[PAID] [PAID] KittyDru - Feral DPS CR PvE+PvP (WoW 7.2) [Premium version]

[@alisha]

When I try to load the "PVP_Manual_Aena_BG_" preset, I get the following error
For other presets, it seems to change the actual settings and not throw that error, but for this preset, nothing changes.

Also idgaf about ya'll seeing my Windows username. Same as here.

Hi!

Try this:

1) check your computer do not run any software that can confilct with HB, like Antivirus, firewalls programs, for example AVP.
2) make clean install of this - without copy there any settings etc (you can find how to in wiki)
3) disable streaming all other products, disable this project and enable again to make sure u running not cached version
4) start HB and try again, let me know if this help

Looks like you have something with right access to files maybe, also check if this all didn't helped if there is under /Settings/KittyDru/ presets files exists.

 

[Khroom]

Hi!

Try this:

1) check your computer do not run any software that can confilct with HB, like Antivirus, firewalls programs, for example AVP.
2) make clean install of this - without copy there any settings etc (you can find how to in wiki)
3) disable streaming all other products, disable this project and enable again to make sure u running not cached version
4) start HB and try again, let me know if this help

Looks like you have something with right access to files maybe, also check if this all didn't helped if there is under /Settings/KittyDru/ presets files exists.

lol seems it was some firewall thing, thanks!

Also question about the manual PVP preset. Why is auto-move enabled by default? Not trying to be critical, seriously wondering.
Thanks

 

[gbreivik]

Hello, when reaching 5 CP it will do a long pause, why is this? this messages shows; [KittyDru]: Time to get 5 CP: 17.97

 

[@alisha]

Hello, when reaching 5 CP it will do a long pause, why is this? this messages shows; [KittyDru]: Time to get 5 CP: 17.97

Hi! Show 2 full lines of log where you think it do pause, from this line it's not seen as long pause -> as CP can be spend on things depending on your settings -> you should check 2 lines of log: when got 5CP and next line -> when to spend and diff time between them.

p.s. be aware than you need not only CP to cast but energy too So CR will got CP and wait to get enough energy to cast and than will cast needed spell

 

[gbreivik]

Log attached.

 

[gbreivik]

p.s. be aware than you need not only CP to cast but energy too So CR will got CP and wait to get enough energy to cast and than will cast needed spell

I know, but it reached 100 energy before it did something again.

 

[@alisha]

I know, but it reached 100 energy before it did something again.

post exactly lines where you think it is, i do not want to check all

it can be also for example:
- no unit in melee
- u not facing unit etc,

so, to check -> show me lines in log

 

[gbreivik]

It's not really that hard too CTRL+F and search for what i wrote. But sure, here is your log;

[06:43:51.508 N] [KittyDru]: Time to get 5 CP: 17.97
[06:43:52.437 V] [KittyDru]: Deleting died enemy: Iron Blood Mage@F3A1 from targets list
[06:44:15.033 N] [KittyDru]: [email protected] (30 - 70) on Brackenspore@F3A1 [ Remaining HP: 63239654 - 98.57%] CP: 5 E: 15->0 sec D: 11.77 T: 10.5 CT: 9 CM: 1.5
[06:44:15.064 N] [KittyDru]: Reappling Rake for better Multiplier: 1.4>1
[06:44:16.040 N] [KittyDru]: [email protected] (35 - 100) on Brackenspore@F3A1 [ Remaining HP: 62957259 - 98.13%] CP: 0 E: 15->0 sec D: 8.13 T: 10.5 CT: 9 CM: 1.5
[06:44:17.051 N] [KittyDru]: Savage Roar (25 - 81) on Me [ Remaining HP: 220740 - 100%] (left : 1.991 sec) CP: 1 E: 15->0 sec D: 0 T: 3 CT: 1.5 CM: 1.5
[06:44:18.168 N] [KittyDru]: Shred (40 - 56) on Brackenspore@F3A1 [ Remaining HP: 61747993 - 96.24%] CP: 0 E: 15->0.34 sec D: 9.18 T: 10.5 CT: 9 CM: 1.5
[06:44:19.162 N] [KittyDru]: Shred (40 - 31) on Brackenspore@F3A1 [ Remaining HP: 60756436 - 94.7%] CP: 1 E: 15->2.1 sec D: 9.41 T: 10.5 CT: 9 CM: 1.5
[06:44:20.216 N] [KittyDru]: Shred (40 - 6) on Brackenspore@F3A1 [ Remaining HP: 60331921 - 94.04%] CP: 2 E: 15->3.73 sec D: 9.41 T: 10.5 CT: 9 CM: 1.5
[06:44:21.176 N] [KittyDru]: Tiger's Fury (0 - 81) on Me [ Remaining HP: 220740 - 100%] CP: 3 E: 15->5.5 sec D: 0 T: 3 CT: 1.5 CM: 1.5
[06:44:21.304 N] [KittyDru]: Berserk (0 - 83) on Brackenspore@F3A1 [ Remaining HP: 59364935 - 92.53%] CP: 3 E: 15->1.29 sec D: 9.41 T: 10.5 CT: 9 CM: 1.5
[06:44:21.445 N] [KittyDru]: Berserking (0 - 80) on Me [ Remaining HP: 220740 - 100%] CP: 3 E: 15->1.15 sec D: 0 T: 3 CT: 1.5 CM: 1.5
[06:44:21.476 N] [KittyDru]: Reappling Rake for better Multiplier: 1.55>1.4


