[Questing/N/R] Stonecore Endless Mountrun

[AknA]

[N][R][Questing] Stonecore Endless Mountrun

FAQ!

What is Stonecore Endless Mountrun?
Stonecore Endless Mountrun is a farming profile that will run Stonecore Dungeon to obtain the mount.

What does Stonecore Endless Mountrun do ?
It runs The Stonecore and clear the trash up to Slabhide, it kills Slabhide and loot him in hope to get Reins of the Vitreous Stone Drake.
Once Slabhide is killed and looted, it will exit the instance.
It will then check if you need to repair, if you do, it will run to the horde/alliance vendor and repair, then move back to instance entrance.
It will reset the instance and enter again.
If you happend to enter too many instances, bot will fly back, wait 1 minute and try to enter instance again.

How do I use this ?
Select Questing bot and load the profile and click start.

Where can I start this ?
Either inside The Stonecore or while you're in Deepholm.
If you are in Deepholm then do NOT start the profile while you are inside the Temple of Earth as bot can't navigate correctly there.

This doesn't work ?
Then please write a post and include a log and explain what isn't working.

Known bugs ?
Some people have problems with the InteractWith Quest Behavior (ver 1.80), in ver 1.81 it runs back to entrance instead of using the portal to prevent it.

Special thanks?
The original profile was created by ShaneMag85 but it stopped working and he stopped playing.
So I rewrote most of it and adding repair vendors and a few behaviors to make it run smoother.

I love this, do you accept donations ?
Yes, at the bottom of the post you can see a link if you have a coin to spare.

 

[neversaynever]

Running it now!

2 runs so far without a mistake!

 

[koxie]

Hello I will dowload it and test it (report later).. See you soon buddy

 

[koxie]

Works fine using CDS was warrior I would like to see it using my "Enraged regeneration" but anyways fine work keep it up

 

[AknA]

Works fine using CDS was warrior I would like to see it using my "Enraged regeneration" but anyways fine work keep it up

That is handled by your CC not by a profile.

 

[neversaynever]

That is handled by your CC not by a profile.

I keep getting 'you've entered too many instances recently'

 

[AknA]

I keep getting 'you've entered too many instances recently'

Each run will take atleast 12 mins and 30 secs, if you run it faster than that then you will wait inside until that time has passed.
You can do 5 instances / hour.
5 x 12 mins and 30 secs = 1 hour 2 mins and 30 secs.
So you must had done a instance earlier on that char or any other char on your account.

 

[jaxlad]

im finding that after the boss is done my toon is trying to run out and getting stuck can you fix this

p.s i have noticed that it leaves ok if i manually click the portal near the boss and leave it

 

[sassiman]

Really good profile. The only thing bugging me is that my toon cant find the repair. (H lvl 90) Otherwise, highly recommended!

 

[AknA]

View attachment 99036im finding that after the boss is done my toon is trying to run out and getting stuck can you fix this

p.s i have noticed that it leaves ok if i manually click the portal near the boss and leave it

Hmm... it should use the portal, to get back to entrance but it uses a QB that is a bit dodgy.
I have to get some sleep now, starting work at 03.00 tomorrow but I'll look at it when I get home.

 

[AknA]

Really good profile. The only thing bugging me is that my toon cant find the repair. (H lvl 90) Otherwise, highly recommended!

Hmm... it should find the repair guy unless I farked it up, I did a test and it flew fine to him on my test run.
Could you please post your log when it failed to go repair (if you can find it) and I can see what isn't working proparly.

 

[sassiman]

Hmm... it should find the repair guy unless I farked it up, I did a test and it flew fine to him on my test run.
Could you please post your log when it failed to go repair (if you can find it) and I can see what isn't working proparly.

Sure thing, he was flying back into tempel of earth, by the mailbox. Will post log if i have to repair again befor i get the mount Again, great profile.

PS: I use mining also. So I dont have to w8 so long between the runs. Profit

 

[chucky30]

Hi having problem my toons a hunter and Polly both level 90 477 pvp gear just run passed most of the mobs and get kkilled using TUANHA PALADIN and hunter cc

 

[neversaynever]

It dropped after 15 runs !

 

[AknA]

Hi having problem my toons a hunter and Polly both level 90 477 pvp gear just run passed most of the mobs and get kkilled using TUANHA PALADIN and hunter cc

That seems like a CC issue or if you have some strange settings in HB, this profile has nothing to do with not attacking mobs, well it avoids 2 mobs, the first boss and Millhouse Manastorm.

 

[AknA]

It dropped after 15 runs !

Gratz

 

[chucky30]

running good now it was cc
doing it on a hunter 6.25 min per run ret pally 6.15 mins no mount yet had to add time on wait lol

 

[chucky30]

wish there was a way to see how many tie u run this
after go to sleep

 

[shjjashik]

Two things I encountered while trying to run this profile.
1.) When trying to run this as a rogue (my main/only 90) he will stealth behind Slabhide and try to ambush and get the error message "you must be behind the target" over and over again. I found a simple Shadowstep will fix this (I know that not everyone will be spec'd into this) just something I found as a quick fix.
2.) Profile will not reset the instance and in Honorbuddy I'm getting an error message: "Error trying to save the settings file: The requested operation cannot be performed on a file with user-mapped selection open." Not entirely sure what this means.

Attached is a log in case I'm doing something wrong since it seems like the profile is working for other people.
Any help would be greatly appreciated.

 

[AknA]

Two things I encountered while trying to run this profile.
1.) When trying to run this as a rogue (my main/only 90) he will stealth behind Slabhide and try to ambush and get the error message "you must be behind the target" over and over again. I found a simple Shadowstep will fix this (I know that not everyone will be spec'd into this) just something I found as a quick fix.
2.) Profile will not reset the instance and in Honorbuddy I'm getting an error message: "Error trying to save the settings file: The requested operation cannot be performed on a file with user-mapped selection open." Not entirely sure what this means.

Attached is a log in case I'm doing something wrong since it seems like the profile is working for other people.
Any help would be greatly appreciated.

1) That is not a profile issue, that is a CC issue. My profile tells HB to attack the mob, then the way you attack the mob is handled by the CC.
2) Looking in the log I see that the instance gets reset, then if it can't reset the instance due to that you have run too many within an hour I can't tell, the log shows that the instance reset command was sent correctly.
The "Error trying to save the settings file" is not caused by the profile, I've never seen that error before but I guess it's from some kind of Plugin.