[PAID] [Mage] Portal - An Advanced Honorbuddy Mage Routine [PvE/PvP]

[Ninth]

The theme I'm using for the interface isn't too friendly with scaled displays. You can alter the windows interface display scaling (see: http://www.pcworld.com/article/2098...s-desktop-look-good-on-high-dpi-displays.html) but that affects everything on your PC.

Are there any settings which are worse than others? I'll try and move them around a bit. Screenshots would be ideal.



I've gone over all of the code, and AM should be top priority when MoD is active. I'll add some debugging into the logging so it's easier to identify when it's triggering. It'll only cast AM when MoD has more than 2 seconds remaining on the buff.

Thanks for the tip. I'm able to use it on my laptop now.

The Mark of Doom/Arcane Missiles mechanic works really well when mana is within normal/reasonable limits, but I did notice when mana drops below ~75% it spammed Arcane Blast multiple times then went into Evocation all within a 10 second full Mark of Doom debuff on the target.

EDIT 1: Here is a log of me on a target dummy. There are a few instances where Missiles were not flying during Mark of Doom.

EDIT 2: Doing more testing on the dummy, still doesn't seem that Arcane Missiles is in fact top priority when Mark of Doom procs. Please fix! Thank you

EDIT 3: Once you have the MoD/AM mechanic fixed, is there any way you can set it to where, in cleave/multi target situations, Arcane Missiles will be cast on the target with the longest duration of MoD even if it isn't your current target? This would be god-like.

 

[drakir]

Is there anyone that can help and explain the concept of "Burst" for me? How does it work? And how should you use it to get the most out of your dps?

 

[Millz]

Thanks for the tip. I'm able to use it on my laptop now.

The Mark of Doom/Arcane Missiles mechanic works really well when mana is within normal/reasonable limits, but I did notice when mana drops below ~75% it spammed Arcane Blast multiple times then went into Evocation all within a 10 second full Mark of Doom debuff on the target.

EDIT 1: Here is a log of me on a target dummy. There are a few instances where Missiles were not flying during Mark of Doom.

EDIT 2: Doing more testing on the dummy, still doesn't seem that Arcane Missiles is in fact top priority when Mark of Doom procs. Please fix! Thank you

EDIT 3: Once you have the MoD/AM mechanic fixed, is there any way you can set it to where, in cleave/multi target situations, Arcane Missiles will be cast on the target with the longest duration of MoD even if it isn't your current target? This would be god-like.

<75% will be trying to get burn phase ended and evocation on cooldown again. It prevents delaying hanging onto evocation. Shouldn't happen that often given the CD?

Re 1: Wrong log file, there's no activity in that one.

Re 2: New build (just pushed, awaiting approval) will log when it's force casting AM due to MoD.

Re 3: Yeah this can be done. Will look into it for next build.

Is there anyone that can help and explain the concept of "Burst" for me? How does it work? And how should you use it to get the most out of your dps?

Burst forces all cooldowns to be used instantly without performing any checks. Toggling cooldowns hotkey enables/disables the usage of cooldowns, but when enabled will still perform the checks (that are configured in the GUI) before casting the ability.

 

[emerysong]

any way to disable the portal premium on screen pop up? it flickers and is quite annoying like the pop up that reads burst enabled and etc.

 

[Millz]

any way to disable the portal premium on screen pop up? it flickers and is quite annoying like the pop up that reads burst enabled and etc.

Yeah, option to disable it is on the advanced tab of the Portal GUI

 

[jcl8866]

The theme I'm using for the interface isn't too friendly with scaled displays. You can alter the windows interface display scaling (see: http://www.pcworld.com/article/2098...s-desktop-look-good-on-high-dpi-displays.html) but that affects everything on your PC.

Are there any settings which are worse than others? I'll try and move them around a bit. Screenshots would be ideal.



I've gone over all of the code, and AM should be top priority when MoD is active. I'll add some debugging into the logging so it's easier to identify when it's triggering. It'll only cast AM when MoD has more than 2 seconds remaining on the buff.

It definitely doesn't work exactly right. It will not cast AM while at <4 stacks if you have that checked in settings. I changed it to 1-3 and it behaved a bit better but it would cast AM with no procs at 1-3 stacks then which needless to say is not good. Not sure if that's the root of this because during AM it often won't cast them either, as was said previously.

 

[Millz]

I'd need a log file to investigate the Mark of Doom / Arcane Missiles on target issue. Checked code again and looks fine.

Pushed a new build (awaiting approval) which will change the behaviour again though....

[20/Aug/2015]
- [Arcane] Will now cast AM on any unit with our Mark of Doom active.
- Added support for CapabilityFlag 'Interrupting' to allow plugins/bots to block routine from interrupting.

 

[cbeastj]

When i tried this routine i couldnt get it to do anything without making the first spell manual, i was using enyo. I would click the target it would just face the target with my staff out like it was trying to auto attack it but wouldnt use spells. Is this normal or did i not set something up right?

 

[Millz]

When i tried this routine i couldnt get it to do anything without making the first spell manual, i was using enyo. I would click the target it would just face the target with my staff out like it was trying to auto attack it but wouldnt use spells. Is this normal or did i not set something up right?

