What's new
By:
  • Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • Visit Resources
  • Visit Downloads
  • Visit Portal

[Plugin] GearSwap Reloaded

Fujiyama said:
Anyone using Rechel's Ring of Larceny? I can't seem to make it work with OOC. Maybe running with "Combat Disabled" will do the trick, but I don't really want to disable combat. I would perhaps want it to keep the ring on as long as I am not attacking/targeting any monsters. Anyone able to help?
Click to expand...

What's your setup atm?

austin909 said:
When I woke up, I found the bot to forget swap default gear for 3 hours(Through the GSR Log).
So, the damage is very very low........Complete a A1 Zerg bounty took 30+ minutes......
Condition:CombatDisabled
Default:BOW+Quiver
TO:Danetta's Set
And the log file:View attachment 144610

Another problem:TPS drop too much(often 2-3).Old version is OK.
Click to expand...

Wanna hear something funny? your issues don't come from GSR... The end of the log file says enough about your error... something is really wrong with your setup.

And if it doesn't swap CombatDisabled gear back, it's probably related to the profile... are you running the zerg version? I was considering removing the part where it checks for the file name.
 
toNyx said:
Wanna hear something funny? your issues don't come from GSR... The end of the log file says enough about your error... something is really wrong with your setup.
Click to expand...
The TPS problem?

toNyx said:
And if it doesn't swap CombatDisabled gear back, it's probably related to the profile... are you running the zerg version? I was considering removing the part where it checks for the file name.
Click to expand...

I use the ZERG A1 bounty profile from here:
https://www.thebuddyforum.com/demon...dventure-mode-bounties-community-edition.html

And Why is OK before I go to bed.
 
Last edited:
I found that if I retain only the necessary gear in gearlist, the TPS problem will improved a lot.
Example:
I just want to swap the BOW+Quiver --> Danetta's Set.
So, I set the Danetta's Set for "CombatDisabled" and BOW+Quiver for "Default" only.
And delete all other default parts(helm, ring, shoulder etc.....) from gearlist.

Now, TPS is about 5-7.Old version no similar problems.
 
austin909 said:
I found that if I retain only the necessary gear in gearlist, the TPS problem will improved a lot.
Example:
I just want to swap the BOW+Quiver --> Danetta's Set.
So, I set the Danetta's Set for "CombatDisabled" and BOW+Quiver for "Default" only.
And delete all other default parts(helm, ring, shoulder etc.....) from gearlist.

Now, TPS is about 5-7.Old version no similar problems.
Click to expand...

Your computer have serious memory issues ;)

sibs said:
Not swapping back, keybot is not enabled :(

Using this profile: https://www.thebuddyforum.com/demon...es/167274-keyhunter-a1-a4-keywarden-hunt.html zerg mode.
Click to expand...

Well, which gear/condition? so I can figure out what or where to look? ;) thanks anyway
 
toNyx, your plugin is fantastic. Congratulations :)

I have a request to make. Can you add a behavior for Akarat's Champion? Just before using it, equip some items (with cooldown reduction). Then use the skill, and revert back to the "Default" item assigned.

Thanks!
 
toNyx said:
Well, which gear/condition? so I can figure out what or where to look? ;) thanks anyway
Click to expand...

Combat Disabled condition, it just never detects combat was turned on, might be the toggle the profile is using is different than the toggle you're checking for? Just a hunch, and ty!
 
bombastic said:
toNyx, your plugin is fantastic. Congratulations :)

I have a request to make. Can you add a behavior for Akarat's Champion? Just before using it, equip some items (with cooldown reduction). Then use the skill, and revert back to the "Default" item assigned.

Thanks!
Click to expand...

You can add it yourself ;) just edit your Priorities.xml file, and add the SNO (string, like DemonHunter_Vault you know ;)) anywhere you want :)

Be careful ! it could slow your combat behavior or lower your TPS, since 2 plugins will have to communicate (and don't forget the CombatBase.cs file)

sibs said:
Combat Disabled condition, it just never detects combat was turned on, might be the toggle the profile is using is different than the toggle you're checking for? Just a hunch, and ty!
Click to expand...

I suspect the zerg profile check to be the cause I might push a BETA to see if it's still happening.
 
The plugin has been increasingly perfect.
And It is time to have a cup of sweet beer.
(Donated,please check!:))
 
toNyx said:
You can add it yourself ;) just edit your Priorities.xml file, and add the SNO (string, like DemonHunter_Vault you know ;)) anywhere you want :)

Be careful ! it could slow your combat behavior or lower your TPS, since 2 plugins will have to communicate (and don't forget the CombatBase.cs file)
Click to expand...

I did this, and didn't work. (by Priorities.xml i'm assuming you mean Priorities.cs)

I think there's something else i need to change (or add), like a check in Checks.cs, right?
 
bombastic said:
I did this, and didn't work. (by Priorities.xml i'm assuming you mean Priorities.cs)

I think there's something else i need to change (or add), like a check in Checks.cs, right?
Click to expand...

