[Quest Behavior] Natfoth's QB MegaThread

Natfoth · Feb 13, 2011

Try using BasicInteractWith rather then InteractWith.

laria · Feb 15, 2011

I tried the Escort-Behaviour and i get:

Code:

[08:31:28:207] System.ArgumentOutOfRangeException: Index was out of range. Must be non-negative and less than the size of the collection.
Parameter name: index
   at System.ThrowHelper.ThrowArgumentOutOfRangeException(ExceptionArgument argument, ExceptionResource resource)
   at System.ThrowHelper.ThrowArgumentOutOfRangeException()
   at System.Collections.Generic.List`1.get_Item(Int32 index)
   at Styx.Bot.Quest_Behaviors.Escort.<CreateBehavior>b__5(Object ) in c:\Users\Sam\Downloads\hb2_BETA\Quest Behaviors\Escort.cs:line 100
   at TreeSharp.Action.RunAction(Object context)
   at TreeSharp.Action..MoveNext()
   at TreeSharp.Composite.Tick(Object context)
   at TreeSharp.Decorator..MoveNext()
   at TreeSharp.Composite.Tick(Object context)
   at TreeSharp.PrioritySelector..MoveNext()
   at TreeSharp.Composite.Tick(Object context)
   at TreeSharp.PrioritySelector..MoveNext()
   at TreeSharp.Composite.Tick(Object context)
   at QuestBot.Actions.ForcedBehaviorExecutor..MoveNext()
   at TreeSharp.Composite.Tick(Object context)
   at QuestBot.Actions.ForcedBehaviorExecutor..MoveNext()
   at TreeSharp.Composite.Tick(Object context)
   at QuestBot.Actions.ForcedBehaviorExecutor..MoveNext()
   at TreeSharp.Composite.Tick(Object context)
   at TreeSharp.PrioritySelector..MoveNext()
   at TreeSharp.Composite.Tick(Object context)
   at TreeSharp.PrioritySelector..MoveNext()
   at TreeSharp.Composite.Tick(Object context)
   at Styx.Logic.BehaviorTree.TreeRoot.()

Part from my profile:

Code:

    <If Condition="(HasQuest(8483)) &amp;&amp; (!IsQuestCompleted(8483))">
        <CustomBehavior File="Escort" QuestId="8483" NpcId="15420" X="9291.544" Y="-6682.769" Z="22.41854" />
    </If>

Kickazz006 · Feb 15, 2011

when I use Escort.. it FollowsNpc it just fine, but after the initial combat sequence, it doesn't want to *always* attack stuff. I have to back my toon up 5-10 yards and then the CB kicks in. and sometimes not even then

PHP:

		<!-- Escort Quest, CB currently has issues
		<PickUp QuestName="Escape from Umbrafen" QuestId="9752" GiverName="Kayra Longmane" GiverId="17969" X="-931.8848" Y="5283.565" Z="23.89816" />
			<If Condition="((HasQuest(9752)) &amp;&amp; (!IsQuestCompleted(9752)))" >
				<CustomBehavior File="Escort" QuestId="9752" NpcId="17969" X="-931.8848" Y="5283.565" Z="23.89816" />
			</If>
		<TurnIn QuestName="Escape from Umbrafen" QuestId="9752" TurnInName="Ysiel Windsinger" TurnInId="17841" X="-143.4519" Y="5533.816" Z="31.06601" />
		 -->

Zangar Escort quest from the Umbrafen Tribe section. I tried 1.1.0.0 version, and the HB-shipped version

PHP:

[8:28:23 PM:863] You are a level 69 Feral Druid
[8:28:26 PM:880] Goal: Goal: Grind to level 62
[8:28:27 PM:95] Picking up Escape from Umbrafen : 9752
[8:28:27 PM:95] Goal: Picking up Escape from Umbrafen
[8:28:27 PM:101] Changed POI to: Type: QuestPickUp
[8:28:27 PM:751] interact: 0x1D76AF08
[8:28:27 PM:784] interact done: 0x1D76AF08
[8:28:30 PM:577] Cleared POI - Reason Quest Completed
[8:28:30 PM:577] Cleared POI
[8:28:31 PM:410] Activity: Loading Tile/s
[8:28:31 PM:410] Loading Expansion01_22_33
[8:28:37 PM:469] Unstuck attempt 1
[8:28:37 PM:469] Unstuck attempt 2
[8:28:37 PM:683] Unstuck attempt 3
[8:28:40 PM:386] Unstuck attempt 1
[8:28:40 PM:386] Unstuck attempt 2
[8:28:40 PM:725] Spell_C::CastSpell(768, 0, 0x0, 0) [1]
[8:28:40 PM:728] -Cat Form
[8:30:22 PM:73] Activity: Combat

