What's new
By:
  • Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • Visit Resources
  • Visit Downloads
  • Visit Portal

R-YAR - rrrix's YAR fork

Any way this program could detect if error 42002 happens in diablo 3? If so could it exit diablo 3 and demonbuddy for X time and restart them?

In D3Debug.log this is what the error looks like. Thinking about doing a Powershell Script since i dont really know how to compile what ever this uses.
"ModalNotificationManager::SetOkNotification: You have logged in too soon after being disconnected. Please try again later. (Code 42002)"
 
Last edited:
Hmm, Since 403 it seems as though this will crash db/db causes it to crash... not sure
 
snakkes said:
How can I make it run 1 profile for 45 mins, then the next one for like 2 hours, then an other one for 30 mins?

Then loop them?

I have tried and experimented, but never gotten it to work :S

Anyone have an Guide for this?
Click to expand...

Anyone?
 
Anyone else getting an error when they going into the stats tab under R-YAR?

See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
System.OverflowException: Overflow error.
at System.Drawing.Graphics.CheckErrorStatus(Int32 status)
at System.Drawing.Graphics.DrawLine(Pen pen, Single x1, Single y1, Single x2, Single y2)
at System.Windows.Forms.DataVisualization.Charting.GdiGraphics.DrawLine(Pen pen, Single x1, Single y1, Single x2, Single y2)
at System.Windows.Forms.DataVisualization.Charting.ChartTypes.FastLineChart.DrawLine(Series series, DataPoint point, DataPoint pointMin, DataPoint pointMax, Int32 pointIndex, Pen pen, Single firstPointX, Single firstPointY, Single secondPointX, Single secondPointY)
at System.Windows.Forms.DataVisualization.Charting.ChartTypes.FastLineChart.Paint(ChartGraphics graph, CommonElements common, ChartArea area, Series seriesToDraw)
at System.Windows.Forms.DataVisualization.Charting.ChartArea.Paint(ChartGraphics graph)
at System.Windows.Forms.DataVisualization.Charting.ChartPicture.Paint(Graphics graph, Boolean paintTopLevelElementOnly)
at System.Windows.Forms.DataVisualization.Charting.Chart.OnPaint(PaintEventArgs e)
at System.Windows.Forms.Control.PaintWithErrorHandling(PaintEventArgs e, Int16 layer)
at System.Windows.Forms.Control.WmPaint(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


************** Loaded Assemblies **************
mscorlib
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.1 (RTMRel.030319-0100)
CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/mscorlib.dll
----------------------------------------
YetAnotherRelogger
Assembly Version: 1.1.5230.20265
Win32 Version:
CodeBase: file:///C:/Demonbuddy%201.1.1862.359/YetAnotherRelogger-master/LatestBuild/YetAnotherRelogger.exe
----------------------------------------
System.Windows.Forms
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.1 built by: RTMRel
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System.Drawing
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.1 built by: RTMRel
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
System
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.1 built by: RTMRel
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Core
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.1 built by: RTMRel
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll
----------------------------------------
System.Xml
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.1 built by: RTMRel
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
System.Configuration
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.1 (RTMRel.030319-0100)
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------
wreyoscm
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.1 built by: RTMRel
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Windows.Forms.DataVisualization
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.1
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms.DataVisualization/v4.0_4.0.0.0__31bf3856ad364e35/System.Windows.Forms.DataVisualization.dll
----------------------------------------
Accessibility
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.1 built by: RTMRel
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/Accessibility/v4.0_4.0.0.0__b03f5f7f11d50a3a/Accessibility.dll
----------------------------------------
System.Data
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.1 (RTMRel.030319-0100)
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_32/System.Data/v4.0_4.0.0.0__b77a5c561934e089/System.Data.dll
----------------------------------------

************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.

For example:

<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>

When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
 
Last edited:
Hi,

I'm using an isboxer and I'm planning to run 2 or 3 bots on the same pc. Do i need to fill up the last part of the setup which requires to clone a diablo3 and create a windows user for a unique ID?
 
