Lunkers

[Bobble]

For alliance :
The bot goes to first fishing spot, catches the first lunker and after the pool depletes he gets stuck (1 [PB + FB] Blind Lake Lunker Fishing.xml). Same for the 2nd profile ...after the fishing pool depletes, he just waits there (2 [PB + FB] Jawless Skulker Lunker Fishing.xml) 1.74 version - alliance side.

I'm selecting proffesion buddy (wihout any settings modifications) + loading the first profile from my garrison and using the water walking mount / water walkin on toon.
Do i need to select any special settings in Proffesion buddy or autoangler ? If so please state on your first post.

Professionbuddy should then load a different profile once it's completed the current profile taking you to the next place. At the end of the code does the profile that it's asking it to load match the one that is saved in the folder?

 

[HBNewbb]

Playcuboi - turn fishing in pools off - this isnt a pool fishing profile. It's a FISH TIL 5 profile.

The new profile (prior to reverting to AA today) didnt work well. First time I loaded it, it hearthed and quit. Second time, the HS was down, so it ran to a pool, fished for 5 min, and when the HS was up, hearthed and quit. It was using the regular HS and not t

It's NOT a fishing buddy issue though. I had changed the old profiles to use FB instead of AA weeks ago, and it worked successfully. Matter fact, as I typed this, i was fishing with the older 1.7.2 revised for FB instead of AA.

 

[Sumi]

The profiles run on the Horde side wonderful thank you for it.

Suggestions for improvement:

Replace AutoAngler by FischingBuddy this is possible;
To make a quest turn in an extra profile and optiemieren something please;
A random query to catch the fish possible so that he does not always equal the route runs to perhaps even equal min. 3 different stand cake per fish species

 

[HBNewbb]

Got my mount and my land shark now. Also have modified and used this to fish up a single lunker from each area to finish off getting nat pagle on a few alts.. thanks a ton bro

What mount?

 

[Subsidius]

Hello Osqui,

Thank you for the amazing profile(s)! They work amazingly! Although, within the past couple days, I notice that when fishing, the bot doesn't always click the fishing bobber, causing me to lose out on fish loot. It just lets the fishing timer run out before re-casting. So I figured I'd do some troubleshooting and tested to see if this was an issue with FishingBuddy by using it, and FishingBuddy worked everytime without fail. Once I put it back on ProfessionBuddy, it started only grabbing the fishing bobber every 2nd or 3rd cast. Could there possibly be a problem with the profiles mixing in ProfessionBuddy with FishingBuddy? I noticed that in the Honorbuddy Log window, there is a constant stream of "PB: MoveTo Action completed for type Location" and was wondering if that could be conflicting with something. Also, I changed the lines in your profiles to use "AutoAngler" to use "FishingBuddy" and was wondering if that could cause problems as well, although I doubt it since FishingBuddy is the exact same as AutoAngler. Any suggestions/help would be very much appreciated!

Regards,
Subsidius

Edit: Forgot to say I'm using your Alliance Lunker profiles.

 

[Osqui]

Hello Osqui,

Thank you for the amazing profile(s)! They work amazingly! Although, within the past couple days, I notice that when fishing, the bot doesn't always click the fishing bobber, causing me to lose out on fish loot. It just lets the fishing timer run out before re-casting. So I figured I'd do some troubleshooting and tested to see if this was an issue with FishingBuddy by using it, and FishingBuddy worked everytime without fail. Once I put it back on ProfessionBuddy, it started only grabbing the fishing bobber every 2nd or 3rd cast. Could there possibly be a problem with the profiles mixing in ProfessionBuddy with FishingBuddy? I noticed that in the Honorbuddy Log window, there is a constant stream of "PB: MoveTo Action completed for type Location" and was wondering if that could be conflicting with something. Also, I changed the lines in your profiles to use "AutoAngler" to use "FishingBuddy" and was wondering if that could cause problems as well, although I doubt it since FishingBuddy is the exact same as AutoAngler. Any suggestions/help would be very much appreciated!

Regards,
Subsidius

Edit: Forgot to say I'm using your Alliance Lunker profiles.

You see the switching profiles and the moveto from PB as well as the attaching the lure in your logs the looting of the fish is usually not recorded. might be lag or could be something else will run it and see what happens.
On a side not I'll be adding in the same profiles but one set will be for AutoAngler and the other will be for Fishingbuddy. This way you can choose which you prefer

 

[Subsidius]

You see the switching profiles and the moveto from PB as well as the attaching the lure in your logs the looting of the fish is usually not recorded. might be lag or could be something else will run it and see what happens.
On a side not I'll be adding in the same profiles but one set will be for AutoAngler and the other will be for Fishingbuddy. This way you can choose which you prefer

Hmm ok. I'll try running the bot tomorrow for an hour and then post the log here for you. Maybe that will help you figure out what's going on for me (and possibly others) haha.

 

[miminio]

im trying for 1st time to use this profile..im starting it with fishbuddy but nothing happends.
help pls

 

[Kmica]

im trying for 1st time to use this profile..im starting it with fishbuddy but nothing happends.
help pls

This is a Professionbuddy profile.

 

[Gladios]

Hello, I'm in big trouble. I'm disconnected as soon as I start running this profile.
Here I speak the process used to start your profile, if you think something is wrong please help me.
After Connect in WoW and HB.
I select Professionbuddy
Select horde profile: 1 [PB + AA] Fire Ammonite Lunker Fishing
Start HB.

note:
My HB has no AutoAngler2 because I installed today.
After steps spoken to up the HB performs actions as using AB profile [Archaeology], looking for a trainer.
When in PB> Bot Config, an error appears exactly like the image below.

