What's new
By:
  • Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • Visit Resources
  • Visit Downloads
  • Visit Portal
RebornBuddy Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

[PB][N] 1-600 Fishing (Dalaran)

noler said:
I have the same problem as many other have posted here. The bot keeps on going to 575 then stops and try to vendor things, even though bags are empty. If I restart the bot, it just continue to try vendor things. Whats wrong? How can I make it keep on going to 600?
Click to expand...

When you hit 575 this profile starts running from the hotspot to train/vendor to the hotspot for fishing.

A Quick fix I found is.

Go into honorbuddy set it too Profession Buddy then go into ?bot config? profession buddy profile fishing 1-600(dalaran).xml
In this go to the line/tab (subroutine) ?Sub VenderAndTrain? Delete that whole thing.
Then save it as fishing 1-600(dalaran)2.xml
Open this new profile fishing 1-600(dalaran)2.xml and use it for these last 25 lvls
This should fix that problem.

Now the bot will not vendor items so you should make sure your bags are free for this.

You will probably get a err message ?unable to find subroutine with name ?VenderAndTrain? Hope this helps.
 
Last edited:
hey i just wanted to know something before i start using this
does this profile seem "fishy"? heheh anyone get it?? fishy??? hehe???... heh... he..
jokes aside, i hear the ban rate is higher for people using autoangler than any other profile or bot, so is there a high chance of getting banned by using this or??
thx
 
still has the problem where it wont deselect the trainer. other then that its working as described tyvm
 
When i start this profile with honorbuddy, no plugins running. it works fine untill i get something to catch, the problem is that it does not catch the things it just waits 20 seconds then sling the rod again
 
lordelias said:
When i start this profile with honorbuddy, no plugins running. it works fine untill i get something to catch, the problem is that it does not catch the things it just waits 20 seconds then sling the rod again
Click to expand...

Provide a log if you expect help.
 
cuzzer said:
When you hit 575 this profile starts running from the hotspot to train/vendor to the hotspot for fishing.

A Quick fix I found is.

Go into honorbuddy set it too Profession Buddy then go into ?bot config? profession buddy profile fishing 1-600(dalaran).xml
In this go to the line/tab (subroutine) ?Sub VenderAndTrain? Delete that whole thing.
Then save it as fishing 1-600(dalaran)2.xml
Open this new profile fishing 1-600(dalaran)2.xml and use it for these last 25 lvls
This should fix that problem.

Now the bot will not vendor items so you should make sure your bags are free for this.

You will probably get a err message ?unable to find subroutine with name ?VenderAndTrain? Hope this helps.
Click to expand...


Thanks for your help it worked like a charm but I had to delete the HB cache in order to make it work :) Thanks again!
 
It seems like the profile has a few bugs. I'll fix them when I get home, I'm on vacation atm.

EDIT: I have no made a few small edits to the profile. It should work now again. Please test it guys.
 
I would suggest for anyone reading this to NOT use this until OP has fixed the script.

What happens is, the bot will fish to lvl 575; then proceed to run and go train but gets stuck and go back to the spot they were...then proceed to go and train and get stuck again! DO NOT USE THIS SHIT UNLESS YOU WANNA GET REPORTED!!!

I left my bot on overnight and thought I was gonna be 600 in the morning...

I awoke to my bot jumping back and forth like an idiot. WHO KNOWS HOW LONG I'VE BEEN THERE? This profile should be removed.
 
can confirm the problem posted as above. luckily I was watching and it only does this 2-3 times then I ditched the profile :D
 
Yeah well, looked into the Profile and found the paragraph:

<If Condition="(Fishing.MaxLevel - Fishing.Level &lt;= 25 &amp;&amp; Fishing.MaxLevel != 525) || Me.BagsFull" IgnoreCanRun="True">
<CallSubRoutine SubRoutineName="VenderAndTrain" />
</If>

I think this is just because that line wasn't updated since the cataclysm profile, so you simply have to change the "&amp;&amp; Fishing.MaxLevel != 525" into "&amp;&amp; Fishing.MaxLevel != 600", because otherwise it will get stuck when you reah 575, cause you meet the conditions, but can't learn any more levels.
 
I can confirm there is an issue where the bot wants to run back and forth training, I made the adjustment to max as 600 but still the bot refuses to fish and just runs back and forth vendoring and training. Mine however only started doing this at 575 skill.
Starting the bot!

