What's new
By:
  • Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • Visit Resources
  • Visit Downloads
  • Visit Portal

Honorbuddy v2.5.11769.750

Status
Not open for further replies.
bartoletta said:
Leveling with warrior in tanaris, seems to break mid quest

View attachment 147184

i was using quest bot and a non-singular routine, but it could be the routine, will test
Click to expand...
bartoletta said:
here it is again, it moves to one spot then breaks

View attachment 147187


EDIT: after manually doing those quests, bot just doesnt move and break upon starting
Click to expand...
Hi, Bartoletta,

We've discarded both of these reports, since the logs are not against this release.

cheers,
chinajade


[size=-2]Ref: Bartoletta's original post #1 w/log[/size]
[size=-2]Ref: Bartoletta's original post #2 w/log[/size]
 
Cybershoot said:
started to level skinning before WoD and used my profile to skin.
View attachment 147204
As I started the bot keeps killing and looting the mobs but doesn't skin them.
I searched for the issues but maybe its cause the mobs are unknown, since there is a log part called:
"Looting Unkown Object Guid:0x00000000000001010000000000000000"
Logs:
View attachment 147205
I have to say that my other profiles worked.
I also have set loot/ninja/skin mobs.
I only use to kill and skin the mobs since I empty my bags personally.

EDIT:
I skinned by myself until the mobs are from "orange" skinning to "yellow" skinning to test if it works now. And yes ironically it works. Maybe Blizz changed the skin-level on some mobs?
Click to expand...
Hi, Cybershoot,

MANY thanks for that profile and the log! The problem has been difficult to replicate. I've added your information and observations as another datapoint on HB-1318 ("Honorbuddy is not skinning").

cheers,
chinajade


[size=-2]Ref: Cybershoot's problem report w/log[/size]
 
slider2222 said:
I have uninstalled, reinstalled, updated HB, and repeated those steps many many times since the release of the WoD pre-expansion patch. Everytime I try to run Raid Bot in either Singular, Oracle, or Necrophelia, I get the message over and over again, "Error trying to save the settings file: Cannot create a file when that file already exists." Attached is a screenshot and my log. Any help is appreciated (if this issue has been addressed of course). Thanks.
Click to expand...
Hi, Slider2222,

Although this report appears related to HB-1327 ("Problems saving settings file"—which was a 'permissions' problem), the failure mode is different. As such, we've opened HB-1348 (""Error Trying to Save Settings File" File Already Exists"). HB-1348 may just be closed as a duplicate of HB-1327, but since we don't know what was involved in the repair of HB-1327, we can't make that assumption.

cheers,
chinajade


[size=-2]Ref: Slider2222's problem report w/log[/size]
 
Last edited:
Navarobowflex said:
Can someone please tell me whats going on with this error I'm receiving. I've done clean install after clean install, following the guide posted by Chinajade.


http://i.imgur.com/wLlroKj.jpg

Yet I still get the same error, trying to run any profile, using singular. On the questing , or grind botbase. (bgbuddy too for what its worth)

Driving me insane. I've attached a log this time

View attachment 147222
Click to expand...
Hi, Navarobowflex,

This is obviously not a bug in Honorbuddy, but in using it.
We don't know the usage problem for certain, but you might start by disabling the streaming of all products from the Buddy Store. The first post in this thread points to instructions on how to get this done.

When you figure out which product is causing the issue, you should contact the author and ask him to make the message clearer. A title in the popup dialog that identifies the product would be an awesome start.

If you are not able to figure out this problem, please do not post it in this thread again—as it is not a bug with Honorbuddy and doesn't belong in this thread.

cheers,
chinajade


[size=-2]Ref: Navarobowflex's original post w/log[/size]
 
Last edited:
savydeviate said:
Just wanted to say I can confirm this build has resolved this issue for me:
HB-1318: Honorbuddy is not skinning
Actually, looks like it skips skinning sometimes.
It will kill, loot skin, then kill and move on to another mob until eventually it skins again.
Click to expand...

Hi, Savydeviate,

The skinning issue may be better in .750, but it is definitely not fixed. We're having problems replicating the problem, and your information has been added as another data point on HB-1318. Thank you.

cheers,
chinajade


[size=-2]Ref: Savydeviate's problem report w/log[/size]
 
TreeK said:
Hey Chinajade - I posted an issue earlier today about an issue buying items on the AH which you archived as already being on the known issue list. I did check the list and saw nothing mentioning buying from the AH, just this one dealing with posting:

HB-1324: ProfessionBuddy not posting items on Auction House

As the two issues are closely related, perhaps this one does cover both buy & selling on the AH, but as the buying problem is not explicitly mentioned, I wanted to make sure you were aware of it. Feel free to archive me again if it is in fact covered and I will take the (second) hint.
Click to expand...