Last edited:
so i guess no one is supporting this anymore since no one has answered my 3 posts about the memory error.

i have another question that maybe some one besides the developer can answer.
under the set up for the relogger it asks Processor priority on both the demon buddy and diablo tab can any one tell me what thats for and how it should be set im running a quad core processor and 8 gb of ram with a 2gb video card
thanks in advance for any help
 
Latest version posted. I have NOT TESTED THESE. (That's your job :D)

Added Authenticator Support (thanks Hokori)
Added Difficulty support and profile cycle fixes by jnnpsubm
 
pac213 said:
Hi,

I'm using an isboxer and I'm planning to run 2 or 3 bots on the same pc. Do i need to fill up the last part of the setup which requires to clone a diablo3 and create a windows user for a unique ID?
Click to expand...

No one?
 
pac213 said:
Hi,

I'm using an isboxer and I'm planning to run 2 or 3 bots on the same pc. Do i need to fill up the last part of the setup which requires to clone a diablo3 and create a windows user for a unique ID?
Click to expand...

No, leave that stuff unchecked. The ISBoxer settings are exclusive of game cloning. You don't need to clone your game if you use ISBoxer (that's the half the reason of using ISBoxer... )
 
rrrix said:
No, leave that stuff unchecked. The ISBoxer settings are exclusive of game cloning. You don't need to clone your game if you use ISBoxer (that's the half the reason of using ISBoxer... )
Click to expand...

Great! Thanks!
 
finalization said:
Hello Rrrix. I haven't been able to keep your version or YAR open for that long at all, ever since RoS launch. It crashes constantly. No matter how many fresh installs, using BETA/Release versions. Nothing.

This is what is in my log right as my R-Yar crashed. It repeats that message for about 4 more minutes, which is like 40 more times in my log

N [4/29/2014 6:12:20 AM] Relogger Crashed! with message Exception of type 'System.OutOfMemoryException' was thrown.
D [4/29/2014 6:12:20 AM] Exception: [Exception of type 'System.OutOfMemoryException' was thrown.]
System.OutOfMemoryException: Exception of type 'System.OutOfMemoryException' was thrown.
at System.Threading.Thread.StartInternal(IPrincipal principal, StackCrawlMark& stackMark)
at System.Threading.Thread.Start(StackCrawlMark& stackMark)
at System.Threading.Thread.Start()
at YetAnotherRelogger.Relogger.ReloggerWorker()
N [4/29/2014 6:12:20 AM] Waiting 10 seconds and try again!

Edit: I am running Windows 8.1 by the way. I don't know if that version has anything to do with how R-YAR interacts with the game.
Click to expand...

Just wanted to bump this again for you Rrix. Have issues like this been looked into at all?
 
rrrix said:
Latest version posted. I have NOT TESTED THESE. (That's your job :D)

Added Authenticator Support (thanks Hokori)
Added Difficulty support and profile cycle fixes by jnnpsubm
Click to expand...

Code: 
N [5/6/2014 1:01:04 PM] Relogger Crashed! with message Could not load file or assembly 'Authenticator, Version=2.0.10.190, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified.
D [5/6/2014 1:01:04 PM] Exception: [Could not load file or assembly 'Authenticator, Version=2.0.10.190, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified.]
System.IO.FileNotFoundException: Could not load file or assembly 'Authenticator, Version=2.0.10.190, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified.
File name: 'Authenticator, Version=2.0.10.190, Culture=neutral, PublicKeyToken=null'
   at YetAnotherRelogger.Helpers.Bot.DiabloClass.Start()
   at YetAnotherRelogger.Relogger.StartBoth(BotClass bot)
   at YetAnotherRelogger.Relogger.ReloggerWorker()

WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].

N [5/6/2014 1:01:04 PM] Waiting 10 seconds and try again!
 
