What's new
By:
  • Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • Visit Resources
  • Visit Downloads
  • Visit Portal

R-YAR - rrrix's YAR fork

NeoNeo99 said:
So here is the probelms I see. I launch YAR 0.2.0.8 and start allmy bots. When either DB or D3 crach YAR restarts then, but then I get this messsage "There is no profile loaded. Please load a profile before starting the bot."

The only way arounf this that I have found, is select the bot in the list and edit it. Just go through the wizard clicking next until, the last, then save. It workes then.

Here si what I see in the DB window though after this wrro, if you go and look at plugins, no plugins are listed. And if you look at the log, it says "TrinityMoveTo" is not supported, even thogu the Trinity plugin is in the Plugins folder. So it look liek after the crash its not relaoding the plugins.

Hope this helps. If you need any more inof please let me know.


View attachment 87039
Click to expand...

Can you post a log that actually shows this error, instead of "Authentication failed!
 
NeoNeo99 said:
View attachment 87053


WTH... I thought I selected the correct one. Sorry. this shoul dbe the correct one.
Click to expand...

Are you using my YAR version, and do you have "use Kickstart profile" enabled? You either need to use the built-in YAR kickstart profile, or roll your own kickstart profile.
 
rrrix said:
Are you using my YAR version, and do you have "use Kickstart profile" enabled? You either need to use the built-in YAR kickstart profile, or roll your own kickstart profile.
Click to expand...

Well I have the "Use Kickstart" option selected, but not the "Always generate new kickstart profile" selected. I will try it with that on and see what happens.
 
rrrix said:
Are you using my YAR version, and do you have "use Kickstart profile" enabled? You either need to use the built-in YAR kickstart profile, or roll your own kickstart profile.
Click to expand...


Sorry i forgot to answer you, yes I am using your verison 0.2.0.8. the latest that is up there.
 
NeoNeo99 said:
Well I have the "Use Kickstart" option selected, but not the "Always generate new kickstart profile" selected. I will try it with that on and see what happens.
Click to expand...

Well it still happenseven woth bot optiosn selected. And the Kickstart profiel delay is set to the default 5 seconds. Where is this Kickstart profile located? Do I have to do somethign with it, like put it somewhere?
 
NeoNeo99 said:
Well it still happenseven woth bot optiosn selected. And the Kickstart profiel delay is set to the default 5 seconds. Where is this Kickstart profile located? Do I have to do somethign with it, like put it somewhere?
Click to expand...

It should automatically generate the profile, named "YAR_kickstart.xml" in the same directory as the profile. Can you post your YAR log?
 
Sure can. So I have included the most recent run, and attached the YAR Log and DB log for the copy that had the problem at this time.

View attachment 2013-04-02 09.00.txt
View attachment 4724 2013-04-02 09.17.txt

It happened this time, right off the bat, the very first bot. Like I said in the previous post, when this happens if you go to the Db window and choose plugins, there are no plugins listed. So for some reason they are not beign loaded. And to fix this, I just go and go through the profile wizard setting up the profies again,then it works until the next time eitehr DB or D3 crash and YAR tries to restart it.

Hope this helps let me know if you need anything else.
 
NeoNeo99 said:
Sure can. So I have included the most recent run, and attached the YAR Log and DB log for the copy that had the problem at this time.

View attachment 87167
View attachment 87168

It happened this time, right off the bat, the very first bot. Like I said in the previous post, when this happens if you go to the Db window and choose plugins, there are no plugins listed. So for some reason they are not beign loaded. And to fix this, I just go and go through the profile wizard setting up the profies again,then it works until the next time eitehr DB or D3 crash and YAR tries to restart it.

Hope this helps let me know if you need anything else.
Click to expand...

You better double-double, maybe, even triple check that you have the Kickstart option enabled, and try 'Always generate new kickstart profile'.

Also - try a different profile - maybe use My Act 3 Inferno profile (which has it's own included relogger file - the "START_HERE.xml").
 
Hey rrix,

thanks for another improvement.

I am trying to use your version of YAR but it is not loading the profile, it creates the game the just sits in town... works fine on the original YAR. Is it because I copied the settings directly over from the original YAR?
 
when I load the game and db normally, everything works fine for me.
it also works fine if i open YAR and have it start the game/db AFTER i have opened them manually.