Hi, Treek, and thank you for speaking up!

You are absolutely right. The other report was written against selling, and I made a (bad) assumption that buying would automatically be covered because its the 'flip side'. We've opened HB-1349 ("ProfessionBuddy not buying items on the Auction House") against the issue you initially submitted.

We considered expanding HB-1324 to cover buying and selling, but decided it'd be more expedient to just open a second report and allow it to be closed as a duplicate, if necessary.

I believe everything is put right, now. And, the state of the first few posts should have an accurate reflection of this. Please forgive my mea culpa.

cheers,
chinajade
 
Last edited:
HB stop working when running Dung buddy on LFR

View attachment log.txtHave log attached.

Just a few quick question also. Does LFR still excist ? Can it be used to play normal dung so i can get garros loom? Any eta on Uper Blackrock Spire dungeon before draenor release?

Tnx in advance
 
chinajade said:
You might try clearing your caches.

This doesn't appear to be a bug with Honorbuddy, but something awry with your installation.
Click to expand...

G'morning, chinajade.

After deleting all caches, Honorbuddy did not launch anymore - it would just login and tell me to:

"Please wait a few seconds while Honorbuddy initializes."

I uninstalled and reinstalled... same results. Can't start it up anymore. Any helpful suggestions? :)

Log: x

EDIT: Oh wait! There it is! Took around 3-4 minutes tho'.

EDIT 2: Allright - same problems as before. All caches had been deleted, HB uninstalled and properly installed again. Still HB (Questbuddy) will not start doing his lovely thing in The Burning Crusade.

Log: View attachment 3640 2014-10-22 09.56-3.txt

EDIT 3: Uninstalled. Cleared (deleted) all remaining caches. Rebooted. Fired up the game and HB - again it takes forever to initialize...
 
Last edited:
@ Sea

[07:56:33.624 D] Executable Path: D:\Games\!CALC2\Calc.exe
Click to expand...

Renaming Honorbuddy.exe will crash it, because it has a CRC self-check build in.
Also, some Plugins/Botbases depend on that original name to run properly.
If the exe is not present, they will crash too.
Leave the name original.
 
Last edited:
Sea said:
Still takes forever to initialize. Uninstalled and reinstalled again - sitting at the "Please wait a few seconds while Honorbuddy initializes." output for 3-4 minutes again already.
Click to expand...

[07:56:33.629 D] MeshesFolderPath: xxx
Click to expand...

You deleted your meshes folder path.
HB tries to download the meshes, but has not path to save them.

Better make a clean installation from the ZIP file (not the installer) into a new and empty folder, i.e. C:\HB\...
Do not copy any Addons to the new folder and try again.
If there are still problems, post a new log file.

HTH ;)
 
Since patch i cant use Professionbuddy, i try to load "Mining-Herb (1-600)flying-GB2" and bot doesn´t start .

Here is my log, if someone can help me plz will be great. Thx.
 

Attachments

ok here are 5 of the 6 logs i was about to post.
only six cause i've done a dozen fresh installs hoping it would fix itself.



three logs are from the hunter im currently leveling. (Cava Plugin)
the problem is that it will never ever use quest items.
instead if it has a quest which provides the item for use, it asumes the quest is ready for turn-in and spams the NPC indefinitely.
if the quest needs an items to be gathered and then used, it just gathers it, then asumes the quest is done and spams the NPC indefinitely.
if the quest needs more than one type of items gathered but not used, it gathers all of the first item on the list and then stays there trying to gather the same first item instead of moving on the second.
if i dont finish these quests manually it will not go on.
it did not go to Outland on it's own. i had to take it there myself.
in Outland, after doing a couple quests on its own, it wrote an error like "trying to complete quest XXX, failing, stopping bot". but it never had that quest in the first place! same after restart, so it cannot move on.

that is very odd, since i leveled a pandaren rogue with Cava 1-81 just before patch 6.0 and everything went smoothly

and another thing is that when i start honorbuddy with Cava enabled, instead of just havin to press Start like i used to,
it says "Cava Plugin Disposed", waits a couple seconds, then shows the Cava settings page, and i have to press start from there.



the other two logs are from my mage who farms BGs for honor.

i just wake up finding it idle. having played just a couple BGs, then close itself.
i use ARelog. it detects the problem, says something like "game idle for too long, restarting process".
but does not restart honorbuddy. just opens the game but does not log in or anything.

after watching it, all my toon does is stay at the graveyard or the starting area, casting Arcane Brilliance every now and then. not moving.

which is again odd, since i used it all the time for years without a problem.
 