Natfoth · Feb 15, 2011

Looking into the escort quest now, also laria your bug should be fixed in the next release.

vlad0327 · Feb 17, 2011

CastSpellOn not working.

my profile part

PHP:

<CustomBehavior File="CastSpellOn"
                   QuestId="25167"
                   SpellId="56641"
                   NpcId="39251"
                   NumOfTimes="3"
				  
                   X="-1041.979" Y="-4726.71" Z="15.58202" />

debug log output

PHP:

[18:44:24:123] Styx.InvalidObjectPointerException: Cannot read a descriptor on an invalid object.
   at Styx.WoWInternals.WoWObjects.WoWObject.[T](UInt32 field)
   at Styx.WoWInternals.WoWObjects.WoWObject.[T](Int32 offsetIndex)
   at Styx.WoWInternals.WoWObjects.WoWUnit.get_Flags()
   at Styx.WoWInternals.WoWObjects.WoWUnit.( flags)
   at Styx.WoWInternals.WoWObjects.WoWUnit.get_CanSelect()
   at Styx.WoWInternals.WoWObjects.WoWUnit.Target()
   at Styx.Bot.Quest_Behaviors.CastSpellOn.CastSpell() in c:\dl\Honorbuddy 2.0.0.4075\Quest Behaviors\CastSpellOn.cs:line 229
   at Styx.Bot.Quest_Behaviors.CastSpellOn.<CreateBehavior>b__b(Object ) in c:\dl\Honorbuddy 2.0.0.4075\Quest Behaviors\CastSpellOn.cs:line 203
   at TreeSharp.Action.RunAction(Object context)
   at TreeSharp.Action..MoveNext()
   at TreeSharp.Composite.Tick(Object context)
   at TreeSharp.Decorator..MoveNext()
   at TreeSharp.Composite.Tick(Object context)
   at TreeSharp.PrioritySelector..MoveNext()
   at TreeSharp.Composite.Tick(Object context)
   at TreeSharp.PrioritySelector..MoveNext()
   at TreeSharp.Composite.Tick(Object context)
   at QuestBot.Actions.ForcedBehaviorExecutor..MoveNext()
   at TreeSharp.Composite.Tick(Object context)
   at TreeSharp.PrioritySelector..MoveNext()
   at TreeSharp.Composite.Tick(Object context)
   at TreeSharp.PrioritySelector..MoveNext()
   at TreeSharp.Composite.Tick(Object context)
   at Styx.Logic.BehaviorTree.TreeRoot.()
[18:44:24:124] Cleared POI - Reason Exception in Root.Tick()
[18:44:24:124] Cleared POI
[18:44:24:177] Start/Stop button pressed.
[18:44:24:182] Stop called!

Natfoth · Feb 19, 2011

V1.2.0
- Updated all of the behaviors to use the Arg Checking system
- UseItemOn now has a Range as optional
- NoCombatVehicle will redo the quest if it was not completed on the first round
- Added a Kill Mob X Times behavior for those pesky kill any mob quests (Supports up to 3 Mobs)
- UseItemTargetLocation now has Multiple Times
- UseItemTargetLocation now has a Min Range (Optional)
- UseItemOn can now support dead targets (Optional)
- CombatUseItem is no longer Hard coded to my worgen profile
- Vehicle Behavior LUA should be working fully again
- UseItemOn can now be used to "Capture" mobs or used when mob is at x% HP
- UseItemOn will now support Ranged Targets, Such as Shooting Birds down.
- WaitTimer will now accept an Optional QuestID
- Added GoalText and StatusText to all of the behaviors
- Lots of behaviors will repeat now if QuestID > 0, leave the QuestID out if you only want it do it once.

laria · Feb 20, 2011

I appreciate your work on all these behaviours.

Why does UseItemOn.cs only have:

Code:

            {"ItemId",null},
            {"Range",null},
            {"NpcId",null},
            {"NpcId2",null},
            {"NpcId3",null},
            {"NumOfTimes",null},
            {"HpLeftAmount",null},
            {"InCombatHPUse",null},
            {"FactionID",null},
            {"WaitTime",null},
            {"QuestId",null},
            {"X",null},
            {"Y",null},
            {"Z",null},

but
CombatUseItemOn has an additional?