Getting this error with the latest version

Code: 
N [5/6/2014 10:05:03 AM] <Hunter 2> We are scheduled to start
N [5/6/2014 10:05:03 AM] Relogger Crashed! with message Could not load file or assembly 'Authenticator, Version=2.0.10.190, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified.
D [5/6/2014 10:05:03 AM] Exception: [Could not load file or assembly 'Authenticator, Version=2.0.10.190, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified.]
System.IO.FileNotFoundException: Could not load file or assembly 'Authenticator, Version=2.0.10.190, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified.
File name: 'Authenticator, Version=2.0.10.190, Culture=neutral, PublicKeyToken=null'
   at YetAnotherRelogger.Helpers.Bot.DiabloClass.Start()
   at YetAnotherRelogger.Relogger.StartBoth(BotClass bot)
   at YetAnotherRelogger.Relogger.ReloggerWorker()

=== Pre-bind state information ===
LOG: DisplayName = Authenticator, Version=2.0.10.190, Culture=neutral, PublicKeyToken=null
 (Fully-specified)
LOG: Appbase = file:///E:/DB3/shared/YetAnotherRelogger-master/LatestBuild/
LOG: Initial PrivatePath = NULL
Calling assembly : YetAnotherRelogger, Version=1.1.5239.14810, Culture=neutral, PublicKeyToken=null.
===
LOG: This bind starts in default load context.
LOG: No application configuration file found.
LOG: Using host configuration file: 
LOG: Using machine configuration file from C:\Windows\Microsoft.NET\Framework\v4.0.30319\config\machine.config.
LOG: Policy not being applied to reference at this time (private, custom, partial, or location-based assembly bind).
LOG: Attempting download of new URL file:///E:/DB3/shared/YetAnotherRelogger-master/LatestBuild/Authenticator.DLL.
LOG: Attempting download of new URL file:///E:/DB3/shared/YetAnotherRelogger-master/LatestBuild/Authenticator/Authenticator.DLL.
LOG: Attempting download of new URL file:///E:/DB3/shared/YetAnotherRelogger-master/LatestBuild/Authenticator.EXE.
LOG: Attempting download of new URL file:///E:/DB3/shared/YetAnotherRelogger-master/LatestBuild/Authenticator/Authenticator.EXE.

N [5/6/2014 10:05:03 AM] Waiting 10 seconds and try again!
 
Also getting a Crash with assembly binding:

Code: 
N [5/6/2014 10:26:58 AM] Relogger Crashed! with message Could not load file or assembly 'Authenticator, Version=2.0.10.190, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified.
D [5/6/2014 10:26:58 AM] Exception: [Could not load file or assembly 'Authenticator, Version=2.0.10.190, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified.]
System.IO.FileNotFoundException: Could not load file or assembly 'Authenticator, Version=2.0.10.190, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified.
File name: 'Authenticator, Version=2.0.10.190, Culture=neutral, PublicKeyToken=null'
   at YetAnotherRelogger.Helpers.Bot.DiabloClass.Start()
   at YetAnotherRelogger.Relogger.StartBoth(BotClass bot)
   at YetAnotherRelogger.Relogger.ReloggerWorker()

WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].

N [5/6/2014 10:26:58 AM] Waiting 10 seconds and try again!
 
Updated / including ILMerge.exe - updated post-build command to merge Authenticator.dll, BouncyCastle.Crypto.dll, nunit.framework.dll, InputSimulator.dll into YetAnotherRelogger.exe
 
N [5/6/2014 11:52:56 AM] <Diablo 1> We are scheduled to start
N [5/6/2014 11:52:56 AM] Relogger Crashed! with message Could not load file or assembly 'Authenticator, Version=2.0.10.190, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified.
D [5/6/2014 11:52:56 AM] Exception: [Could not load file or assembly 'Authenticator, Version=2.0.10.190, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified.]
System.IO.FileNotFoundException: Could not load file or assembly 'Authenticator, Version=2.0.10.190, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified.
File name: 'Authenticator, Version=2.0.10.190, Culture=neutral, PublicKeyToken=null'
at YetAnotherRelogger.Helpers.Bot.DiabloClass.Start()
at YetAnotherRelogger.Relogger.StartBoth(BotClass bot)
at YetAnotherRelogger.Relogger.ReloggerWorker()

WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].

Help?
 
You must log in or register to reply here.
Back
Top