Nope, in your XML file ;) located in Settings/GearSwapReloaded iirc :) you just have to add the SNO as string in it and it'll work.

It works with vault, steed charge and spirit walk already, so I guess adding anything should work.
 
Last edited:
Bot become super DUMB with this plugin. 2-5 sec inactivity before any action ...

Without it: ~10 TPS(defaul settings for trinity)
With it: 0 - 1 TPS

And also with this plugin:

Stopping the bot.
Session lasted for: 00:30:36.6124649
Chose Trinity as your combat routine
[Trinity] Inserting GoldInactivity into TreeStart
[Trinity] Inserting XPInactivity into TreeStart
[ChangeMonitor] worldId changed from 288454 to 288685 - X1_LR_Level_02
[ChangeMonitor] levelAreaId changed from 276212 to -1 - [sno none]
Bot Thread Ended. Was this requested?

This happening when location is changed.
 
Last edited:
Bulleye1234 said:
Bot become super DUMB with this plugin. 2-5 sec inactivity before any action ...

Without it: ~10 TPS(defaul settings for trinity)
With it: 0 - 1 TPS

And also with this plugin:

Stopping the bot.
Session lasted for: 00:30:36.6124649
Chose Trinity as your combat routine
[Trinity] Inserting GoldInactivity into TreeStart
[Trinity] Inserting XPInactivity into TreeStart
[ChangeMonitor] worldId changed from 288454 to 288685 - X1_LR_Level_02
[ChangeMonitor] levelAreaId changed from 276212 to -1 - [sno none]
Bot Thread Ended. Was this requested?

This happening when location is changed.
Click to expand...

I'll start to ignore people that can't make a proper bug/issue report.

What's your GSR config? what are you going to swap?

GSR can't stop the bot itself, it's an issue on your side.
 
toNyx said:
I'll start to ignore
Click to expand...
I'll do the same then: I'll ignore plugin developer who don't want fix his unoptimized code. i solved my problem already by deleting ur plugin and adding my own code to trinity. THX for reply anyway.
 
toNyx said:
I suspect the zerg profile check to be the cause I might push a BETA to see if it's still happening.
Click to expand...

With this Profile (https://www.thebuddyforum.com/demon...e-mode/169804-zerg-key-farm-fast-version.html) it swaps back and forth I noticed it has the GSRZerg tag on it, however it doesn't always swap back correctly, this is how I have it set up:

CombatDisabled - Danetta's Spite
CombatDisabled - Danetta's Revenge
CombatDisabled - Illusory Boots
Arcane - Countess Julia's Cameo (works 100% everytime all the time :D )
Default - Bombadier's Rucksack
Default - ....
Default - Kridershot

Here's a GearSwapLog

[01/10/2014 17:41:36.780] Equipping Kridershot - Condition: CombatDisabled - Reason : Restoring initial Item configuration
[01/10/2014 17:41:36.781] Equipping Marauder's Spines - Condition: CombatDisabled - Reason : Restoring initial Item configuration (??? Spines O_o it's Treads)
[01/10/2014 17:41:43.111] Attempt to equip Danetta's Set - Condition: CombatDisabled
Found warden!

[01/10/2014 17:43:27.583] Equipping Bombadier's Rucksack - Condition: Default - Reason : Marked as Default Gear
[01/10/2014 17:43:27.614] Equipping Marauder's Treads - Condition: Default - Reason : Marked as Default Gear
[01/10/2014 17:43:27.630] Equipping Kridershot - Condition: Default - Reason : Marked as Default Gear
Success!

[01/10/2014 17:44:50.841] Attempt to equip Danetta's Set - Condition: CombatDisabled
[01/10/2014 17:44:53.864] Attempt to equip Danetta's Set - Condition: CombatDisabled
[01/10/2014 17:44:57.344] Attempt to equip Danetta's Set - Condition: CombatDisabled
[01/10/2014 17:45:00.613] Attempt to equip Danetta's Set - Condition: CombatDisabled
[01/10/2014 17:45:04.222] Attempt to equip Danetta's Set - Condition: CombatDisabled
[01/10/2014 17:45:07.438] Attempt to equip Danetta's Set - Condition: CombatDisabled
Only equips one of the weapons(spite) keeps spamming this, and pretty much breaks it :(

It's so good when it works :)
 
Works well with the Rift Compilation A4 Zerg, seems to be some issue between profiles and GSR.
 
Attempt to equip Danetta's Set - Condition: DemonHunter_Vault

It doesn't seem to switch back to my default no matter what condition I try. Is there another setting I need to put danetta's set under? I tried Out of Combat, but it wouldn't switch the set at all. Anyone have a setting to make it where my danetta's set will equip so I can vault but when I get in combat it switches back to default?
 
You must log in or register to reply here.
Back
Top