What's new
By:
  • Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • Visit Resources
  • Visit Downloads
  • Visit Portal

[Plugin] Giles Trinity

Status
Not open for further replies.
v1.4.6.1 uploaded:
- Bot should now be able to use both Whirlwind, and Tempest Rush, to move towards avoidance safe-spots, if these abilities are available.
- Fix for whirlwind sometimes targeting wrong area.
- Whirlwind now has a slightly wider arc it can randomly WW within within the general direction of the target.
- Will now ignore health globes further than 35f away to help avoid stucks.
- Having a large "Pickup radius" should no longer make your bot never move for a health-globe already within that radius.
- Pestilence Hand priority increased.
- Default options now ignore all blue jewelry for pickups.
- Changes to priority of various objects mid-combat.


IMPORTANT: Updating Plugin Versions:
To minimize or fix problems (random slowdowns, oddities with avoidance settings ignoring certain avoidance types), you should do the following things every time you update Giles Trinity or if you get any problems after updating;
1: Make sure DemonBuddy is closed
2: Go into the DemonBuddy folder, and DELETE the entire "CompiledAssemblies" folder from within the DB folder (this is completely fine and safe to do - DemonBuddy will rebuild this folder!).
3: Go into the /settings/ folder within DemonBuddy - in this folder, delete "GilesTrinity.cfg".
4: Load DB and configure the plugin again
Following these quick, simple instructions will fix a lot of random issues that can crop up between upgrades. The reason for these requirements is largely down to the size and complexity of Giles Trinity.
 
GilesSmith said:
v1.4.6.1 uploaded:
- Bot should now be able to use both Whirlwind, and Tempest Rush, to move towards avoidance safe-spots, if these abilities are available.
- Fix for whirlwind sometimes targeting wrong area.
- Whirlwind now has a slightly wider arc it can randomly WW within within the general direction of the target.
- Will now ignore health globes further than 35f away to help avoid stucks.
- Having a large "Pickup radius" should no longer make your bot never move for a health-globe already within that radius.
- Pestilence Hand priority increased.
- Default options now ignore all blue jewelry for pickups.
- Changes to priority of various objects mid-combat.


IMPORTANT: Updating Plugin Versions:
To minimize or fix problems (random slowdowns, oddities with avoidance settings ignoring certain avoidance types), you should do the following things every time you update Giles Trinity or if you get any problems after updating;
1: Make sure DemonBuddy is closed
2: Go into the DemonBuddy folder, and DELETE the entire "CompiledAssemblies" folder from within the DB folder (this is completely fine and safe to do - DemonBuddy will rebuild this folder!).
3: Go into the /settings/ folder within DemonBuddy - in this folder, delete "GilesTrinity.cfg".
4: Load DB and configure the plugin again
Following these quick, simple instructions will fix a lot of random issues that can crop up between upgrades. The reason for these requirements is largely down to the size and complexity of Giles Trinity.
Click to expand...


OOO another update, can I get you, or someone, to point me to where I would find the Fallen Prohpet and Grunt priority so I can try tweaking up the priority a bit for the prophets
 
Quick question out of Ban paranoia, is this plugin becoming to good? The work being done on this plugin is amazing, it is starting to flawlessly execute skill combinations. Wouldn't that make this easier to detect if it never errors, or always uses skills on the millisecond? I do not know one human player that flawlessly executes a skill combination, repeatedly in rapid succession down to the millisecond.

Just throwing the Q out there love the plugin just trying to error on side of caution :)
 
ivann187 said:
Its weird.. Mine is not picking up yellow items..
Click to expand...
Make sure you have your item pickup levels set in the config, and are using Giles filters *NOT* custom loot rules (if you are using custom loot rules, then you are on your own!). If you still have problems, check out post #2 of this thread here;
[url]http://www.thebuddyforum.com/demonbuddy-forum/plugins/67705-plugin-giles-trinity.html#post696466[/url]

