What's new
  • Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • Visit Resources
  • Visit Downloads
  • Visit Portal

Phelon's Playground - Support Thread

Status
Not open for further replies.
@Phelon
Seems you are doing an amazing job here (even though i havent tested it yet because i dont play any of the supported classes :P) Keep it up and thanks for your efforts :D
And if you someday release support for any non zDPS WD build ill be even happier xD
 
@Phelon
Seems you are doing an amazing job here (even though i havent tested it yet because i dont play any of the supported classes :P) Keep it up and thanks for your efforts :D
And if you someday release support for any non zDPS WD build ill be even happier xD

I don't even know what the popular buil dis for WD =( I usually only play meta.
 
I've found my non-augmented archon wiz is running much better than my augmented twister wiz in my 4 man setup.

Any way we can set archon to cast immediately off cool-down from the second archon until the end of the rift? Using phelon's or not, the bot will try to stack 20 chantodos each and every time it goes into archon. This crushes your dmg output and makes you more likely to die and lose pools. Stacking to 20 when you don't have many swami stacks makes sense, but once you have swami stacks you want them to overlap by not bothering with the chantodos stacks inbetween archon casts.

If anyone has any tips let me know.
 
Last edited:
I am currently using

Monk
WD
Barb
Wiz (archon firebird/chantodo build)

Do this support the firebird chantodo build? I feel like its not well configured with the standard trinity just wondering if you have looked at it at all? Im running 80s with this at the moment on about 160/180b an hour no pools
 
I've found my non-augmented archon wiz is running much better than my augmented twister wiz in my 4 man setup.

Any way we can set archon to cast immediately off cool-down from the second archon until the end of the rift? Using phelon's or not, the bot will try to stack 20 chantodos each and every time it goes into archon. This crushes your dmg output and makes you more likely to die and lose pools. Stacking to 20 when you don't have many swami stacks makes sense, but once you have swami stacks you want them to overlap by not bothering with the chantodos stacks inbetween archon casts.

If anyone has any tips let me know.

With 60% CDR I get 20 stacks way before I ever hit Archon refreshing. You can remove the stack code from Wizard.Archon.


I am currently using

Monk
WD
Barb
Wiz (archon firebird/chantodo build)

Do this support the firebird chantodo build? I feel like its not well configured with the standard trinity just wondering if you have looked at it at all? Im running 80s with this at the moment on about 160/180b an hour no pools

I ran Firebird Archon and now using Tal Rasha Archon. What is your time left doing 80s? I can do 80's in about 6-8min avg
 
averaging 10 min a run

guess I should give tal archon a go I have all the gear I think
 
Good looking out Phelon.

I have attack speed dmg % and cdr on my chantodo weapon so I hit archon a bit sooner than most from obsidian procs.

Is this tal archon botting better than the firebird archon? All of your dmg comes from that cold coe rotation and im not sure how good the bot will be on timing it just right. Is it worth it to switch? Id have to re-augment some of my tals for the setup but if its worth it ill do it.

Could possibly drop the zmonk for a zsader since your survive is much higher with tals than firebirds, plus the dmg bonuses are higher and most of the time the wiz is jumping around and not really standing in sanc anyway.

EDIT: http://www.diablofans.com/builds/79842-103-tal-rashas-archon

seems like you could get away with dropping the halo in 4 man bot setups. maybe run obsidian and change the 8 cdr on neck to cold %.
 
Last edited:
just tried out the tal archon in my 4 man setup on seasons.

ran an 80 with 7:30 left on the clock. keep depths into westmarch so it wasn't a great rift by any means.

Bot does not recognize the black hole skill or electrocute. I swapped electrocute to static discharge.

Biggest problem is CoE timing. You can set the bot to time all skills to their respective CoE rotation, but it won't spam explosive blast if you do so.

Need to find a way to have it just hit archon on CoE just like the sader hit bombarb before physical.

EDIT: It's hard for me to say which is better: tals or firebirds archon for botting. I have 4 100 augments on the tals parts and zero on the firebirds stuff.

EDIT #2: bot does not use archon slow time ability while in archon mode

EDIT #3: yeah. with phelon's off and regular trinity in just did a 5 minute 80. shit is broken lol
 
Last edited:
just tried out the tal archon in my 4 man setup on seasons.

ran an 80 with 7:30 left on the clock. keep depths into westmarch so it wasn't a great rift by any means.

Bot does not recognize the black hole skill or electrocute. I swapped electrocute to static discharge.

Biggest problem is CoE timing. You can set the bot to time all skills to their respective CoE rotation, but it won't spam explosive blast if you do so.

Need to find a way to have it just hit archon on CoE just like the sader hit bombarb before physical.

EDIT: It's hard for me to say which is better: tals or firebirds archon for botting. I have 4 100 augments on the tals parts and zero on the firebirds stuff.

EDIT #2: bot does not use archon slow time ability while in archon mode

EDIT #3: yeah. with phelon's off and regular trinity in just did a 5 minute 80. shit is broken lol

Mind linking the a d3 planner to the build?
 
anyone elses trinity practically break over night?

wiz isnt using static discharge. its just walking around aimlessly. Spamming buffs that it just needs to have up once.

Wasn't doing this yesterday
 
I am not running CoE at all. I am using Unity to keep my Wiz alive. We were having death issues prior to using Unity when we were getting close to GR 90. I can add a CoE Check for Cold to go into Archon, although that could seriously effect DPS if we have to wait more than 1 element worth.
 
I am not running CoE at all. I am using Unity to keep my Wiz alive. We were having death issues prior to using Unity when we were getting close to GR 90. I can add a CoE Check for Cold to go into Archon, although that could seriously effect DPS if we have to wait more than 1 element worth.

Hm, interesting! overall dmg output is a bit lower but keeps bot alive longer?
 
Hm, interesting! overall dmg output is a bit lower but keeps bot alive longer?

Staying alive > Net Bonus of CoE. Plus when you die you lose stacks. I tweaked the Monk to give up dmg reduc for more damage output. I am about 3.4M dps in town on my wizard. I boost to close to 6M dps in packs. So I have the DPS, I just needed to be able to survive. I am at about 2 deaths per hour doing 85's.

I also put specs and trinity settings in first post and I added CoE code for those who want to use it. It will delay for Archon max of 3 seconds to get into CoE Cold.
 
Last edited:
Hey Phelon did the zdps Barb uses his ancient spear perfect? because i had to code the barber.cs

I have exactly to use your gear and spec on each of my four chars? cause right now i´m using twisted sword and not archon.

doing 82-83 full augments (90´s int or vit) on every char. not tested your beta playground yet.
 
Hey Phelon did the zdps Barb uses his ancient spear perfect? because i had to code the barber.cs

I have exactly to use your gear and spec on each of my four chars? cause right now i´m using twisted sword and not archon.

doing 82-83 full augments (90´s int or vit) on every char. not tested your beta playground yet.

Twisted Sword Archon won't work, Twisted Sword with only Tal Rasha's will work. Ancient Spear works wonderfully. I suggest using the same skills as me as it may not work if you do not. I am currently doing 85's with no augments (Cause I am bad).
 
Status
Not open for further replies.
Back
Top