when you enter. Like "Explore Bastion keep xx/xx/xx".

The issue of the bot turning around when getting close to the exit portal without it being in view yet is something I have to discuss with rrrix when he gets home from vacation on Monday.

It happens randomly and when it does, the bot will explore the remaining nodes before reporting the whole area explored and start again. The bot usually moves on to the exit on the second try. Don't know why it is happening. It was not a issue a few Quest Tools versions ago.
Click to expand...

i did notice that it worked decent a while ago. i think with package .99v281, i did not have the backtracking issue close to entrances, not sure really when the issue started, since most people just leave it running and forget it. I do sit down here and there to look at it.
 
rayofsi said:
i did notice that it worked decent a while ago. i think with package .99v281, i did not have the backtracking issue close to entrances, not sure really when the issue started, since most people just leave it running and forget it. I do sit down here and there to look at it.
Click to expand...

I used Quest Tools 2.0.70 or 2.0.74 with that pack. rrrix did some changes to the dungeon explorer after that. I will talk to him about it.
 
23:30:20.585 INFO LogMessageTag [Rift Bot] Explore Forgotten Battlefield @ 40/10/0.05
worldId="288454
sorry didnt get any pictures, hard to get things to work through teamviewer
Noticed it taking forever to find the exit on this, and running back and forth to explore this map
 
rayofsi said:
23:30:20.585 INFO LogMessageTag [Rift Bot] Explore Forgotten Battlefield @ 40/10/0.05
worldId="288454
sorry didnt get any pictures, hard to get things to work through teamviewer
Noticed it taking forever to find the exit on this, and running back and forth to explore this map
Click to expand...

Yeah I Screwed up that map by uploading the wrong version in the latest compilation. I had forgotten about that. I will correct it first thing tomorrow.

You can go into the RiftExplore.xml file and delete the entry with Forgotten Battlefields and let it use the random map parameters as a quickfix until I correct it. I've gone to bed for the night and not able to do it right now.
 
so all you need is that tag info i posted? No pictures needed? If so, i can definitely watch some more games and post the map info.
 
rayofsi said:
so all you need is that tag info i posted? No pictures needed? If so, i can definitely watch some more games and post the map info.
Click to expand...

A screenshot would be helpful, but not needed. Interesting to see where the bot starts to backtrack. Usually it is close to the exit without it being in view yet.
 
rayofsi said:
have to figure out a crus build for my crusader hah, i only run that at t4 with no unity.

i run 3 piece zunnis, rhenho, witching hour, tmf. I think TMF makes a big difference, as well as the fetish army. My dog easily crits for 90 mil, face melt most mobs.
Click to expand...

What build and other parts are you running?:)
 
You must log in or register to reply here.
Back
Top