As you can see there is a 23 second pause where it didnt do shit!

 

[@alisha]

It's not really that hard too CTRL+F and search for what i wrote. But sure, here is your log;
As you can see there is a 23 second pause where it didnt do shit!

[06:43:52.437 V] [KittyDru]: Deleting died enemy: Iron Blood Mage@F3A1 from targets list
[06:44:15.033 N] [KittyDru]: [email protected] (30 - 70) on Brackenspore@F3A1 [ Remaining HP: 63239654 - 98.57%] CP: 5 E: 15->0 sec D: 11.77 T: 10.5 CT: 9 CM: 1.5

There is no information between this in logs, so i cant tell for sure why, most likely it do not have proper target at that moment or was too away from target.
Try to look at this more (if this happen again), i need more info about when and why it happens (which conditions cause it), seems to be some rare case. So than we can test out and fix it.

 

[gbreivik]

Happened again, 2 second pause. Had to manually use ferocious bite for it to start again.
[13:31:09.996 N] [KittyDru]: FPS: 64 Moonfire (0 - 14) on Blademaster Jubei'thos@A537 [ Remaining HP: 12118762 - 20.42%] CP: 1 E: 11->5.01 sec D: 1.57 T: 6.5 CT: 5 CM: 1.5
[13:31:12.473 N] [KittyDru]: FPS: 64 Shred (40 - 2) on Blademaster Jubei'thos@A537 [ Remaining HP: 11474206 - 19.33%] CP: 3 E: 11->5.19 sec D: 4.45 T: 6.5 CT: 5 CM: 1.5
[13:31:15.820 N] [KittyDru]: FPS: 65 Shred (40 - 0) on Blademaster Jubei'thos@A537 [ Remaining HP: 10279089 - 17.32%] CP: 4 E: 11->5.27 sec D: 4.08 T: 6.5 CT: 5 CM: 1.5
[13:31:16.220 N] [KittyDru]: FPS: 66 Time to get 5 CP: 17.97
[13:31:18.476 N] [KittyDru]: FPS: 67 [email protected] (30 - 0) on Blademaster Jubei'thos@A537 [ Remaining HP: 9478017 - 15.97%] CP: 5 E: 11->6.15 sec D: 4.08 T: 6.5 CT: 5 CM: 1.5

 

[@alisha]

Happened again, 2 second pause. Had to manually use ferocious bite for it to start again.
[13:31:09.996 N] [KittyDru]: FPS: 64 Moonfire (0 - 14) on Blademaster Jubei'thos@A537 [ Remaining HP: 12118762 - 20.42%] CP: 1 E: 11->5.01 sec D: 1.57 T: 6.5 CT: 5 CM: 1.5
[13:31:12.473 N] [KittyDru]: FPS: 64 Shred (40 - 2) on Blademaster Jubei'thos@A537 [ Remaining HP: 11474206 - 19.33%] CP: 3 E: 11->5.19 sec D: 4.45 T: 6.5 CT: 5 CM: 1.5
[13:31:15.820 N] [KittyDru]: FPS: 65 Shred (40 - 0) on Blademaster Jubei'thos@A537 [ Remaining HP: 10279089 - 17.32%] CP: 4 E: 11->5.27 sec D: 4.08 T: 6.5 CT: 5 CM: 1.5
[13:31:16.220 N] [KittyDru]: FPS: 66 Time to get 5 CP: 17.97
[13:31:18.476 N] [KittyDru]: FPS: 67 [email protected] (30 - 0) on Blademaster Jubei'thos@A537 [ Remaining HP: 9478017 - 15.97%] CP: 5 E: 11->6.15 sec D: 4.08 T: 6.5 CT: 5 CM: 1.5

