What's new
By:
  • Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • Visit Resources
  • Visit Downloads
  • Visit Portal

[Plugin] AutoFollow 1.260.1

Remember: This is not local. I'm trying to get it to work over the internet.

The Follower bot just got this message again:
[AutoFollow.Behaviors][<OutOfGameTask>d__2] Waiting for bots to connect...
[AutoFollow.Coroutines][<RequestPartyInvite>d__1f] Requesting party invite!

So the bot must be able to communicate to the server or else it wouldn't know it could request an invite, correct?

So the server bot says:
IsConnected:True
Connection Mode:Server
Connected Bots:0
Behavior Type:Lead

The follower bot says:
IsConnected:True
Connection Mode:Client
Connected Bots:1
Behavior Type:Follow

It makes no sense that one of the demonbuddy instances says 1 and the other says 0. I'm confused.

I have manually invited the Follower and in the follower demonbuddy accepted the invite and in the log it says:
[AutoFollow.Coroutines][<AcceptPartyInvite>d__21] Accepting Party Invite

Now we are in the party/selection screen, again nothing happens. The Leader bot still says:
[AutoFollow.Behaviors][<OutOfGameTask>d__2] Waiting for bots to connect...

And in the autofollow tab Connected Bots:0.

I have manually started the game (leader) which has rift profile loaded and it started doing rifts. The weird thing is, the follower bot is actually following the leader however the leader demonbuddy log still only says
[AutoFollow.Behaviors][<OutOfGameTask>d__2] Waiting for bots to connect...


We have recently learned the follower bot will still say
[AutoFollow.Coroutines][<RequestPartyInvite>d__1f] Requesting party invite!

Even though the Leader bot isn't running.


I'm trying to give you as much info as I can.
 
Last edited:
To those having problems running this plugin with YAR, make sure to disable "profile kickstart" in the settings. Then check YAR log file, if it still is loading the YAR_kickstart.xml profile here is what you need to do:
1. Locate the YAR_kickstart.xml file and open it
2. Open the profile u are using (example: NephalemRift.xml) and copy the contents
3. Paste the contents into YAR_kickstart.xml and save it
4. Right-click on the YAR_kickstart.xml file and make it read only
5. Enjoy :D

There is a bug currently in YAR it always creates a kickstart file not matter what you choose in the settings
 
Last edited:
This is honestly great. I was having issues with simple follower where my "followers" would just non stop zone over and over and over again until I manually started a rift or something. This is great. Cheers
 
I took a nap for a few hours and hopped back on and saw all my games were at the title screen. Not sure what happened though. The logs were huge cause it just kept spitting an error out for a while I guess. Gonna use it again and see
 
fadi said:
To those having problems running this plugin with YAR, make sure to disable "profile kickstart" in the settings. Then check YAR log file, if it still is loading the YAR_kickstart.xml profile here is what you need to do:
1. Locate the YAR_kickstart.xml file and open it
2. Open the profile u are using (example: NephalemRift.xml) and copy the contents
3. Paste the contents into YAR_kickstart.xml and save it
4. Right-click on the YAR_kickstart.xml file and make it read only
5. Enjoy :D

There is a bug currently in YAR it always creates a kickstart file not matter what you choose in the settings
Click to expand...

Your idea is very good!~ :)
 
boater said:
Remember: This is not local. I'm trying to get it to work over the internet.

The Follower bot just got this message again:
[AutoFollow.Behaviors][<OutOfGameTask>d__2] Waiting for bots to connect...
[AutoFollow.Coroutines][<RequestPartyInvite>d__1f] Requesting party invite!

So the bot must be able to communicate to the server or else it wouldn't know it could request an invite, correct?

So the server bot says:
IsConnected:True
Connection Mode:Server
Connected Bots:0
Behavior Type:Lead

The follower bot says:
IsConnected:True
Connection Mode:Client
Connected Bots:1
Behavior Type:Follow

It makes no sense that one of the demonbuddy instances says 1 and the other says 0. I'm confused.

