What's new
By:
  • Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • Visit Resources
  • Visit Downloads
  • Visit Portal
RebornBuddy Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Kick's BuddyWing Profiles

Bot: [R - Dark] 1-10 Knight and Consular - Tython [Kick]

Profile: On quest "The Forge" QuestId 0xE000D89DCB7C295F it doesn't want to go in the cave we needed to go in to do the mission, It would just turn around and run away and sit in a counter and not move. I stopped the bot and put it in the cave myself and it just ran out and went to the same spot. It worked when I put the bot into the story room(Green force fields that are part of story line) myself. It also does not know its away about the cave because it gets stuck on all the walls. Had to get him out myself.

P.S. Im a consular.
 
I am not using 1-10 anymore. SHould of made that clear. I am using "[R - Dark] 10-17 Coruscant [Kick]" now
 
DanDan said:
I am not using 1-10 anymore. SHould of made that clear. I am using "[R - Dark] 10-17 Coruscant [Kick]" now
Click to expand...


This is because bioware has changed lots of quest rewards across the board for all quests. These old profiles do not know they have been changed.


Walter
 
It appears that the space profiles are not working. I load the profile of choice, it launches the mission, then it never fires or does anything else. Any suggestions?
 
FelixFTW said:
It appears that the space profiles are not working. I load the profile of choice, it launches the mission, then it never fires or does anything else. Any suggestions?
Click to expand...
Space missions like ppl says - not supported anymore by BW, coz ppl who use that - got permaban, read other topics too plz :)
 
Voss empire profile just ran me to the bottom left of the map and jumped off a cliff. Not sure what went wrong...

Edit: Upon further inspection, it is a repeating habit of the profile. I start in the first area of the planet, start the bot, and it immediately goes to

"My Location" X="-36.475" Y="27.02311" Z="18.05"

Which is standing on the edge of a cliff on the bottom left of the map. Is this a known issue?

Is there a way to upload my whole log? Here is a partial clip from the last bit of it:

[20:38:15.723 D] Generating path to PickupQuestTag: Treemo for New Test Markets <-125.2992, 1.586594, 54.7517>
[20:38:15.723 E] Got response from server, validating.
[20:38:15.723 E] Response has 2 hops. Converting to vectors and path queue.
[20:38:15.723 D] Nav Service path generated.
[20:38:15.723 D] Generated path to <-125.2992, 1.586594, 54.7517> (PickupQuestTag: Treemo for New Test Markets) with 2 hops.
[20:38:17.292 D] Moving to next hop: <-36.475, 27.04146, 18.05>, T: None (PickupQuestTag: Treemo for New Test Markets) D: 0.02175289
[20:38:18.865 D] Navigation reached current destination. Within 99.42117
[20:38:20.430 D] Generating path to PickupQuestTag: Treemo for New Test Markets <-125.2992, 1.586594, 54.7517>
[20:38:20.430 E] Contacting nav server for path.
[20:38:20.754 D] Waiting for path request to finish...
[20:38:21.050 D] Nav callback called.
[20:38:21.050 D] Navigation returned a partial path. Destination may not be reachable by mesh!
[20:38:22.318 D] Generating path to PickupQuestTag: Treemo for New Test Markets <-125.2992, 1.586594, 54.7517>
[20:38:22.318 E] Got response from server, validating.
[20:38:22.318 E] Response has 2 hops. Converting to vectors and path queue.
[20:38:22.318 D] Nav Service path generated.
[20:38:22.318 D] Generated path to <-125.2992, 1.586594, 54.7517> (PickupQuestTag: Treemo for New Test Markets) with 2 hops.
[20:38:23.880 D] Moving to next hop: <-36.475, 27.04146, 18.05>, T: None (PickupQuestTag: Treemo for New Test Markets) D: 0.02175289
[20:38:25.456 D] Navigation reached current destination. Within 99.42117
[20:38:27.026 D] Generating path to PickupQuestTag: Treemo for New Test Markets <-125.2992, 1.586594, 54.7517>
[20:38:27.026 E] Contacting nav server for path.
[20:38:27.315 D] Waiting for path request to finish...
[20:38:27.614 D] Nav callback called.
[20:38:27.614 D] Navigation returned a partial path. Destination may not be reachable by mesh!
[20:38:28.886 D] Generating path to PickupQuestTag: Treemo for New Test Markets <-125.2992, 1.586594, 54.7517>
[20:38:28.886 E] Got response from server, validating.
[20:38:28.886 E] Response has 2 hops. Converting to vectors and path queue.
[20:38:28.886 D] Nav Service path generated.
[20:38:28.886 D] Generated path to <-125.2992, 1.586594, 54.7517> (PickupQuestTag: Treemo for New Test Markets) with 2 hops.
[20:38:30.454 D] Moving to next hop: <-36.475, 27.04146, 18.05>, T: None (PickupQuestTag: Treemo for New Test Markets) D: 0.02175289
[20:38:32.023 D] Navigation reached current destination. Within 99.42117
[20:38:33.584 D] Generating path to PickupQuestTag: Treemo for New Test Markets <-125.2992, 1.586594, 54.7517>
[20:38:33.584 E] Contacting nav server for path.
[20:38:33.878 D] Waiting for path request to finish...
[20:38:34.157 D] Nav callback called.
[20:38:34.157 D] Navigation returned a partial path. Destination may not be reachable by mesh!
 