Currently Using BotBase : ProfessionBuddy
Changing current profile to level 0 - 2147483647
Fishing1-600: by Lbniese
Fishing1-600: Leveling Fishing to 600
Fishing1-600: Training and Vendoring
PB 1.607: Done training
PB 1.607: SellItemAction Completed for 0
PB 1.607: SellItemAction Completed for 43646
Fishing1-600: Moving to fishing spot
PB 1.607: MoveTo Action completed for type Location
Fishing1-600: Facing towards water
[Singular] Casting Deadly Poison on Me @ 100.0%
Fishing1-600: Training and Vendoring
PB 1.607: Done training
PB 1.607: SellItemAction Completed for 0
PB 1.607: SellItemAction Completed for 43646
Fishing1-600: Moving to fishing spot
PB 1.607: MoveTo Action completed for type Location
Fishing1-600: Facing towards water
[Singular] Casting Deadly Poison on Me @ 100.0%
Fishing1-600: Training and Vendoring
PB 1.607: Done training

Edit:when I added a buff to my fishing rod to give me +100 the bot started working, A reboot could have helped as well.
 
Retry said:
I would suggest for anyone reading this to NOT use this until OP has fixed the script.

What happens is, the bot will fish to lvl 575; then proceed to run and go train but gets stuck and go back to the spot they were...then proceed to go and train and get stuck again! DO NOT USE THIS SHIT UNLESS YOU WANNA GET REPORTED!!!

I left my bot on overnight and thought I was gonna be 600 in the morning...

I awoke to my bot jumping back and forth like an idiot. WHO KNOWS HOW LONG I'VE BEEN THERE? This profile should be removed.
Click to expand...
Jaladhjin said:
I'll just leave this right here..
Click to expand...
Insta said:
can confirm the problem posted as above. luckily I was watching and it only does this 2-3 times then I ditched the profile :D
Click to expand...
NineTails said:
Yeah well, looked into the Profile and found the paragraph:

<If Condition="(Fishing.MaxLevel - Fishing.Level <= 25 && Fishing.MaxLevel != 525) || Me.BagsFull" IgnoreCanRun="True">
<CallSubRoutine SubRoutineName="VenderAndTrain" />
</If>

I think this is just because that line wasn't updated since the cataclysm profile, so you simply have to change the "&& Fishing.MaxLevel != 525" into "&& Fishing.MaxLevel != 600", because otherwise it will get stuck when you reah 575, cause you meet the conditions, but can't learn any more levels.
Click to expand...
Kate said:
I can confirm there is an issue where the bot wants to run back and forth training, I made the adjustment to max as 600 but still the bot refuses to fish and just runs back and forth vendoring and training. Mine however only started doing this at 575 skill.
Starting the bot!

Currently Using BotBase : ProfessionBuddy
Changing current profile to level 0 - 2147483647
Fishing1-600: by Lbniese
Fishing1-600: Leveling Fishing to 600
Fishing1-600: Training and Vendoring
PB 1.607: Done training
PB 1.607: SellItemAction Completed for 0
PB 1.607: SellItemAction Completed for 43646
Fishing1-600: Moving to fishing spot
PB 1.607: MoveTo Action completed for type Location
Fishing1-600: Facing towards water
[Singular] Casting Deadly Poison on Me @ 100.0%
Fishing1-600: Training and Vendoring
PB 1.607: Done training
PB 1.607: SellItemAction Completed for 0
PB 1.607: SellItemAction Completed for 43646
Fishing1-600: Moving to fishing spot
PB 1.607: MoveTo Action completed for type Location
Fishing1-600: Facing towards water
[Singular] Casting Deadly Poison on Me @ 100.0%
Fishing1-600: Training and Vendoring
PB 1.607: Done training

Edit:when I added a buff to my fishing rod to give me +100 the bot started working, A reboot could have helped as well.
Click to expand...



I have tried to apply a fix, please test the profile.
 
I used this yesterday and it worked perfectly. no problems at all. 150-600 took me about 3 hours with this bot and I also got all the coin achievements. GJ on this one.
 
Just letting you know I updated the content on the list of all working profession profiles, which you can find in my siggie :) Keep up the good work and thanks for helping this community!
 
ckotte said:
Pls, help!
I've never use SVN to use bots, so... explain me pls how 2 work with it and how to download that with svn
Click to expand...

There are plenty of guides if you use the search bar.. however:

Download tortoise SVN
Create a folder named whatever you wish
Open the folder
Right click in the folder.. click svn checkout
type in the url given for the svn
press okay
 
Didn't realise that people still use this profile. I think I have fixed the profile once again, please try it.
 
You must log in or register to reply here.
Back
Top