What's new
By:
  • Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • Visit Resources
  • Visit Downloads
  • Visit Portal

Honorbuddy for MoP 5.0.4-5.0.5

Status
Not open for further replies.
buzzerbeater said:
Read the staring post, think, read again, think again, until you find the solution.

(Oh yeah, it clearly says AutoAngler isnt supported yet, delete this crap.)

:D
Click to expand...

Really?!?! I believe I asked about the CC's not AutoAngler2

So... Re-read, think, think again, and try to be smarter then a fifth grader
 
For me grinding in order to level works just fine. Questing failed, because my character "stucked" at the Questgiver. ArchBuddy is not working properly as well. My alt use to fly to the digites but when he was about 100yards before the digite the alt stopped and did nothing after 30sec he walks 1 yard to the digite and stopped and that over and over again. Gatherbuddy works fine for me as well!
The CC for DK Blood/Frost was not working very good as well. But its just a test release so problems are normal i guess. Thanks for release the test version so we can start botting even when its not perfect actually. Sry for bad englisch :P
 
GGarcia said:
Really?!?! I believe I asked about the CC's not AutoAngler2

So... Re-read, think, think again, and try to be smarter then a fifth grader
Click to expand...

This is what you wrote:

"Before I even press start on this bot whats going on with these errors?"

All of your errors in the log attached are related to AutoAngler2, so what do you want from me?
Fix your imaginary CC errors?

How about being a little bit more friendly and not talking such bullshit like "being smarter than a fifth grader"?
 
maggibg said:
I ran a few dungeons with my 85 Paladin tank, using singular, turned off autotarget and movement, everything seems to work fine, rotation is working. The only think that is bothering me is that every 5-10 seconds or so, wow freezes for like 1-2 seconds, then just resumes. There is no error.

Any ideas ?
Click to expand...

Deactivate your WoW ingame addons. Just rename the Interface/Addons subfolder in your WoW folder for that.
 
BGBuddy isn't working properly. It will queue for a random BG, it will even accept it, but once in the BG the bot will just sit there and not move. I searched the forums, but there are a ton of posts not dealing with anything. Sorry if this has already been posted.
 

Attachments

buzzerbeater said:
This is what you wrote:

"Before I even press start on this bot whats going on with these errors?"

All of your errors in the log attached are related to AutoAngler2, so what do you want from me?
Fix your imaginary CC errors?

How about being a little bit more friendly and not talking such bullshit like "being smarter than a fifth grader"?
Click to expand...

Shit my bad wrong log this one isnt even showing up in the log files selected buy it saying this:

Compiler Error: d:\Desktop\HB\Routines\Bowman, Marksman and Survival PvE\Bowman Marksman.cs(11,12) : error CS0234: The type or namespace name 'Logic' does not exist in the namespace 'Styx' (are you missing an assembly reference?)
Compiler Error: d:\Desktop\HB\Routines\Bowman, Marksman and Survival PvE\Bowman Marksman.cs(12,12) : error CS0234: The type or namespace name 'Logic' does not exist in the namespace 'Styx' (are you missing an assembly reference?)
Compiler Error: d:\Desktop\HB\Routines\Bowman, Marksman and Survival PvE\Bowman Marksman.cs(13,12) : error CS0234: The type or namespace name 'Logic' does not exist in the namespace 'Styx' (are you missing an assembly reference?)
Compiler Error: d:\Desktop\HB\Routines\Bowman, Marksman and Survival PvE\Bowman Marksman.cs(16,7) : error CS0246: The type or namespace name 'TreeSharp' could not be found (are you missing a using directive or an assembly reference?)
Compiler Error: d:\Desktop\HB\Routines\Bowman, Marksman and Survival PvE\Bowman Marksman.cs(20,23) : error CS0246: The type or namespace name 'CombatRoutine' could not be found (are you missing a using directive or an assembly reference?)
Compiler Error: d:\Desktop\HB\Routines\Bowman, Marksman and Survival PvE\MarksForm1.cs(14,12) : error CS0234: The type or namespace name 'Logic' does not exist in the namespace 'Styx' (are you missing an assembly reference?)
Compiler Error: d:\Desktop\HB\Routines\Bowman, Marksman and Survival PvE\MarksForm1.cs(15,12) : error CS0234: The type or namespace name 'Logic' does not exist in the namespace 'Styx' (are you missing an assembly reference?)
Compiler Error: d:\Desktop\HB\Routines\Bowman, Marksman and Survival PvE\MarksForm1.cs(16,12) : error CS0234: The type or namespace name 'Logic' does not exist in the namespace 'Styx' (are you missing an assembly reference?)
Initialization complete.
 
Was trying Kicks [Fly][A - Quest] LK 68-80 [Kick] (from the: default profiles\1-85 questing profile pack) with my 72 human demo lock, never quested in northrend so took the boat from SW and at the docs in Valiance keep i started the bot, he got to the first quest and picked the quest up, and continued to try to do that for a while. then i stopped the bot.
 