BUT if the game crashes and YAR tries to open it itself, it wont work. none of my plugins load, no profile loads, i get a popup message saying "there is no profile loaded, please load a profle before starting the bot". if i click on the plugin tab on DB, there are no plugins showing up at all (i use trinity, radsatom, and yar)

the DB log looks like this:

[08:33:42.792 N] Demonbuddy v1.0.1370.304 started
[08:33:42.881 N] Logging in...
[08:33:43.681 N] Attached to Diablo III with pid: 8140
[08:33:48.037 N] Failed to load profile: Element TrinityMoveTo is not supported. Please check your XML and try again. (<TrinityMoveTo navigation="true" questId="1" x="2719.076" y="2689.84" z="25.43893" pathPrecision="10" name="Skycrown-01" />) Line 31
[08:33:48.145 N] Chose GilesPlugin as your combat routine.


when this happens, yar will not work again. so basically i can use yar to start my game/bot once, but if anything ever crashes yar fails to restart it correctly. (which defeats the use of using yar)

after this happens, the only way to manually start game/bot is to:
1. open the game
2. log in and be at the character select
3. open DB
4. log in DB and start

if i dont do those in that specific order, DB will not work and again plugins will not load.

the problem is that yar itself opens the game, THEN opens db, THEN logs into the game.
when done in this order, none of the plugins and profiles load.
THE GAME HAS TO LOG IN BEFORE DB LOGS IN FOR THE PROFILES/PLUGINS TO LOAD. and i cant find any option in yar that does it. yar automatically logs into DB before logging into D3.

please tell me how to fix this, or maybe add an option to YAR that starts and logs in D3 BEFORE starting and logging in DB.


ALSO
if i edit the yar profile (not even change anything, just click next in all the windows and save at the end) then it will start DB correctly and profiles/plugins will load even though it still logs DB in before D3. but again that defeats the purpose of the relogger, because i cant edit the yar profile every time my game crashes just so it starts up again.



==============================



SUMMARY:
-when YAR is running and game crashes, plugins/profiles in DB will not load AFTER YAR attempts a restart.
-if YAR profile is editted, then everything starts working fine.
-if D3 is logged into BEFORE DB, then also everything works fine.
-leaving YAR to itself however, will not work because it logs in DB before D3, and obviously because it doesnt edit its own profiles to reset.
 
Last edited:
db:
[18:57:42.104 N] [Trinity]ItemRules loaded a total of 289 Soft rules!
[18:57:42.108 N] [Trinity]ENABLED: Trinity v1.7.2.10 now in action!
[18:57:42.115 N] Waiting 5.6 seconds before next game...
[18:57:42.607 N] [YetAnotherRelogger] Force enable: "ArcanumClicker"
[18:57:42.607 N] [ArcanumClicker] Enabled!
[18:57:42.607 N] [YetAnotherRelogger] Force enable: "AutoPotion "
[18:57:42.607 N] [YetAnotherRelogger] Force enable: "Trinity"
[18:57:42.607 N] [YetAnotherRelogger] Force enable: "Uniddealer"
[18:57:42.607 N] [YetAnotherRelogger] Force enable: "YAR Comms"
[18:57:42.795 N] [YetAnotherRelogger] Recieved MonsterPowerLevel: -1
[18:57:47.800 N] Creating new game. Params: [Act:A3 Difficulty:Inferno Quest:101758 QuestStep:1 ResumeFromSave:False IsPrivate:True Handicap:0]
[18:57:55.546 N] GameChanged. Clearing actors
[18:57:57.200 N] Loaded profile [Galkaizer] APD v5.13
[18:57:59.004 N] [YetAnotherRelogger] Restarting bot
[18:57:59.005 N] Stopping the bot.
[18:58:00.723 N] Loaded profile [Galkaizer] APD v5.13
[18:58:00.927 N] Bot Thread Ended. Was this requested?
yar:
N [2013.04.01 18:54:42] <******> Demonbuddy:5040: Delayed start failed! (0.6933666 seconds overtime)
then kills d3 and db and after restart the same..
after several restarts bot load profile and goes like nothing happened. weird.
Click to expand...

i have the same problem any way to fix it?
 
THANK YOU SO MUCH RRRIX!!!! I have been stuck using the not as good 0.0.1 Beta or w.e as the newest version does not work with Trinity 1.7.2.11 just stands in town resetting game creation netting 10,XXX games / hour =/. Very glad YAR is being continued to be taken care of :) Will download and test ASAP.
 
Hey is this just like the old YAR where I only need the YAR.exe? I never had to extract it to the demonbuddy plugins folder before. Thanks in advance
 
rrrix said:
You better double-double, maybe, even triple check that you have the Kickstart option enabled, and try 'Always generate new kickstart profile'.

Also - try a different profile - maybe use My Act 3 Inferno profile (which has it's own included relogger file - the "START_HERE.xml").
Click to expand...