Code:

        public int HasAura { get; set; }

There are quests, where you dont get into combat and still need to check buffs on the enemy

If you have Quests, where you more or less stay where you are and have to protect an object from being destroyed or an npc from getting killed by incoming attackers, escort behaviour isn't the one to use. It considers the quest to be done when you arrive at a location i think. So it just stands there, letting the quest fail and in the end you likely die from the incoming waves of attackers yourself.

I'd love to see something like:

Defend.cs
Arguments:
NPC/Object-ID to protect
Type= NPC/Object
Location: X Y Z

Targeting, in case you can influence it, should be primary on those that are attacking the npc/object that needs to be defended.

In case you fail, it would be nice to abandon that quest and retake it. So maybe an additional questgiver argument (with optional location) might be useful as well.

marcoman · Feb 21, 2011

I would also like to see that defend behavior, there are some quests i really don't know workaround in that kind of situation.

Natfoth · Feb 21, 2011

marcoman said:
I would also like to see that defend behavior, there are some quests i really don't know workaround in that kind of situation.

The escort behavior will be able to do this aswell once everything is worked out in it.

Natfoth · Feb 23, 2011

V2.0
- Massive Massive changes to the behaviors, They are all now fully converted to use a new far fast and use better methods then what was used in the past
- All behaviors now use a Progressive Scanning feature like HB does rather then just searching nearby once you reach the location. This will make all behaviors faster
- All behaviors now go off a new timer system so that they will always defend themselves, Except the NoCombat behaviors that are designed not to engage combat
- All behaviors are rewritten, however very few changes to the profiles should occure
- NoCombatVehicle has been merged so it should now use SpellIndex rather then the SpellID, so that you can just do the Button Bar Number For easier use
- Greatly Updated the logic of all behaviors to be far smarter and more advanced then they were before
- Documentation has been added to every behavior
- Updated all Status and Goal Messages to match that of HB's and to include better information
- All Behaviors that use item now use the HB API to do so
- Will spit out the Name of the item being used, Npcs that it is attacking, and spells being casted for easier understanding

This is just a test release, please report all and any bugs to this thread and I will fix them up ASAP. Thanks ~ Natfoth.

highvoltz · Feb 23, 2011

Looking good, keep them coming

joejoe317 · Feb 23, 2011

how would you use acceptquestlog and completequestlog. Are these for the quest pop ups? PLEASE SAY THEY ARE!

Natfoth · Feb 23, 2011

AcceptQuest has been put into Complete Log, but it is for "In the Field" Quests that you turn in on the spot rather then running back.

joejoe317 · Feb 23, 2011

so they are for the ones that pop up, however you are still able to get them from an npc... i know there are a few like that in stv....

But from what i gathered, they are not for just quest pop ups that do not have an assigned npc to that particular quest, kind of like some of the quests in deepholm...

Are my assumptions correct?

Natfoth · Feb 23, 2011

You are able to use it even if there is no NPC assigned to it. As long as it is in your log and it says Click to Complete then it will work. Regardless if a NPC is hooked up to it or not.

joejoe317 · Feb 24, 2011

Oh ok, do you think the popup quests that need to be clicked on to accept will ever be added, if so, is that more of a integration into hb, or is that something a custom behavior should take care of? I remember researching it, and i found some of the script stuff for the popups, but when i couldnt get it to accept by running any scripts.

vlad0327 · Feb 24, 2011

VehicleMover does not work. goes to the XYZ and then stops profile execution with no errors in the log. the next tag in the profile is simply never executed.

Natfoth · Feb 26, 2011

Updated the latest version to fix a lot of stuff. Try the new one. Will make a changelog later.

vlad0327 · Feb 27, 2011

CastSpellOn now works thanks! But no VehicleMover in the 2.0.2 release

Tony · Mar 2, 2011

thx again for your great work Nat

[Quest Behavior] Natfoth's QB MegaThread

Community Developer

Well-Known Member

Well-Known Member

Attachments

Community Developer

New Member

Community Developer

Well-Known Member

Member

Community Developer

Community Developer

Well-Known Member

New Member

Community Developer

New Member

Community Developer

New Member

New Member

Community Developer

New Member

"The Bee"