And do actually go through it (don't just glance and say "Oh I don't need to do that, it's the plugin at fault" - actually read through it and follow the tips :D). you're the only one to post this problem, so it's definitely something at your end - whether it be a config issue, a reinstall needed, an upgrade failure, incompatible plugins, using protected bag slots, using custom loot rules or anything else - the common problems and solutions post covers them all. Let me know how you get on :)

mrcoldblood said:
my bot stop creative new game after afew run..any1 have same problem???
Click to expand...
Sounds more like a problem with your routines/profiles, your profile manager, or other plugins you are running. While you can follow the link I gave to the person above about common problems, in your case I would suggest also checking for incompatible plugins, check for an update to Rad's profile manager (assuming you use that) and any profiles you run, and then try asking for help from the profile manager/profile makers, or in the general support forums and post a log. I don't think this is anything to do with Trinity, though you could try disabling Trinity's in-built stuck handler (from the advanced tab) for now, just incase your game is getting stuck, but Trinity is failing to reload your profile properly when it gets completely stuck.

meef said:
Quick question out of Ban paranoia, is this plugin becoming to good? The work being done on this plugin is amazing, it is starting to flawlessly execute skill combinations. Wouldn't that make this easier to detect if it never errors, or always uses skills on the millisecond? I do not know one human player that flawlessly executes a skill combination, repeatedly in rapid succession down to the millisecond.
Just throwing the Q out there love the plugin just trying to error on side of caution :)
Click to expand...
Definitely not. It's just becoming closer and closer to a good human player, and further and further away from an automated bot that does stupid repeatable things. Compare DB without Trinity, to DB with Trinity, and you'll soon spot which looks more "Bottish" over an extended duration of time! :)
(btw: this is the first time I've seen somebody complain, or approach a complaint, that my plugin is becoming too good! While I take it as a compliment, I have to confess, this has to be the most ridiculous concern I've heard voiced, to date, on this thread. Sorry if that offends, but of all the concerns I've ever seen raised, this is by far the silliest! :D)
 
Last edited:
GilesSmith said:
Definitely not. It's just becoming closer and closer to a good human player, and further and further away from an automated bot that does stupid repeatable things. Compare DB without Trinity, to DB with Trinity, and you'll soon spot which looks more "Bottish" over an extended duration of time! :)
Click to expand...

Thanks for the quick reply, I really do enjoy your plugin! I am just noticing it is starting to become a better player then myself. So the question begins to form how good is "To" good. Would it be possible to request randomizing milli seconds? just for cautions sake? I don't know if that would be a burden or if it is difficult. I remember since the early days of d2 "When a Soj was worth 3 P skulls, and Ice blink was the bomb!" randomization was always very important.
 
Hey Giles,

Great job again!

I am having some issues with globins with v1.4.6 and up.

I was using 1.4.4 and it seemed to be targeting globins in the presence of trash. However, with the recent update to 1.4.6, if a trash mob walks up to you (like those melee crap that crawls from teh edges), it will shift the focus to the trash while the globin runs away. Then after that, it kills the rest of the trash around (while globin runs away).
 
babosasa said:
Do i just use "default loot rule" for the loot rule selection?
Click to expand...
You can use anything you like - they will not be loaded, and will be entirely ignored. You only need to worry about what loot-rules you load if you select "use custom loot rules" in the item handling tab, which is really for advanced users (or as I think of them, "fussy" users ;) ). All item-pickup decisions are selected in drop-down boxes within the item-handling tab, and the decisions on what to keep or trash are made by the plugin intelligently scoring each item.
 
The avoidance now works great, including the plague hands!

There is however an problem with looting, if i kill a mob, dring ww, and as the item is dropping, if the bot focuses on attacking another mob and keeps going further and further away, he will no longer back track and try to pickup the items. i saw an archon crown and flawless emerald wall to the ground just at the edge of the screen as he was engaging on another mob.
 
thank giles, btw, my char is not picking up health globe when its health is low , is that pick up health globe function included in your trinity plugin =) ?
 
thank giles, btw, my char is not picking up health globe when its health is low , is that pick up health globe function included in your trinity plugin =) ?
 