Ty. Here is the log. From just looking at how he moves, it is looking like he is trying to get to a part of voss that you can only access by taking the taxi. Is there a plugin or a line of code that can be modified to tell him to get on the taxi and go where he needs to be? He also isnt using his mount and is instead attempting to run everywhere.

Sorry for the "dumb" questions. I'm just new here and am having trouble getting started with the bot.

View attachment 2013-12-05 20.17.txt
 
lolnrdrage said:
Ty. Here is the log. From just looking at how he moves, it is looking like he is trying to get to a part of voss that you can only access by taking the taxi. Is there a plugin or a line of code that can be modified to tell him to get on the taxi and go where he needs to be? He also isnt using his mount and is instead attempting to run everywhere.

Sorry for the "dumb" questions. I'm just new here and am having trouble getting started with the bot.

View attachment 112445
Click to expand...

as far as i know the only way to use a mount is to use fight at joes and enable usage of mount.. it's not hard coded into the bot to work, joe did a workaround that lets his combat routine use them
 
Gotcha. Just figured there was something in the bot since it asks me mount name in settings. But as for the actual questing problem, do I need to use a certain combat routine to enable taxi use? Voss is like Nar Shadaa where taxi use is vital.

Thanks!
 
nope it works when it wants too.. kicks profiles are rough and seem kind of incomplete and meshing and nav aint 100% spot on either, as far as i can tell these dont even get updated or anything anymore
 
Well is there any other profiles that are good for leveling? I've been using a grind profile for while im away cause I know it works for hours without messing up, but I'd like to have a questing/etc. bot, as just killing the same mobs over and over doesn't grant nearly as much exp as questing. Wouldnt mind babysitting a bot as I know its hard to get something like that perfect, but I'd like it to at least work somewhat.
 
not that im aware of at this stage i mean i babysit a sorc to 55 using these profiles, every now and then i'd hve to take over and do some stuff but it was ok
 
Hmm. Havent had much luck with this one. Keeps running random places and engaging mobs it doesn't need to fight. Are you using Fight at Joes? And how did Voss go for you?
 
lolnrdrage said:
Voss empire profile just ran me to the bottom left of the map and jumped off a cliff. Not sure what went wrong...

Edit: Upon further inspection, it is a repeating habit of the profile. I start in the first area of the planet, start the bot, and it immediately goes to

"My Location" X="-36.475" Y="27.02311" Z="18.05"

Which is standing on the edge of a cliff on the bottom left of the map. Is this a known issue?