I have manually invited the Follower and in the follower demonbuddy accepted the invite and in the log it says:
[AutoFollow.Coroutines][<AcceptPartyInvite>d__21] Accepting Party Invite

Now we are in the party/selection screen, again nothing happens. The Leader bot still says:
[AutoFollow.Behaviors][<OutOfGameTask>d__2] Waiting for bots to connect...

And in the autofollow tab Connected Bots:0.

I have manually started the game (leader) which has rift profile loaded and it started doing rifts. The weird thing is, the follower bot is actually following the leader however the leader demonbuddy log still only says
[AutoFollow.Behaviors][<OutOfGameTask>d__2] Waiting for bots to connect...


We have recently learned the follower bot will still say
[AutoFollow.Coroutines][<RequestPartyInvite>d__1f] Requesting party invite!

Even though the Leader bot isn't running.


I'm trying to give you as much info as I can.
Click to expand...

I have the exact same problem, if i'm trying to be the leader. I even have my computer set as the DMZ so shouldnt be a port issue. But if i run at the follower to my buddies computer it works just fine as that, really have no idea whats up with it too.
 
I have also noticed that if your followers have the same names, only one will get invited.. it would be really nice if you could fix this and thank you!
 
another bug, when using autofollow characters dont use ice armour and magic weapon
uses it..if uyou manually turn it on. you can see the bot spamming it
it uses it in the beginning of a fight, but if it dies it doesnt rebuff itself
 
Last edited:
For the love of god.. Been spending last 12 hours trying to get this thing to work but no no...

[AutoFollow.Networking][Server] Initializing Server Service @ http://localhost:10920/ Attempt=1
[AutoFollow.Behaviors][<OutOfGameTask>d__2] Waiting for bots to connect...
Click to expand...

Nothing happends other than this, it just stays that way.

Bind Adress: localhost
Server Port: 10920

I turned off windows firewall entirely, but even so, i did change the rules to allow port forward on 10920, both on udp and tcp to be 100% sure.
I also went into the routers firewall and did a port forward on this, also here both tcp and udp to be 100% sure.

It still won't connect.. I have no idea wtf i'm doing so wrong?!

The only thing i could think about would be that the WIFI screws up my second computer, but even so, it's still the same network they connect too and share the same IP etc...

Also tried instead of localhost the IP on both computers, localhost on leader and IP on follower and the very same result..

[AutoFollow.Networking][Server] Initializing Server Service @ http://localhost:10920/ Attempt=1
[AutoFollow.Behaviors][<OutOfGameTask>d__2] Waiting for bots to connect...
Click to expand...

Edit: I got it working when using it on the very same computer, but not when using two different computers but same network.. Also the leader keeps vaulting(demonhunter) around and casting my resource skill + rushing straight into shrines - With the leadermanual loaded :-/

Edit #2: Finally got it working on two computers, but the problem with the bot using skills remain... I only have autofollow activated as plugin and using the leadermanual profile, yet the character keeps spamming vault(which is insanely deadly in hardcore at certain times!)
It's as if it is 50/50 manual/auto... :-/ Impossible to play :(

Any ideas as to edit #2 issue?
 
Last edited:
Cyphoner said:
For the love of god.. Been spending last 12 hours trying to get this thing to work but no no...



Nothing happends other than this, it just stays that way.

Bind Adress: localhost
Server Port: 10920

I turned off windows firewall entirely, but even so, i did change the rules to allow port forward on 10920, both on udp and tcp to be 100% sure.
I also went into the routers firewall and did a port forward on this, also here both tcp and udp to be 100% sure.

It still won't connect.. I have no idea wtf i'm doing so wrong?!

The only thing i could think about would be that the WIFI screws up my second computer, but even so, it's still the same network they connect too and share the same IP etc...

Also tried instead of localhost the IP on both computers, localhost on leader and IP on follower and the very same result..



