What's new
  • Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • Visit Resources
  • Visit Downloads
  • Visit Portal
RebornBuddy Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

[Professionbuddy] Leatherworking + Skinning Alliance + Horde 1-525

The worst coded profiles i'v ever seen. First off, the "protected items" file you got, makes the bot sell everyting. Skinning knife, leather, all of it.
And the coding is just awful, even with flying enabled it runs on the ground strait thru gates of orgrimmar, looks really boty. Dont find the enterance to leatherworking vendor/trainer house, just runs at a wall for hours.
 
Works fine for the most part but you need to implement a check for skinning.
Once it reaches max level (while farming mediem leather) it stops skinning and just runs around killing stop endlessly and gets into an infinite loop :(
If you start/stop, it checks and trains, if you manually train and start it continues.
But it spent 8 hours killing stuff without skinning in STV :(

@Hint. I bet you started proffesionbuddy and it autoupdates first time, always does, it also overwrites protected items.xml, so in essence, you need to copy over protected xml twice before you start botting or it will sell everything.....stated multiple times.
 
Last edited:
Looks promising, ill give it a shot and give some feedback.

beware using this it sold my lethers and gets stuck alot doenst level leatherworking after 132 and skins medium leather over and over i had to switch on another skinning profile and ill just do leatherworking by hand once i have most the mats again would not recomend this to any member until its been looked at but from the thread kinda looks abandend.
 
<While Condition="InbagCount (4235) &gt;= 20 &amp;&amp; Leatherworking.Level &gt;= 150 &amp;&amp; Leatherworking.Level &lt; 165" IgnoreCanRun="True">
<If Condition="Leatherworking.Level &gt;= 155 &amp;&amp; Leatherworking.Level &lt; 165" IgnoreCanRun="True">
Section for Heavy Hide, the 155 needs to be changed to 150, otherwise it'll never continue LW past 150.
In the skinning profile:
<While Condition="(Me.GetSkill(Styx.SkillLine.Leatherwork ing).CurrentValue &gt;= 425) &amp;&amp; (Me.GetSkill(Styx.SkillLine.Leatherworking).Curren tValue &lt; 425)" >


2nd 425 needs to be changed to 500 otherwise you get that 'stopping due to nothing to do' issue.


Fixed everything for me, ty
 
I have an problem as Druid. When i am transformed in a bear he always tried to collect the items from the enemy in the bear transformation . But most of the time it buggs and he is trying it everytime on the same enemy.

Skill: lowlevel Skinning
Where: Elwynn
Enemy: Bear
 
Changed "line 832" in Alpha LW 500 + skin.xml
<While Condition="InbagCount (72120) &gt;= 150 &amp;&amp; Leatherworking.Level &gt;= 526 &amp;&amp; Leatherworking.Level &lt; 570" IgnoreCanRun="True">
to
<While Condition="InbagCount (72120) &gt;= 150 &amp;&amp; Leatherworking.Level &gt;= 500 &amp;&amp; Leatherworking.Level &lt; 570" IgnoreCanRun="True">

So that it doesn't stand at the trainer and trying to salvage Sha-touched leather for eternity.
 
I'm having a problem with this profile. I used it last night for a few hours while I was in bed. I looked up after a couple of hours and my character was still skinning the same people as from hours back that were gray and didn't even get his skinning up anymore. Also, he did no leatherworking, just stayed in the one area outside of ogrimmar. Any suggestions or help please?
 
Starting the bot!
Currently Using BotBase : ProfessionBuddy
Changing current profile to [A] Skinning 1-525 [Kick] ($Rev: 2180 $)
[Singular] attention: Pull Distance set to 45 yds by ProfessionBuddy, Plug-in, Profile, or User
Welcome to [PB] Leatherworking + Skinning 1- 500
Leatherworking level is 110
Skinning Level is 77
Changing current profile to [Alliance] Skinning 1-525 [Alpha]
[Profile Message]: Loading Alliance Alpha QO for LW + Skinning PB profile
[Singular] attention: Pull Distance set to 35 yds by ProfessionBuddy, Plug-in, Profile, or User
Bot Stopped! Reason: Reached GrindTo (level: -1) without a current grind area. Can't continue.

Anyone have an idea of why the bot stops like this as soon as I start it? =/
 
I think I'm in love with you, LWing is my least favorite profession to level, thank you for helping me be lay as hell.
 
Occasionally at low skinning/lw levels it tries to convert scraps -> light leather but can't on my druid as you can't do it while shapeshifted (so it just sits there trying to do it till I manually shapeshift it). Anyone figure out a way to remedy this?
 
It works ok. not afkable you need to keep an eye on it. The only problem i had today is that it farmed for 8 hours and then the bags where full and the protected-items you added dont work at all.. somehow it sold 8hours worth of skinning.. to bad there is no decent lw profile out here

Thanks for trying anyway
 
It works ok. not afkable you need to keep an eye on it. The only problem i had today is that it farmed for 8 hours and then the bags where full and the protected-items you added dont work at all.. somehow it sold 8hours worth of skinning.. to bad there is no decent lw profile out here

Thanks for trying anyway

Sold EVERYTHING include [Shroud of Cooperation] and other mats i had in my bag. Sorry this is not up to date. Worth trying tho.
 
hmmm, does not really work, constantly just grinds hour after hour leather, never get's to a trainer to actually train something :(
 
Thats because it tries to farm all the materials needed to level up LW for example from 195 to 200 or something like that. The profile works Ok. if you stay and watch the bags and sell manualy in time.
Depends on what level LW you are. if ur @ heavy leather yes.. its gonna take a while.
 
Hey, found alittle something you can fix :) at the start of the guide as a feral druid i can't make the [Ruined Leather Scraps] in to [Light Leather] while in cat form. the same gose for guardian. so if you can somehow make it get out of the shapeshiftform before converting the leather. that would be nice.
 
Starting bot,

Welcome to [PB] Leatherworking + Skinning 1- 500
Im a Worgen. Skinning Level increaced by 15
Skinning Level is 165
Leatherworking level is 42
We are stuck!!
Trying dismount
We are stuck!!
Trying strafe left for 1000ms
PB 1.595: Done training
[Profile Message]: Loading Alliance Alpha QO for LW + Skinning PB profile
[Singular] attention: Pull Distance set to 35 yds by ProfessionBuddy, Plug-in, Profile, or User
Stopping the bot!
Bot Stopped! Reason: User pressed the stop button

stands by trainer all the time and does nothing
 

Attachments

  • Untitled.jpg
    Untitled.jpg
    374.8 KB · Views: 570
Hello, im new on this forum, but im having a problem with the bot, it farms all the leather and then it sells it on the vendor and it doesnt not raise the LW profession as it should, is there any configuration so the bot stops selling all the farmed leather?
 
Back
Top