Is there a way to upload my whole log? Here is a partial clip from the last bit of it:

[20:38:15.723 D] Generating path to PickupQuestTag: Treemo for New Test Markets <-125.2992, 1.586594, 54.7517>
[20:38:15.723 E] Got response from server, validating.
[20:38:15.723 E] Response has 2 hops. Converting to vectors and path queue.
[20:38:15.723 D] Nav Service path generated.
[20:38:15.723 D] Generated path to <-125.2992, 1.586594, 54.7517> (PickupQuestTag: Treemo for New Test Markets) with 2 hops.
[20:38:17.292 D] Moving to next hop: <-36.475, 27.04146, 18.05>, T: None (PickupQuestTag: Treemo for New Test Markets) D: 0.02175289
[20:38:18.865 D] Navigation reached current destination. Within 99.42117
[20:38:20.430 D] Generating path to PickupQuestTag: Treemo for New Test Markets <-125.2992, 1.586594, 54.7517>
[20:38:20.430 E] Contacting nav server for path.
[20:38:20.754 D] Waiting for path request to finish...
[20:38:21.050 D] Nav callback called.
[20:38:21.050 D] Navigation returned a partial path. Destination may not be reachable by mesh!
[20:38:22.318 D] Generating path to PickupQuestTag: Treemo for New Test Markets <-125.2992, 1.586594, 54.7517>
[20:38:22.318 E] Got response from server, validating.
[20:38:22.318 E] Response has 2 hops. Converting to vectors and path queue.
[20:38:22.318 D] Nav Service path generated.
[20:38:22.318 D] Generated path to <-125.2992, 1.586594, 54.7517> (PickupQuestTag: Treemo for New Test Markets) with 2 hops.
[20:38:23.880 D] Moving to next hop: <-36.475, 27.04146, 18.05>, T: None (PickupQuestTag: Treemo for New Test Markets) D: 0.02175289
[20:38:25.456 D] Navigation reached current destination. Within 99.42117
[20:38:27.026 D] Generating path to PickupQuestTag: Treemo for New Test Markets <-125.2992, 1.586594, 54.7517>
[20:38:27.026 E] Contacting nav server for path.
[20:38:27.315 D] Waiting for path request to finish...
[20:38:27.614 D] Nav callback called.
[20:38:27.614 D] Navigation returned a partial path. Destination may not be reachable by mesh!
[20:38:28.886 D] Generating path to PickupQuestTag: Treemo for New Test Markets <-125.2992, 1.586594, 54.7517>
[20:38:28.886 E] Got response from server, validating.
[20:38:28.886 E] Response has 2 hops. Converting to vectors and path queue.
[20:38:28.886 D] Nav Service path generated.
[20:38:28.886 D] Generated path to <-125.2992, 1.586594, 54.7517> (PickupQuestTag: Treemo for New Test Markets) with 2 hops.
[20:38:30.454 D] Moving to next hop: <-36.475, 27.04146, 18.05>, T: None (PickupQuestTag: Treemo for New Test Markets) D: 0.02175289
[20:38:32.023 D] Navigation reached current destination. Within 99.42117
[20:38:33.584 D] Generating path to PickupQuestTag: Treemo for New Test Markets <-125.2992, 1.586594, 54.7517>
[20:38:33.584 E] Contacting nav server for path.
[20:38:33.878 D] Waiting for path request to finish...
[20:38:34.157 D] Nav callback called.
[20:38:34.157 D] Navigation returned a partial path. Destination may not be reachable by mesh!
Click to expand...

Well the bot is clearly stating this:
Code: 
Navigation returned a partial path. Destination may not be reachable by mesh!
Which means Mesh issues or wrong zone. If the bot needs to go to another zone for the quest, i think its a quest profile issue,
where the bot doesnt take a transport to the needed zone. Resulting in the repeating Suicide runs...
 
Update April 23, 2013:
I will start running these profiles again and developing again. Give me some time ... if you're interested in donating specific class / rep syntax, i'll gladly accept it.

Bugs: Please keep bugs to the point, include valid info, and a log. The more details, the better. I'm rusty with this game and I'll need all of the assistance that I can get, in terms of where stuff is / what you need.
Click to expand...

I would love to donate to you man, I'm very lost on how to create profiles and saw a lot are outdated. Working on my Trooper/Vandguard and was wondering if you could p.m. about making profiles for Tatooine-Corellia. I also have skype if you could message me while I'm online there as it would help me out alot so ty :)

SKYPE: nathan.vega3
 
Hi!
republic/light 14-17 grind profile doesnt work.
I use Joe routines + 14-17 profile.
Was trying use default combat but it doesnt work.

Standing at Justicar Territory (using your images for farm locations).

Bot doesn't run, bot doens't looking for enemy, he just stay at one place.

LOG: Trace element grid is not supported (all time)
 
Last edited:
You must log in or register to reply here.
Back
Top