[Official] Honorbuddy Mega Profile Pack - Lvl 1 to 110

[EchoTiger]

Not sure if this was already posted, but I can forsee it being an issue as being identified as a bot. On Hellfire Peninsula (for horde at least) it gets stuck when trying to go through a tent while mounted (unmounted is fine though).

We are stuck! (TPS: 14.7, FPS: 100, Latency: 29, Map: Expansion01, loc: <240.0862, 2618.868, 88.50614>)!
Created 1 hotspots for quest Doorway to the Abyss
Planned a path from <171.0801, 2687.891, 86.01994> to <575.0675, 2794.49, 219.8057> (564.8 yards)
We are stuck! (TPS: 14.8, FPS: 119, Latency: 29, Map: Expansion01, loc: <238.0461, 2620.71, 88.4324>)!

If you need a full log I can pull that but this was just something that I noticed while watching it. If there is something I can do on my end that can fix it let me know and I;d be happy to.

thank you

A blackspot can be added to tell the bot to avoid this tent.
I'll look into working one in - thanks for the report!

 

[EchoTiger]

I did as an instrument but still giving the same error.

Did you try a completely new install of your bot?

 

[EchoTiger]

Getting an error where the profile will get stuck trying to use AP items.

Keep getting this, over and over until I manual use AP item in my bags

[Notification]: Using Artifact Boost Itemss.
[DoWhen-767ce8(error)] For DoWhenActivity ActivityName(UseArtifactBoostItems), predicate (() => (Lua.GetReturnVal<bool>("return HasArtifactEquipped()", 0) && Me.IsAlive && !Me.Combat) && (HasItem(141383) || HasItem(138781) || HasItem(141384) || HasItem(141863) || HasItem(141404) || HasItem(141403) || HasItem(141397) || HasItem(141396) || HasItem(141394) || HasItem(141390) || HasItem(141389) || HasItem(141388) || HasItem(141387) || HasItem(141386) || HasItem(138781))) was not reset by execution.
This is a profile problem, and can result in erratic Honorbuddy behavior.
The predicate must return to 'false' after the action has been successfully executed.

I've pushed an update that should fix this error.
However, do either of you remember which artifact power item was in your bag while this error was occurring?

 

[EchoTiger]

Goal: Kill Echo Hunter x 10 [Ref: "Objective" @line 208]

As a DK bot got problems with killing those flying mobs. Bot trying to use pet, just getting closer to mob but unable to start combat. Sometimes after few minutes afk bot uses death grip, don't really know what cause this

Under most circumstances this wouldn't be a profile issue - it's more of a combat routine issue.
But at the same time, the code there seems to be using "Objective" which Objective is out of date.

I can swap the code out to not use "Objective" but I don't think it will fix the issue you're having.

 

[Radziu]

I've pushed an update that should fix this error.
However, do either of you remember which artifact power item was in your bag while this error was occurring?

Hi Echo,
Its been every AP item that you get from questing, like at the end of a Story Progress in a zone.

 

[Azoth]

I've pushed an update that should fix this error.
However, do either of you remember which artifact power item was in your bag while this error was occurring?

For me it was Tablet of Tyr and Glory of the Order.

 

[ekul]

Hi mate,

Keep getting this; ( im level 102 1 bar for ding and have completed all quests in stormheim cant get it to begin questing again)

[Avoid-767ce8(info)] Installed avoidance system
[Avoid-767ce8(info)] Uninstalled avoidance system
[LoadProfile-767ce8(info)] Loading profile 'Class Hall Loaders/[N-Quest] Warlock [Echo].xml'
Changing current profile to [N-Quest] Warlock Class Hall Loader [Echo] ($Rev: 5938 $)
[Profile]: Continuing our questing in Stormheim.
[LoadProfile-767ce8(info)] Loading profile '../[N-Quest] Stormheim [Echo].xml'
Changing current profile to [N-Quest] Stormheim [Echo] ($Rev: 5931 $)
[Avoid-767ce8(info)] Installed avoidance system
[Avoid-767ce8(info)] Uninstalled avoidance system
[LoadProfile-767ce8(info)] Loading profile 'Class Hall Loaders/[N-Quest] Warlock [Echo].xml'
Changing current profile to [N-Quest] Warlock Class Hall Loader [Echo] ($Rev: 5938 $)
[Profile]: Continuing our questing in Stormheim.
[LoadProfile-767ce8(info)] Loading profile '../[N-Quest] Stormheim [Echo].xml'
Changing current profile to [N-Quest] Stormheim [Echo] ($Rev: 5931 $)

 

[EchoTiger]

Hi Echo,
Its been every AP item that you get from questing, like at the end of a Story Progress in a zone.

For me it was Tablet of Tyr and Glory of the Order.

Okay, thanks for the infos!
Regardless, it should be fixed in the latest update.