PM me with Skype login name -> we will try to test out toghether

btw in last log there is only 2 second from 5CP to RIP (gathering Energy) - so in this case there wasnt issue, maybe another part of log?

 

[gbreivik]

Seems like it keeps getting stuck on "delete died enemy"

[13:50:17.272 N] [KittyDru]: FPS: 72 Shred (40 - 1) on Gorefiend@A537 [ Remaining HP: 125807702 - 78.3%] CP: 4 E: 11->5.27 sec D: 16.34 T: 24.5 CT: 23 CM: 1.5
[13:50:17.676 N] [KittyDru]: FPS: 68 Time to get 5 CP: 10.27
[13:50:26.295 V] [KittyDru]: FPS: 75 Deleting died enemy: Gorebound Essence@AC18 from targets list
[13:50:27.079 V] [KittyDru]: FPS: 66 Deleting died enemy: Gorebound Construct@AC1A from targets list
[13:50:27.228 N] [KittyDru]: FPS: 70 [email protected] (30 - 100) on Gorefiend@A537 [ Remaining HP: 122823697 - 76.44%] (left : 3.986 sec) CP: 5 E: 11->0 sec D: 16.34 T: 24.5 CT: 23 CM: 1.5

 

[@alisha]

Seems like it keeps getting stuck on "delete died enemy"

No deleting dead enemy have nothing related with it (its just statistic). Do you have auto targeting? Do you have valid target at that moment (alive). Also check for facing.

 

[gbreivik]

I am always facing boss, im literally sniffing his ass all the time. And yes i have auto targeting for DoT's.

But it also happens when there is just the boss alone. So i don't think it has anything to do with targeting

 

[@alisha]

I am always facing boss, im literally sniffing his ass all the time. And yes i have auto targeting for DoT's.

p.s. try to use BT tallent - just for check if you will still have same issue.
p.p.s have you changed and settings in GUI?

 

[gbreivik]

 

[Zonkers]

Love the CR so far. I'm just having a couple of issues with it. First off I made my own preset and saved it as I wanted to optimize a few settings for raiding. I have ran into an issue though with the "Auto Load Default Presets" option automatically being enabled whenever I load my custom preset even if I saved my custom preset with that setting being disabled. Now this isn't a huge problem with me but just a little annoying as sometimes I forget to disable it after loading my preset for raiding and then it ends up switching to your raid preset and I don't notice until I'm in the middle of a boss fight and it's using CDs that I chose to control manually.

The second issue I'm running into is the refresh logic on Savage Roar. Your CR is waiting to refresh a 5cp Savage Roar until it has less than 3sec left on it's duration. However, a 5cp Savage Roar can be refreshed as soon as 12.6 sec and still be within the Pandemic window. When doing a bunch of training dummy tests I have noticed this causing a lot of issues when Savage Roar and Rip are going to end basically at the same time. It's waiting until less than 3 sec are left on Savage Roar and then refreshing Savage Roar which means Rip falls off and takes a while to get reapplied since it has to build the 5cp again and wait for the 30 energy. It could however increase the uptime of Rip by refreshing Savage Roar when it has less than 12sec which would then allot 9 more seconds of time to rebuild CP and energy to reapply Rip. Another problem, which is most likely caused by the same issue, with Savage Roar is that it appears you are treating Savage Roar like a DoT in your CR. What I mean by that is I have seen the CR get 5cp and more than 25 energy but stop and do nothing for a few seconds until Savage Roar has less than 3 sec left on it's duration before refreshing it. Which would be correct logic on a DoT because if you refreshed a DoT before it entered it's Pandemic window you would have ticks of damage get cut off and it would be more worthwhile to just pool your energy before refreshing. This does not apply to Savage Roar though as it is a buff that does not change it's effectiveness if you end up refreshing it early. This problem has led to energy being wasted because the CR was sitting at 100 energy and 5cp but still waiting for the duration of the current Savage Roar to be less than 3sec. What your CR should be doing is if it determines that Savage Roar is the next logical ability to spend CP on then it should cast Savage Roar as soon as you have 5cp and 25 energy instead of waiting for the duration of Savage Roar's duration to get below a certain amount.