Sorry this took so long to get back I have been really busy. Anyway, it seems to work now, but I thik the differennce is and I dotn know why, I added the QuestTools plugin (becasue I saw it listed with your "My Act 3 Infreno profile". Even if I run other profiels now, it seems to work fine. If DB or D3 crash and YAR restarts them, it logs in fie and runs. Not yet ready to say it works all the tme now, but its looking good. I think as test I will remove QuestTools plugin from a couple bots and do a run and see what happens. I will report back my findings. But thanks for your help.
 
This is exactly what I have been seeing for a while now. I have several posts with rrrix about this (see previous posts). I tried something that he asked me to try and it seems to work now.

from rrrix:
You better double-double, maybe, even triple check that you have the Kickstart option enabled, and try 'Always generate new kickstart profile'.

Also - try a different profile - maybe use My Act 3 Inferno profile (which has it's own included relogger file - the "START_HERE.xml").

So when I tried his profiles I also loaded the QuestTools plugin. Everything started working then. Even all my other profiles that I like to run. I dont know if there is a correlation there or not. I will be running some test's ASAP, by removing QuestTools from a specific Bot or 2 and see how they run, see if they start acting up again. I will let you know what I find.


mcchokolat said:
when I load the game and db normally, everything works fine for me.
it also works fine if i open YAR and have it start the game/db AFTER i have opened them manually.

BUT if the game crashes and YAR tries to open it itself, it wont work. none of my plugins load, no profile loads, i get a popup message saying "there is no profile loaded, please load a profle before starting the bot". if i click on the plugin tab on DB, there are no plugins showing up at all (i use trinity, radsatom, and yar)

the DB log looks like this:

[08:33:42.792 N] Demonbuddy v1.0.1370.304 started
[08:33:42.881 N] Logging in...
[08:33:43.681 N] Attached to Diablo III with pid: 8140
[08:33:48.037 N] Failed to load profile: Element TrinityMoveTo is not supported. Please check your XML and try again. (<TrinityMoveTo navigation="true" questId="1" x="2719.076" y="2689.84" z="25.43893" pathPrecision="10" name="Skycrown-01" />) Line 31
[08:33:48.145 N] Chose GilesPlugin as your combat routine.


when this happens, yar will not work again. so basically i can use yar to start my game/bot once, but if anything ever crashes yar fails to restart it correctly. (which defeats the use of using yar)

after this happens, the only way to manually start game/bot is to:
1. open the game
2. log in and be at the character select
3. open DB
4. log in DB and start

if i dont do those in that specific order, DB will not work and again plugins will not load.

the problem is that yar itself opens the game, THEN opens db, THEN logs into the game.
when done in this order, none of the plugins and profiles load.
THE GAME HAS TO LOG IN BEFORE DB LOGS IN FOR THE PROFILES/PLUGINS TO LOAD. and i cant find any option in yar that does it. yar automatically logs into DB before logging into D3.

please tell me how to fix this, or maybe add an option to YAR that starts and logs in D3 BEFORE starting and logging in DB.


ALSO
if i edit the yar profile (not even change anything, just click next in all the windows and save at the end) then it will start DB correctly and profiles/plugins will load even though it still logs DB in before D3. but again that defeats the purpose of the relogger, because i cant edit the yar profile every time my game crashes just so it starts up again.



==============================



SUMMARY:
-when YAR is running and game crashes, plugins/profiles in DB will not load AFTER YAR attempts a restart.
-if YAR profile is editted, then everything starts working fine.
-if D3 is logged into BEFORE DB, then also everything works fine.
-leaving YAR to itself however, will not work because it logs in DB before D3, and obviously because it doesnt edit its own profiles to reset.
Click to expand...
 
NeoNeo99 said:
Sorry this took so long to get back I have been really busy. Anyway, it seems to work now, but I thik the differennce is and I dotn know why, I added the QuestTools plugin (becasue I saw it listed with your "My Act 3 Infreno profile". Even if I run other profiels now, it seems to work fine. If DB or D3 crash and YAR restarts them, it logs in fie and runs. Not yet ready to say it works all the tme now, but its looking good. I think as test I will remove QuestTools plugin from a couple bots and do a run and see what happens. I will report back my findings. But thanks for your help.
Click to expand...

I guess you missed the part of of my profile where it says "REQUIRED PLUGINS" :)
 
I had similar issues , I resolved this by checking force plugin , under edit for each of your bots .
I tested it simply by Xing out d3 and letting yar reopen it and log in.

hope that helps you guys.
 
You must log in or register to reply here.
Back
Top