babosasa said:
thank giles, btw, my char is not picking up health globe when its health is low , is that pick up health globe function included in your trinity plugin =) ?
Click to expand...
It certainly does pick up health globes, but it depends on circumstances, whether health-globes are easily reachable (eg not behind monsters or AOE's), and if you have enabled health globes in the config, and what health-level % you have set health globes at. Be sure to go through the config pages of the plugin. Check the combat config, and the class-specific tab for your class in that config. You can set your globe pickup % there quite easily. Have an experiment and go through the rest of the config options - most of them work best at defaults, but tweak however you like :)

JoeC said:
The avoidance now works great, including the plague hands!
There is however an problem with looting, if i kill a mob, dring ww, and as the item is dropping, if the bot focuses on attacking another mob and keeps going further and further away, he will no longer back track and try to pickup the items. i saw an archon crown and flawless emerald wall to the ground just at the edge of the screen as he was engaging on another mob.
Click to expand...
You can try enabling backtracking. It's not perfect yet and needs some work, but it will try and force your bot to walk back along a path after fighting mobs to help ensure you don't miss a single item.

Personally - I find the slowdown from backtracking every single time worse than missing the occasional rare item (the times an item drops on the edge of the screen while your bot is dragged in the opposite direction, and no waypoints in your routine lead you back that way again for the rest of the run, are exceptionally rare compared to the total number of item drops - even playing as a human you could easily miss things off the edge of your screen if you didn't notice something dying/got distracted chasing a goblin and were trying to do quick runs! But backtracking will get some updates at some-point for those that can't bare the thought of one single item being missed at any point. As it stands, Trinity will already net you more items than any other setup, and a whole lot faster! :D).
 
I dont know what I did. I just tried to run a gain the program and it worked fine.

Another question. How can my wizard attack close to the monster? Its sometimes attacking too far that the Explosion Blast wont hit.
My CM is on.

Thanks Giles, More power D:
 
Last edited:
GilesSmith said:
It certainly does pick up health globes, but it depends on circumstances, whether health-globes are easily reachable (eg not behind monsters or AOE's), and if you have enabled health globes in the config, and what health-level % you have set health globes at. Be sure to go through the config pages of the plugin. Check the combat config, and the class-specific tab for your class in that config. You can set your globe pickup % there quite easily. Have an experiment and go through the rest of the config options - most of them work best at defaults, but tweak however you like :)


You can try enabling backtracking. It's not perfect yet and needs some work, but it will try and force your bot to walk back along a path after fighting mobs to help ensure you don't miss a single item.

Personally - I find the slowdown from backtracking every single time worse than missing the occasional rare item (the times an item drops on the edge of the screen while your bot is dragged in the opposite direction, and no waypoints in your routine lead you back that way again for the rest of the run, are exceptionally rare compared to the total number of item drops - even playing as a human you could easily miss things off the edge of your screen if you didn't notice something dying/got distracted chasing a goblin and were trying to do quick runs! But backtracking will get some updates at some-point for those that can't bare the thought of one single item being missed at any point. As it stands, Trinity will already net you more items than any other setup, and a whole lot faster! :D).
Click to expand...

wow i should really proof read my posts before sending it, so many grammatical and spelling errors lol.

As it stands i am more than content with Trinity, i was just bring any issues i find to your attention.
 
thanks for the updates!
i still seem to have issues with the bot fighting the grunts instead of chasing and killing the shamans. anyone have similar issues?
 
Hey Giles, Since my computer can handle it fine, should i just manually change TPS to 15 always??

Hey side effects or benefits from that?

cheers
 
not sure if its just me , but when u use Giles old stuff like the stash replacer and what not over trinity i always find more stuff not sure if the filter is higher on trinity or if trinity is just not picking up and missing gear on the ground.
 
HappyHour said:
not sure if its just me , but when u use Giles old stuff like the stash replacer and what not over trinity i always find more stuff not sure if the filter is higher on trinity or if trinity is just not picking up and missing gear on the ground.
Click to expand...

The item scores for stashing in trinity have been updated to keep inline with the AH market as items get cheaper and more common.

You don't really want a stash full of unsellable junk now do ya? If ya do, set all the scoring to 0, and it will make the plugin find lots of loot for you! :)
 
Status
Not open for further replies.
Back
Top