What's new
By:
  • Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • Visit Resources
  • Visit Downloads
  • Visit Portal

Navigation Issues

ZoneName: The Azim Steppe
ZoneId: 622
Client: Global

Code: 
[13:37:50.032 D] Moving to <-589.8021, 11.04329, 475.9434> from <-595.4778, 21.37018, 502.5229>

image.jpg
image.jpg


when grind on Manzasiri it keeps landing on the top of rocks and never moving
 
clbraver said:
ZoneName: The Azim Steppe
ZoneId: 622
Client: Global

Code: 
[13:37:50.032 D] Moving to <-589.8021, 11.04329, 475.9434> from <-595.4778, 21.37018, 502.5229>

image.jpg
image.jpg


when grind on Manzasiri it keeps landing on the top of rocks and never moving
Click to expand...


Land? Sounds like an issue with a flying plugin, really out of my control then.
 
don't you control the mesh and dictate where you can and can't go what parts of the mesh are blacklisted or not blacklisted. nowhere in the ExBuddy flight plug-in does it control this.
 
clbraver said:
don't you control the mesh and dictate where you can and can't go what parts of the mesh are blacklisted or not blacklisted. nowhere in the ExBuddy flight plug-in does it control this.
Click to expand...

Its not "Blacklisted". Exbuddy is landing on a place that is not connected to anywhere else.
 
Hey there @mastahg,

I made some profiles recently that use the "ff14bot.Settings.CharacterSettings.Instance.UseMount = false;" command. Going through it appears fine but it will go through and start to fly to the next location regardless. Log below. Checking through I am not sure if it is able to enforce the command or not but it appears a no.

Two questions on this:
- Is this command working properly or is it a side effect of using the Flight Plugin? (I'll understand if I need to get in touch with someone else to check through this.)
- If not something that can be fix directly, is there a built in command to change the MountDistance within a Profile? (To try and circumvent the issues this is causing.)

Thanks ahead of time,
QL
 

Attachments

QueenLilith said:
Hey there @mastahg,

I made some profiles recently that use the "ff14bot.Settings.CharacterSettings.Instance.UseMount = false;" command. Going through it appears fine but it will go through and start to fly to the next location regardless. Log below. Checking through I am not sure if it is able to enforce the command or not but it appears a no.

Two questions on this:
- Is this command working properly or is it a side effect of using the Flight Plugin? (I'll understand if I need to get in touch with someone else to check through this.)
- If not something that can be fix directly, is there a built in command to change the MountDistance within a Profile? (To try and circumvent the issues this is causing.)

Thanks ahead of time,
QL
Click to expand...
Anything involving exbuddy is 100% unsupported.
 
Looks like nav has an issue in Tamamizu trying to go up a hillside to get to the land exit and getting stuck.
Approach location :
upload_2017-8-13_12-38-47.webp

Stuck location:
upload_2017-8-13_12-39-4.webp
 
I know you hate when we do this, but I had to cut the log to get it to upload. The reason it wasn't attached before is that it was 500 MB. I have included the original loader header, and everything from the Bot Start. Nav Sequence starts at [17:24:08.630 D] with a teleport to Tamamizu.
 

Attachments

zcrucifix said:
I know you hate when we do this, but I had to cut the log to get it to upload. The reason it wasn't attached before is that it was 500 MB. I have included the original loader header, and everything from the Bot Start. Nav Sequence starts at [17:24:08.630 D] with a teleport to Tamamizu.
Click to expand...
thts why you use winzip or 7zip to compress the file .
 
Not sure if this is the right place, but requesting the 2 prima vista zones get meshed (Zone ID: 735 and 736)
 
im having a nav issue here is the Loc it breaks from the logs

[15:20:52.125 N] Requesting path on 132 from <42.36016, 2.549917, 16.85847> to <-5.752686, 2.059875, 30.65527> within 5 () [15:20:52.155 N] Received path response to <-5.752686, 2.059875, 30.65527> in 00:00:00.0306769 ms

it gets there then idles....all 4 logs with it showing the broken point
 

Attachments

Last edited:
I am having constant navigation issues with fatebot I used to have no problems but since coming back to the game fatebot would begin working and then eventually just stand there and not move while the bot is still executing navigation and now I cant get the fatebot to move my character at all. At first I though maybe the bot needed a fresh install so I tried that, when that didn't fix it I tried doing other things like: Reopening the bot, Restarting the game client, I even tried restarting my PC multiple times in every single instance where it stops navigating the part of the log is on is always along the same lines. I also would like to note that another botbase I use, Lisbeth has no problems at all navigating and never gets stuck below is an example of the line in the log where navigation just stops