Attachments

Last edited:
My fps in game when HB are running will go from high to low over a period of a few min and repeat. As soon as i turn off HB it will stop when its not running and im playing it does not happen. Or in any other game. new game ect.
Im using Cava profiles but i think it also happens with brodieman. any class i play did not happen with HB version before 6.0.2 patch

Update Might be a tinfoil hat thing but Minimizing HB to try effects the issue,.
View attachment 11160 2014-10-22 11.51.zip
 
Last edited:
ArcheologyBuddy seems to attempt to cast the "Survey" spell before its CD has run out, which results in the bot failing to cast it and moving to the next spot, missing the spot that actually contains the fragment (It will eventually get the fragment after rotating around it for a while). Also, I noticed that the bot sometimes move in the wrong direction other than the one pointed to by the survey i.e. Survey points to North, and the bot moves to East (not even North-East). I'm not sure if that is intended (i.e. A trangulation approach... etc.) or not.

The above 2 issues does not interfere with the bot, it still works fine, just not as efficient, as it is taking longer to get the fragment.
 

Attachments

Hatoiz1 said:
I don't know if this is a bug or not but, my bot keeps spamming "You need to be in Northern Stranglehorn." I think it's just when it's questing, it stops when I stop the bot.


View attachment 147332
Click to expand...
I'm not totally certain, but I think that has something to do with the ItemForAuraQuestHelper plugin, if you have it enabled and using Kick's questing profiles. There's something that you have to use when in Northern Stranglethorn that the plugin uses for you while there. I believe this used to happen to me on earlier versions of HB when I was running Kick's questing profiles and I had that plugin enabled. It doesn't hurt anything, but it can be annoying seeing it all the time.
 
chinajade said:
Hi, Flyg,

Try doing a "clean install"—no third-party products—and repeat the problem. If the problem does not manifest, its a third-party product interaction.

MaiN has also suggested Spyware can cause WoWclient crashes (and has captured several internal examples to prove it). You should also run a Spyware detection and removal tool.

And one last thing, I've personally had problems with BitDefender in 'aggressive' settings monitoring wireless connections. It could be your AV interfering, and you may want to look into that also.

At this time, we do not believe this to be an Honorbuddy bug, but interference from an external program. See HB-1306 in the '.750 Known Bugs List.

cheers,
chinajade

[SIZE=-2]Ref: Flyg's original post w/log[/SIZE]
Click to expand...

Hi,

There were quite a few other posts which have now been removed (no logs) from people with the same crash.

However I can now report that I've been running for 2 hours without any crashes! In case this helps others what I did was :

1) I had disabled a bunch of performance counters and a google search implied Kernel.dll errors could be caused by that so enabled them again
Code: 
cmd
[COLOR=#333333][FONT=Segoe UI regular]Rebuilding the counters:
     cd c:\windows\system32
     lodctr /R
     cd c:\windows\sysWOW64
     lodctr /R[/FONT][/COLOR]
[COLOR=#333333][FONT=Segoe UI regular]Resyncing the counters with Windows Management Instrumentation (WMI):
     WINMGMT.EXE /RESYNCPERF[/FONT][/COLOR]

However wow still crashed so :

1) Totally uninstalled every .net framework I had on my pc (including the 3.5 built in one with win 7 from features).
2) Re-enabled .net 3.5 after a reboot and then installed .net 4
<at this point wow may have have been ok but kept going>
3) Totally uninstalled every visual c++ I had and then installed them all again (just all versions I could find) - 2005, 2008, 2010 an 2012 both x86 and x64 versions
4) Ran windows update to patch them
5) Just for the hell of it also ran .net repair tool from MS (Download Microsoft .NET Framework Repair Tool from Official Microsoft Download Center)

Then finally logged into wow and played fine with singular for an hour. THen enabled streaming of a few custom cc's and played ok for another hour.

Something is a bit different though as my previous setup of .net and c++ etc used to run Honorbuddy prior to 6.02 totally fine, i had bots going for days with no issues.

anyways looks good :D

p.s. initially tried the repair batch file someone has on this forum for .net but didn't fix it so must been combination of all.
 
Hi
When i use singular with a blank profile cause I have no CR at the moment for my monk. This is the issue i am seeing. If i enter combat and I wish to move the character away 10 feet or so to avoid an aoe from a mob or player, I cannot do that at all. The bot will not let me perform any movement of the character while in combat.

I have Allow user movement set to true under the section user movement while botting and suspend movement set to 5.

I have tried this on 10-20 for suspend and still cannot move the character while in a battle. I used to be able too a few months ago. Please let me know what i am doing wrong.
This issue has been going on since version .746 however at that time I had a cr which worked (TuanHA) and did not need to use singular so i did not bother with it. Now i am waiting for the cr to be released so i decided to get out the monk which i have not used since patch day and used singular to mess around killing mobs and a couple of players or a while. Figured i would turn this issue in. I found no work around.

View attachment 147457

btw, singular does do a very nice job.
 
Status
Not open for further replies.
Back
Top