Attachments

mortyra said:
Was trying Kicks [Fly][A - Quest] LK 68-80 [Kick] (from the: default profiles\1-85 questing profile pack) with my 72 human demo lock, never quested in northrend so took the boat from SW and at the docs in Valiance keep i started the bot, he got to the first quest and picked the quest up, and continued to try to do that for a while. then i stopped the bot.
Click to expand...


Known Bugs & Issues


Singular does not fully support rogue and warlock yet. <--------------------Yup Its There
Professionbuddy does not work yet.
Dungeonbuddy does not work yet.
Archbuddy still needs to be updated
AutoAngler does not work yet.
There are Issues with BGBuddy
Most QuestBehaviours and Questing itself have flaws. <----------------Yup Its There
Custom plugins and combat routines found on the forums needs to be updated by the authors before they work again.
 
Working great! Been only farming in twilight tho so at least I can say my paly is having fun. :)

I did notice, each time a new update is released - my toon kinda goes crazy flying. Goes in circles for a little bit, then flies on, stops, flies in circles, etc. I fixed it (at least I think I did) but just re-loading the profile.
 
it was just a simple bug report if some 1 is intrested in the .log then fine else idc. Dont reply on that its just a waste of posts. and iv read the starter thred
 
GGarcia said:
Shit my bad wrong log this one isnt even showing up in the log files selected buy it saying this:

Compiler Error: d:\Desktop\HB\Routines\Bowman, Marksman and Survival PvE\Bowman Marksman.cs(11,12) : error CS0234: The type or namespace name 'Logic' does not exist in the namespace 'Styx' (are you missing an assembly reference?)
Compiler Error: d:\Desktop\HB\Routines\Bowman, Marksman and Survival PvE\Bowman Marksman.cs(12,12) : error CS0234: The type or namespace name 'Logic' does not exist in the namespace 'Styx' (are you missing an assembly reference?)
Compiler Error: d:\Desktop\HB\Routines\Bowman, Marksman and Survival PvE\Bowman Marksman.cs(13,12) : error CS0234: The type or namespace name 'Logic' does not exist in the namespace 'Styx' (are you missing an assembly reference?)
Compiler Error: d:\Desktop\HB\Routines\Bowman, Marksman and Survival PvE\Bowman Marksman.cs(16,7) : error CS0246: The type or namespace name 'TreeSharp' could not be found (are you missing a using directive or an assembly reference?)
Compiler Error: d:\Desktop\HB\Routines\Bowman, Marksman and Survival PvE\Bowman Marksman.cs(20,23) : error CS0246: The type or namespace name 'CombatRoutine' could not be found (are you missing a using directive or an assembly reference?)
Compiler Error: d:\Desktop\HB\Routines\Bowman, Marksman and Survival PvE\MarksForm1.cs(14,12) : error CS0234: The type or namespace name 'Logic' does not exist in the namespace 'Styx' (are you missing an assembly reference?)
Compiler Error: d:\Desktop\HB\Routines\Bowman, Marksman and Survival PvE\MarksForm1.cs(15,12) : error CS0234: The type or namespace name 'Logic' does not exist in the namespace 'Styx' (are you missing an assembly reference?)
Compiler Error: d:\Desktop\HB\Routines\Bowman, Marksman and Survival PvE\MarksForm1.cs(16,12) : error CS0234: The type or namespace name 'Logic' does not exist in the namespace 'Styx' (are you missing an assembly reference?)
Initialization complete.
Click to expand...

Post in the thread for bowman? But if I was the CC dev and you posted in the thread which clearly has a link in the op to the new, updated version, I'd get a bit annoyed with you.
 
Gather buddy

gather buddy is not reporting nodes gathered when you hit the status button or when it stops.
 
hi1674 said:
Not much working atm.

Think i'll wait another week or so ;)
Click to expand...

Same here, some people are so impatient to let them finish it so Im going to be safe and enjoy it more when its fully released.
 
I'm trying to use PartyBot for a 3 way RAF grind session. I hardly have any experience with PartyBot so I may very will just not have the settings right but since the trouble I'm running into is with this test build I figured I would attach my logs here.

The error I'm getting is "Sequence contains no matching element" after I hit Start with the PartyBot. This error is only occuring on the slave party bots, not the primary.

View attachment 5860 2012-09-09 18.22.txt
View attachment 5480 2012-09-09 18.24.txt
 
Last edited:
So basically this is a updated version of the dev version that allows GB2 to work... in a limited mode? I'm glad you were forthright and revealed that most of it would be broke at this point... I read and read about all the rage posts on here and I just laughed!!! The forums get funny when people don't read!!!

FYI:

PROPS to caderly
.​
 
Envenom appears to be bugged.

SpellManager.CanCast("Envenom", target, false, false); returns false, even when it should be true.
SpellManager.Spells.TryGetValue("Envenom", out wowSpellVar); out is null.

This works:

var envSpell = WoWSpell.FromId(32645); // returns the correct spell.
envSpell.CanCast; // returns true.
 
Ive tried using it on my priest and all i get is:

[Profile Message]: Compiling Hellfire Peninsula Quests
Mounting: Black War Bear
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp
Moving to Type: QuestPickUp

Then bot doesnt move
 
Status
Not open for further replies.
Back
Top