If not, my testers will catch it and I'll be able to diagnose it further.

 

[EchoTiger]

Hi mate,

Keep getting this; ( im level 102 1 bar for ding and have completed all quests in stormheim cant get it to begin questing again)

[Avoid-767ce8(info)] Installed avoidance system
[Avoid-767ce8(info)] Uninstalled avoidance system
[LoadProfile-767ce8(info)] Loading profile 'Class Hall Loaders/[N-Quest] Warlock [Echo].xml'
Changing current profile to [N-Quest] Warlock Class Hall Loader [Echo] ($Rev: 5938 $)
[Profile]: Continuing our questing in Stormheim.
[LoadProfile-767ce8(info)] Loading profile '../[N-Quest] Stormheim [Echo].xml'
Changing current profile to [N-Quest] Stormheim [Echo] ($Rev: 5931 $)
[Avoid-767ce8(info)] Installed avoidance system
[Avoid-767ce8(info)] Uninstalled avoidance system
[LoadProfile-767ce8(info)] Loading profile 'Class Hall Loaders/[N-Quest] Warlock [Echo].xml'
Changing current profile to [N-Quest] Warlock Class Hall Loader [Echo] ($Rev: 5938 $)
[Profile]: Continuing our questing in Stormheim.
[LoadProfile-767ce8(info)] Loading profile '../[N-Quest] Stormheim [Echo].xml'
Changing current profile to [N-Quest] Stormheim [Echo] ($Rev: 5931 $)

These issues have been fixed - the profiles you're using are out of date.
As indicated by your load profile information, you're using Rev: 5931

The current version of the profiles are Rev: 5951.

Make sure the source you're using stays up to date and you will avoid most issues like this.

 

[ekul]

These issues have been fixed - the profiles you're using are out of date.
As indicated by your load profile information, you're using Rev: 5931

The current version of the profiles are Rev: 5951.

Make sure the source you're using stays up to date and you will avoid most issues like this.

Sorry mate, started reading a few pages back and just realised sorry to waste your time thanks for the support

 

[EchoTiger]

Sorry mate, started reading a few pages back and just realised sorry to waste your time thanks for the support

It's all good, no worries at all.
Good luck!

 

[chrykoolaid]

will there be suramar questing support eventually?

 

[ayye]

Hey forum

I have some problems while using those profiles im currently lvl 105. But like every 30min-1hr the bot randomly stops and i have to press start. and than he continues to run the profil. It might be some of my settings that is wrong.

I would gladly appreciate any help i can get.

 

[EchoTiger]

will there be suramar questing support eventually?

I have my doubts.

There's higher priority things right now such as Singular needing a revamp, and existing profiles needing fixing.
Not to mention that there's already Suramar profiles out there.

 

[EchoTiger]

Hey forum

I have some problems while using those profiles im currently lvl 105. But like every 30min-1hr the bot randomly stops and i have to press start. and than he continues to run the profil. It might be some of my settings that is wrong.

I would gladly appreciate any help i can get.

You have several in-game addons running.
Would any of them be affecting your quest log or would they be automating the quest turn in / pick up process?

From what I'm seeing - the bot is picking up quests and executing them properly but then there's no evidence that they're being turned in.
Instead, the bot is saying "Can not turn in quest XYZ because I don't have it in my quest log!"

Typically what causes this is the "AutoTurnIn" addon, but I don't see that you're running it.

 

[ayye]

You have several in-game addons running.
Would any of them be affecting your quest log or would they be automating the quest turn in / pick up process?

From what I'm seeing - the bot is picking up quests and executing them properly but then there's no evidence that they're being turned in.
Instead, the bot is saying "Can not turn in quest XYZ because I don't have it in my quest log!"

Typically what causes this is the "AutoTurnIn" addon, but I don't see that you're running it.

Hey,

Thank you i just realised that COsLegion was running as a auto turn in addon and that probably caused the problem.

 

[EchoTiger]

Hey,

Thank you i just realised that COsLegion was running as a auto turn in addon and that probably caused the problem.

Yup, that'd definitely would cause issues like this.
Try disabling it and see how things go.

 

[prettygreat]

How reliable is this for 100-110, and how long does that usually take? Does it require a lot of babysitting or is it pretty complete now?

 

[bambam922]

How reliable is this for 100-110, and how long does that usually take? Does it require a lot of babysitting or is it pretty complete now?

I'd say it is nearly 100% AFK with no 3rd party addons.
Please use singular though as many 3rd party routines can cause issues.

 

[prettygreat]

I'd say it is nearly 100% AFK with no 3rd party addons.
Please use singular though as many 3rd party routines can cause issues.

Great to know! I know that I used to do 1-100 99% afk which is incredible, given the complexity of the game. Glad to see more hard work going in to this!