Hey

You need to cast the first spell so that your character engages in combat. Once you're in combat the routine will take over. If you want the routine to engage when you select a unit and you aren't in combat, you can enable 'Force combat' on the general tab of the Portal GUI. Be careful though, that will attack any valid target (i.e. if you target a raid boss and you have that enabled, it'll pull it).

Cheers

 

[anubite]

heya
raiding as afrost mage and it keeps spamming polymorph over and over and I have it disabled. any ideas?

 

[Farsight]

this profile is insanly laggy for me, anyone else have this issue or is it something specifik for me alone?

 

[Ninth]

So Millz ran heroic HFC today with the new update and I constantly had to manually hit AM for the MoD procs. This would be so much more easier if the bot would do this automatically instead of me having to stop cast every time. See the cleave fights Assault, Iskar and the Xhul wipes on the attached log. It also did not target/AM targets with the MoD debuff.

Also is it possible to have a setting for Supernova to be cast when there are 2 buffs from the 4 piece T18 active? This would be extremely powerful as well.

Also have a question, when exactly is the bot designed to go into the burn phase? I have Arcane Power and PC set to use on burst which seemed to work pretty well for the most part. Just would like to know the timing of the CR itself to see if I have to manually control this as well.

Getting there man, appreciate the fine tuning.

 

[Ninth]

To add, Millz, on top of the Mark of Doom/Arcane Missiles fix:

-As I said above about the T18 buff and casting Supernova, if you could add this to the talent section of the CR, this would be HUGE. As quoted on that mage guide I posted earlier in the thread: "The 2pc bonus doesn't change our rotation, however, the 4pc bonus does change our rotation. The 4pc damage buff is quite big, and it stacks, meaning with 2 of the buffs up, you will be doing (1.12*1.12 - 1) 25.4% bonus damage. This means that you will want to try and time the usage of spells like supernova with the damage bonus from 4pc." The name of the buff is "Item - Mage T18 Arcane 4P Bonus" wowhead link: http://www.wowhead.com/spell=186165/item-mage-t18-arcane-4p-bonus

-And to add to the burn phase question, is there anyway to control that function of the CR? Being able to decide when to go into an Arcane Mage's burn phase is part of maximizing our dps. Like making a hotkey to activate it somehow.

Thanks again.

 

[handsomepx]

Hi, Millz

Could you check the code again.

When the mark of doom active , we want use AM instantly, but the routine still cast Arcane Blast to 4 stack then cast AM.

Hope you can solve this problem, thank you very much.

 

[shdwprst]

Does anyone have any good arcane PVE profiles?

Would be appriciated

 

[Millz]

heya
raiding as afrost mage and it keeps spamming polymorph over and over and I have it disabled. any ideas?

Try restarting your PC. Generally fixes the issue (boot the computer up, then windows menu -> restart.. not just turn off and on).

this profile is insanly laggy for me, anyone else have this issue or is it something specifik for me alone?

Can you post a full, unedited log file please? I get virtually no lag using this.

Ref: How To Attach a Log

So Millz ran heroic HFC today with the new update and I constantly had to manually hit AM for the MoD procs. This would be so much more easier if the bot would do this automatically instead of me having to stop cast every time. See the cleave fights Assault, Iskar and the Xhul wipes on the attached log. It also did not target/AM targets with the MoD debuff.

Also is it possible to have a setting for Supernova to be cast when there are 2 buffs from the 4 piece T18 active? This would be extremely powerful as well.

Also have a question, when exactly is the bot designed to go into the burn phase? I have Arcane Power and PC set to use on burst which seemed to work pretty well for the most part. Just would like to know the timing of the CR itself to see if I have to manually control this as well.

Getting there man, appreciate the fine tuning.

To add, Millz, on top of the Mark of Doom/Arcane Missiles fix:

-As I said above about the T18 buff and casting Supernova, if you could add this to the talent section of the CR, this would be HUGE. As quoted on that mage guide I posted earlier in the thread: "The 2pc bonus doesn't change our rotation, however, the 4pc bonus does change our rotation. The 4pc damage buff is quite big, and it stacks, meaning with 2 of the buffs up, you will be doing (1.12*1.12 - 1) 25.4% bonus damage. This means that you will want to try and time the usage of spells like supernova with the damage bonus from 4pc." The name of the buff is "Item - Mage T18 Arcane 4P Bonus" wowhead link: http://www.wowhead.com/spell=186165/item-mage-t18-arcane-4p-bonus

-And to add to the burn phase question, is there anyway to control that function of the CR? Being able to decide when to go into an Arcane Mage's burn phase is part of maximizing our dps. Like making a hotkey to activate it somehow.

Thanks again.

I've found the problem with MoD. Need to discuss this and the other items a bit further. I've sent you a PM, take a look please

Would be appriciated

There isn't a great deal to setup for arcane when using the standard talent build at the moment (http://www.wowhead.com/talent#MmwMJz-o)

 

[Ninth]

Yo Millz!

 

[Farsight]

Quote Originally Posted by Farsight View Post
this profile is insanly laggy for me, anyone else have this issue or is it something specifik for me alone?
Can you post a full, unedited log file please? I get virtually no lag using this.

i noticed i had this lagg issue with all profiles and i whent to HB support instead where i found a fix ^^ turns out my comp was in a power save mode had 0.76gHz instead of 4gHz

 

[handsomepx]

Hi,Millz

Why portal just use polymorph today.

What's happening.

 

[handsomepx]

I restart my computer

It's ok now.