thebrodieman
Well-Known Member
- Joined
- Sep 11, 2011
- Messages
- 6,015
- Reaction score
- 81
Fresh install. Use Plugin, or copy from SVN (while its still available).
HB ARCHIVES: The Complete MoP Daily Experience--DO NOT DELETE
- Thread starter lphomiej
- Start date
Fresh install. Use Plugin, or copy from SVN (while its still available).
thebrodieman
Well-Known Member
- Joined
- Sep 11, 2011
- Messages
- 6,015
- Reaction score
- 81
Check the forums.
thebrodieman
Well-Known Member
- Joined
- Sep 11, 2011
- Messages
- 6,015
- Reaction score
- 81
NEW PLUGIN ADDED!
The new plugin, offered as a zip file on Post 1, will now be the source of all updates!
There is no SVN for this plugin, as all updates are done on plugin startup. All profile and QB updates will also be from this plugin.
The zip file must be used to install, as it contains files that denote revision in them, and assist in the updating process.
Installation instructions are in Post 1.
Please see the plugin's GUI for more information on how to use and run my Compendium!
The new plugin, offered as a zip file on Post 1, will now be the source of all updates!
There is no SVN for this plugin, as all updates are done on plugin startup. All profile and QB updates will also be from this plugin.
The zip file must be used to install, as it contains files that denote revision in them, and assist in the updating process.
Installation instructions are in Post 1.
Please see the plugin's GUI for more information on how to use and run my Compendium!
i think the shieldwall dailies walking is bugged? Oi aint afriad of no ghosts decided to run outside right around thro the quarry and up above the cave then all the way back around into the cave just to start the quest. it also does something strange with the walking back goes all away around out to sea then back in. thro the fort.
oh and can u please fix the pull distance issue, it sets it to low eg 1 then to 0 then to 1 then to 0 and gets stuck on 0 and cant fight and dies.
oh and can u please fix the pull distance issue, it sets it to low eg 1 then to 0 then to 1 then to 0 and gets stuck on 0 and cant fight and dies.
same
Quote Originally Posted by Zamphire View Post
I'm having a problem with the CLoudSerpent quest where you bandage the injured serpents. It flies to the island and just stands there. Here's a log for you.
On second thought, I've tried uploading the log three times now and it keeps failing. Maybe you can find it without it.
Sorry without a log file there isn't much I can diagnose. If your log is over 1MB You can zip it. .Zip though non rar.
Im having the exact same problem, bot says profile has to many errors and quits. Ill try to get a log over later.
Quote Originally Posted by Zamphire View Post
I'm having a problem with the CLoudSerpent quest where you bandage the injured serpents. It flies to the island and just stands there. Here's a log for you.
On second thought, I've tried uploading the log three times now and it keeps failing. Maybe you can find it without it.
Sorry without a log file there isn't much I can diagnose. If your log is over 1MB You can zip it. .Zip though non rar.
Im having the exact same problem, bot says profile has to many errors and quits. Ill try to get a log over later.
HBfanboy1980
Active Member
- Joined
- Jan 16, 2012
- Messages
- 1,137
- Reaction score
- 11
hey Brodie just an FYI the profiles for farming are no longer killing the Swooping Plainshawk
Just standing there and getting beat up.
View attachment 6164 2013-07-15 13.00.txt
just 1 example log with my druid. i have this happen with every toon who gets those types of plants..
Just standing there and getting beat up.
View attachment 6164 2013-07-15 13.00.txt
just 1 example log with my druid. i have this happen with every toon who gets those types of plants..
View attachment 13044 2013-07-15 20.50.txt
hello
i been experiencing several bugs since the pluging instalation today.
the bot seens.. well like a bot.. just stands arround.. starts walking agins walls..or stands arround.. XD
trys to mount up wind serpents even if ya set the mounts manually it auto resets it to automatic...and did i mention standing arround? XD
hope ya can help me
hello
i been experiencing several bugs since the pluging instalation today.
the bot seens.. well like a bot.. just stands arround.. starts walking agins walls..or stands arround.. XD
trys to mount up wind serpents even if ya set the mounts manually it auto resets it to automatic...and did i mention standing arround? XD
hope ya can help me
thebrodieman
Well-Known Member
- Joined
- Sep 11, 2011
- Messages
- 6,015
- Reaction score
- 81
View attachment 99150
hello
i been experiencing several bugs since the pluging instalation today.
the bot seens.. well like a bot.. just stands arround.. starts walking agins walls..or stands arround.. XD
trys to mount up wind serpents even if ya set the mounts magnually it auto resets it to automatic...and did i mention standing arround? XD
hope ya can help me
The plugin only acts as a profile selector, spell avoidance monitor, and automatic downloader. These plugins are the same you used before except are now in 1 plugin instead of 3. Should have no effect of mounts and movement as nothing in the profiles have changed. Please submit a full log file so that I can see the issue, if any.