Edit: I got it working when using it on the very same computer, but not when using two different computers but same network.. Also the leader keeps vaulting(demonhunter) around and casting my resource skill + rushing straight into shrines - With the leadermanual loaded :-/

Edit #2: Finally got it working on two computers, but the problem with the bot using skills remain... I only have autofollow activated as plugin and using the leadermanual profile, yet the character keeps spamming vault(which is insanely deadly in hardcore at certain times!)
It's as if it is 50/50 manual/auto... :-/ Impossible to play :(

Any ideas as to edit #2 issue?
Click to expand...

localhost means the same machine.

on the following bot, you want to put the ip address of the leader computer.

on the lead computer goto command prompt and type in: "ipconfig"

it will show you a bunch of things. you want ipv4 address numbers. eg. mine is 192.168.1.3
 
A detailed description is necessary.
I did not understand exactly .....
Currently I use the Google translator.
 
Last edited:
...can somebody explain to me how to get the leadermanual profile working?
I use combat assist on my main, and my bot uses the autofollow leadermanual profile with autofollower checked
but it doesnt work
 
So guys, is this working properly right now? Could we run 4x LoN Bombardment in same group doing GR70+ speeds? would it be working over-night? or do u have to babysit ?
 
MooseFlapps said:
...can somebody explain to me how to get the leadermanual profile working?
I use combat assist on my main, and my bot uses the autofollow leadermanual profile with autofollower checked
but it doesnt work
Click to expand...
No, your bot uses Follower combat, that will never change. If you want to play manually, you load leader with Leader manual profile and plays. I dont know if combat assist work, since Leader manual is integrated with autofollow based on my guess
 
MathewDK said:
So guys, is this working properly right now? Could we run 4x LoN Bombardment in same group doing GR70+ speeds? would it be working over-night? or do u have to babysit ?
Click to expand...
it is working better with GR, for T10 i use simple follower instead. Why do you runw ith 4x LoN sader? they give no group support
 
lawlumad88 said:
it is working better with GR, for T10 i use simple follower instead. Why do you runw ith 4x LoN sader? they give no group support
Click to expand...

For group XP and crusader loot. But I guess, I could change one of them to Sup barb if necessary. But my question is, how often do the group get stuck? do you have to babysit? yes or no? can it run 8+ hours over-night with no problems? or how is it atm ?
 
MathewDK said:
For group XP and crusader loot. But I guess, I could change one of them to Sup barb if necessary. But my question is, how often do the group get stuck? do you have to babysit? yes or no? can it run 8+ hours over-night with no problems? or how is it atm ?
Click to expand...
i have had time when i ran 8 hrs straight and it was smooth. Followers restarted once or twice and sometime 1 of them would get stuck behind and not accepting rifts. It would say it will run stable for at least 4 hours at this version, still need some improvement. Keep in mind that followers wont use skills while they are following ( except for barb) or maybe it is just me. It is integrated with adventure so it is easier to control gem upgrading and you dont have to set 1% like simplefollower.
These things take trials, you should try multiple settings and see what works best for you
 
lawlumad88 said:
i have had time when i ran 8 hrs straight and it was smooth. Followers restarted once or twice and sometime 1 of them would get stuck behind and not accepting rifts. It would say it will run stable for at least 4 hours at this version, still need some improvement. Keep in mind that followers wont use skills while they are following ( except for barb) or maybe it is just me. It is integrated with adventure so it is easier to control gem upgrading and you dont have to set 1% like simplefollower.
These things take trials, you should try multiple settings and see what works best for you
Click to expand...

so whats the point of this? to have 3 supports running with you in grifts? do they drop loot or ?
 
-To push for higher rift
- Gain additional xp for each additional party member
- More loots
It is not simple to keep 4 men running together with optimizing setting and xp, it takes time. You can run them separately if it gives you better output.
 
You must log in or register to reply here.
Back
Top