Here is a part of a log that is from the middle of combat where all I was doing was sitting still attacking a target dummy. After reaching 5cp it took 6 seconds for it to cast Savage Roar and 2 out of those 6 seconds I was sitting at 100 energy. The only reason I could see from my end for why it was waiting that long to cast Savage Roar, and wasting energy while it was waiting, is that Savage Roar had ~9sec left on duration when it first got 5cp and it was forced to wait until less than 3sec was left on the duration before the CR could cast Savage Roar.

[14:54:16.104 N] [KittyDru]: Time to get 5 CP: 11.52
[14:54:21.649 N] [KittyDru]: Savage Roar  (25 - 76) on Me [ Remaining HP: 291300  - 100%]  (left : 2.947 sec) + !!! Bloodtalons(1)  CP: 5  E: 10->0 sec  D: 0 T: 3 CT: 1.5 CM: 1.5

What would be amazing is if you changed the logic for prioritizing Savage Roar to work with the Pandemic window being 5.4/7.2/9/10.8/12.6 seconds long for a 1/2/3/4/5 CP Savage Roar, respectively.

 

[@alisha]

Love the CR so far. I'm just having a couple of issues with it. First off I made my own preset and saved it as I wanted to optimize a few settings for raiding. I have ran into an issue though with the "Auto Load Default Presets" option automatically being enabled whenever I load my custom preset even if I saved my custom preset with that setting being disabled. Now this isn't a huge problem with me but just a little annoying as sometimes I forget to disable it after loading my preset for raiding and then it ends up switching to your raid preset and I don't notice until I'm in the middle of a boss fight and it's using CDs that I chose to control manually.

Have you checked last tab for "Auto Load Preset" ? Also if you using this section -> you need to set presets proper in each preset you are using (after loading one -> check in GUI settings for it).
Also if you doing any changes to default one -> save it with different name, because it will ovewrite your settings (you cant change default, but you can save it with different name).

 

[@alisha]

The second issue I'm running into is the refresh logic on Savage Roar. Your CR is waiting to refresh a 5cp Savage Roar until it has less than 3sec left on it's duration. However, a 5cp Savage Roar can be refreshed as soon as 12.6 sec and still be within the Pandemic window. When doing a bunch of training dummy tests I have noticed this causing a lot of issues when Savage Roar and Rip are going to end basically at the same time. It's waiting until less than 3 sec are left on Savage Roar and then refreshing Savage Roar which means Rip falls off and takes a while to get reapplied since it has to build the 5cp again and wait for the 30 energy. It could however increase the uptime of Rip by refreshing Savage Roar when it has less than 12sec which would then allot 9 more seconds of time to rebuild CP and energy to reapply Rip.

It's not quite that logic you describe but a bit complicated one, as simcraft does. It will update SR if:
- have 5 CP, Times left < 12sec;
- you have berserk aura OR Time to gain energy <=1 OR CD time left for TF < 3
But it will checkhout it again for the case if there some error, if you want to participate in beta - feel free to PM me with your skype name

 

[Zonkers]

Have you checked last tab for "Auto Load Preset" ? Also if you using this section -> you need to set presets proper in each preset you are using (after loading one -> check in GUI settings for it).
Also if you doing any changes to default one -> save it with different name, because it will ovewrite your settings (you cant change default, but you can save it with different name).

I saved a new preset with a completely different name and I can get almost all changes I make to my new preset to save. The only thing that is not saving is the option under the "Preset" tab that says "Auto Load Default Presets". In my new preset I will uncheck that option and apply it and then save as new preset with new name. Then when I load my new preset with the new name it will still have "Auto Load Default Presets" checked.