I ignore and continue, so I'll Settings.

Here I did not configure anything.

then I realize that BP does not work with FB, what should I do?

My settings.
http://i.imgur.com/0eC0Snf.png
http://i.imgur.com/ZnUkuMG.png
http://i.imgur.com/kz72izw.png

Your profile must be amazing and I would love to use, excuse me if I'm doing something wrong, but please help me.

 

[Exciter101]

@ Gladios: Does your Toon have Tailoring as an Profession? - Same here with my warlock. Try a different char, with other professions than Tailoring. Maybe it will work.

 

[Gladios]

@ Gladios: Does your Toon have Tailoring as an Profession? - Same here with my warlock. Try a different char, with other professions than Tailoring. Maybe it will work.

@ Exciter101, thank you for the answer somehow you're right about the PB profile work with FB when the character has no tailoring.
I tested this on another character, Min + Herb.
This was the result.

I'm still with my falling wow.

 

[Subsidius]

You see the switching profiles and the moveto from PB as well as the attaching the lure in your logs the looting of the fish is usually not recorded. might be lag or could be something else will run it and see what happens.
On a side not I'll be adding in the same profiles but one set will be for AutoAngler and the other will be for Fishingbuddy. This way you can choose which you prefer

So I did some more troubleshooting, and it seems to only happen when attempting to catch Sea Scorpion Lunkers. It failed at clicking the fishing bobber almost every 3rd time, resulting in almost 2 1/2 - 3 hours just to catch 3 Sea Scorpion Lunkers. Hopefully this helps you narrow down as to what is going on.

 

[Osqui]

Hello, I'm in big trouble. I'm disconnected as soon as I start running this profile.
Here I speak the process used to start your profile, if you think something is wrong please help me.
After Connect in WoW and HB.
I select Professionbuddy
Select horde profile: 1 [PB + AA] Fire Ammonite Lunker Fishing
Start HB.

note:
My HB has no AutoAngler2 because I installed today.
After steps spoken to up the HB performs actions as using AB profile [Archaeology], looking for a trainer.
When in PB> Bot Config, an error appears exactly like the image below.

I ignore and continue, so I'll Settings.

Here I did not configure anything.

then I realize that BP does not work with FB, what should I do?

My settings.
http://i.imgur.com/0eC0Snf.png
http://i.imgur.com/ZnUkuMG.png
http://i.imgur.com/kz72izw.png

Your profile must be amazing and I would love to use, excuse me if I'm doing something wrong, but please help me.

Download and try AutoAngler : AutoAngler2LTW

Also on fishingbuddy and autoangle2 under the Fishing Tab turn everything to false and see if this helps

 

[Osqui]

So I did some more troubleshooting, and it seems to only happen when attempting to catch Sea Scorpion Lunkers. It failed at clicking the fishing bobber almost every 3rd time, resulting in almost 2 1/2 - 3 hours just to catch 3 Sea Scorpion Lunkers. Hopefully this helps you narrow down as to what is going on.

I'll try today and see whats happening on the sea scorpion side and thanks for the update.

 

[Subsidius]

I'll try today and see whats happening on the sea scorpion side and thanks for the update.

Ok, cool thanks! And thanks for the quick replies/updates!

Edit: Also, I forgot to mention that I keep getting pulses from fishing buddy, for exampled: "FishingBuddy: Warning: It took 3.0381738 seconds to pulse. This can cause missed bites. To fix try disabling all plugins." to which I disabled all plugins and still got these pulses. Could this be why I am missing a bunch of my fishing bites?

Edit 2: The number ranges anywhere from 1-15 seconds to pulse. I do not get this pulse when using FishingBuddy alone.

 

[Subsidius]

Also, quick question Osqui. Is there a way to make a profile to just catch 5 Blink Lake Lunkers, Garrison Hearth, hand them in for the coins, then restart the profile to do it all over again?

 

[Osqui]

Also, quick question Osqui. Is there a way to make a profile to just catch 5 Blink Lake Lunkers, Garrison Hearth, hand them in for the coins, then restart the profile to do it all over again?

Yes, but I choose not to do it since being in the same area over and over and over can get you reported. If you choose to do it that way let me know and I'll show you how to change it or do it for you.

 

[Osqui]

Fixed the issue with "PB: MoveTo Action completed for type Location" spaming, this could have caused a few problems so try it out and see if things are better.
Updated the Alliance side for the sea scorpions and watched it fish up 5 lunkers never missing a cast.

Everything is updated to version 1.7.5 now so give it a try

 

[Osqui]

Ok, cool thanks! And thanks for the quick replies/updates!

Edit: Also, I forgot to mention that I keep getting pulses from fishing buddy, for exampled: "FishingBuddy: Warning: It took 3.0381738 seconds to pulse. This can cause missed bites. To fix try disabling all plugins." to which I disabled all plugins and still got these pulses. Could this be why I am missing a bunch of my fishing bites?

Edit 2: The number ranges anywhere from 1-15 seconds to pulse. I do not get this pulse when using FishingBuddy alone.

The warning your seeing is just a AutoAngler or FishingBuddy problem, it pulses for certain checks but does not affect anything, I get them all the time when it switchs gear to fishing gear but that's about it, if I lag abit when putting on bait or such I might see it. Really nothing to worry about