[16:24:06.068 N] Requesting path on 135 from <161.9693, 14.09586, 672.1257> to <26.90354, 45.96983, 670.1384> within 5 (Moving to fate)
[16:24:06.142 N] Received path response to <26.90354, 45.96983, 670.1384> in 00:00:00.0716132 ms

edit: after seeing that the CN Navigation servers recently had issues I felt I should clarify that I am in NA
 
Last edited:
Crusixpyro said:
I am having constant navigation issues with fatebot I used to have no problems but since coming back to the game fatebot would begin working and then eventually just stand there and not move while the bot is still executing navigation and now I cant get the fatebot to move my character at all. At first I though maybe the bot needed a fresh install so I tried that, when that didn't fix it I tried doing other things like: Reopening the bot, Restarting the game client, I even tried restarting my PC multiple times in every single instance where it stops navigating the part of the log is on is always along the same lines. I also would like to note that another botbase I use, Lisbeth has no problems at all navigating and never gets stuck below is an example of the line in the log where navigation just stops

[16:24:06.068 N] Requesting path on 135 from <161.9693, 14.09586, 672.1257> to <26.90354, 45.96983, 670.1384> within 5 (Moving to fate)
[16:24:06.142 N] Received path response to <26.90354, 45.96983, 670.1384> in 00:00:00.0716132 ms

edit: after seeing that the CN Navigation servers recently had issues I felt I should clarify that I am in NA
Click to expand...


Can you post a full log so i can look at it when i get back.
 
hello i need help please :=(
i started orderbot in conjurer and when i go into gladiator i have a navigation error.
i use y2krazy profiles "class and job quest" profile


when I go back to conjure the bot works well but I would like to continue in gladiator and there I have navigation error every time
I want to become a paladin that's why I stop the conjurer at level 15

[15:26:31.429 V] [NavGraph] Failure to find a path from <159.333, -32.09225, 331.6804> 148 to <17.79586, 40.21601, -5.386823> on 128
[15:26:31.429 N] [GetTo] Couldn't get a path to <17.79586, 40.21601, -5.386823> on 128, Stopping.
[15:26:31.430 N] Stopping the bot. Reason:[GetTo] Couldn't get a path to <17.79586, 40.21601, -5.386823> on 128, Stopping.
 
Hello, some issues while leveling miner and botanist using y2krazy profiles :

[10:58:34.151 N] [NavGraph] Objective set to Move to <-3.683439, 15.00001, -8.834866> on 131 [10:58:34.245 D] Moving to Move to <-3.683439, 15.00001, -8.834866> on 131 from <-54.71172, 10, 9.84204>
[10:58:34.287 N] Requesting path on 131 from <-54.71172, 10, 9.84204> to <-3.683439, 15.00001, -8.834866> within 5 (Move to <-3.683439, 15.00001, -8.834866> on 131)
[10:58:34.477 N] Received path response to <-3.683439, 15.00001, -8.834866> in 00:00:00.1874253 ms
[10:58:34.652 N] Sprinting [10:58:34.655 D] DoAction Spell 3 0xE0000000
[10:58:41.710 V] [Poi.Clear] Reason: Current behavior changed to MoveToTag: LineNumber: 324, XYZ: <-181.8917, 14, -15.1031>, Name: Western Than, Distance: 1, UseMesh: True, IsDone: False, HighPriority: False, InCombat: False, QuestId: 0, StepId: 0, PostCombatDelay: 0, QuestName: null, IsDoneCache: False, Behavior: null, .
[10:58:41.711 D] Removed all hooks from [HighPriorityProfileOrderBehavior_Hook]
[10:58:41.711 D] Replaced hook [ProfileOrderBehavior_Hook] ea6d9f4a-e2ad-4e99-9525-f5306fac100d [10:58:41.713 D] Moving to Western Than from <-4.646382, 15.00001, -7.255794>
[10:58:41.718 N] Requesting path on 131 from <-4.646382, 15.00001, -7.255794> to <-181.8917, 14, -15.1031> within 5 (Western Than)
[10:58:41.820 N] Received path response to <-181.8917, 14, -15.1031> in 00:00:00.1013523 ms

i hope it's enough info, i didn't understand everything yet
 

Attachments

You must log in or register to reply here.
Back
Top