ok so this log i'm sending is after i manually did golden pagoda quests and toon is already on pagoda ready to deliver.
so all the bot has to do is detect quests completed and deliver.
and he.. stand arround just looking at the beautyfull agoda and Alani in the skyes XD
here goes the log
View attachment 10108 2013-07-15 22.01.txt
Edit1: After reading the log myself i tink i understand and kind of fix it.. not really becouse i'm worried that tomorrow will have the same issue but i belive that the problem is in mesh it wasnt loading. i added manually and seens to work now.
will test to see how it goes.
thebrodieman
Well-Known Member
- Joined
- Sep 11, 2011
- Messages
- 6,015
- Reaction score
- 81
ok so this log i'm sending is after i manually did golden pagoda quests and toon is already on pagoda ready to deliver.
so all the bot has to do is detect quests completed and deliver.
and he.. stand arround just looking at the beautyfull agoda and Alani in the skyes XD
here goes the log
View attachment 99157
The link to your mesh directory is missing. This is located in HB settings. Until then it has no mesh files to access because it doesn't know where they are.
Hello again
ok so i'm still having a small conflit and i dont know why.
Mabe ya have some insite of what may be.
Hope to read from ya soon =)
ok so i'm still having a small conflit and i dont know why.
Mabe ya have some insite of what may be.
Code:
[Brodies Plugin] Profile Swapper: Saving config file: C:\Bots\Honorbuddy-Dailys - C?pia\Plugins\BrodiesPlugin\Settings\(....Server Name...)\(...Character Name...)\ProfileSwapper.config
[Brodies Plugin] Profile Swapper: Settings Saved
Error trying to save the settings file: The process cannot access the file 'C:\Bots\Honorbuddy-Dailys - C?pia\Settings\(....Server Name...)\(...Character Name...)\CharacterSettings.xml' because it is being used by another process.thebrodieman
Well-Known Member
- Joined
- Sep 11, 2011
- Messages
- 6,015
- Reaction score
- 81
Known issue on my end, but should not affect performance of the bot or plugin. I am currently reworking the save code to be more efficient, and will be up in a near future update.
Oh ok tk u m8 =)
erm just 1 more thingy... sorry to be a pain in the ass.. but...
Tillers.. so quests not acepting again dont knot if it's just me but the issue is he just stands there opening and closing the interaction window doest pick up or deliver..but if i manually accept it runs the quest properly.. just doest deliver or pick up.
again i looked at the log..and pl bare in mind i'm new to this but it looks like it keeps aborting interaction i send new log below
View attachment 8896 2013-07-16 12.43.txt
Hope it helps .. and sorry again for being a pain =(
Hi,
First, thanks for all the work
Since a few days the daily profiles do not work well anymore. It looks like a mesh issue that you mentiond in a previous post. Tested a fresh HB and zip file today with the same result. The bot starts the profiles but just stands there with the golden lotus quests at the padoga. With minor movement intervention to get in range of the quest givers, the profile picks up the quests and stand there again doing nothing.
After a small glance in the fresh logs, mesh errors are detected.
Added the logs so you can confirm if it is the same issue.
Any idea when this will be fixed?
Greets
First, thanks for all the work
Since a few days the daily profiles do not work well anymore. It looks like a mesh issue that you mentiond in a previous post. Tested a fresh HB and zip file today with the same result. The bot starts the profiles but just stands there with the golden lotus quests at the padoga. With minor movement intervention to get in range of the quest givers, the profile picks up the quests and stand there again doing nothing.
After a small glance in the fresh logs, mesh errors are detected.
Added the logs so you can confirm if it is the same issue.
Any idea when this will be fixed?
Greets
thebrodieman
Well-Known Member
- Joined
- Sep 11, 2011
- Messages
- 6,015
- Reaction score
- 81
Hi,
First, thanks for all the work
Since a few days the daily profiles do not work well anymore. It looks like a mesh issue that you mentiond in a previous post. Tested a fresh HB and zip file today with the same result. The bot starts the profiles but just stands there with the golden lotus quests at the padoga. With minor movement intervention to get in range of the quest givers, the profile picks up the quests and stand there again doing nothing.
After a small glance in the fresh logs, mesh errors are detected.
Added the logs so you can confirm if it is the same issue.
Any idea when this will be fixed?
Greets
This issue is seemingly random, but is an hb issue and in no way tied to the profiles. It can seemingly happen to anyone on any profile.
To fix, simply go to HB settings, top center is the mesh directory location box. Enter the location of your meshes (by default the folder is called HonorbuddyMeshes and can be searchable) and the issue is resolved.
thebrodieman
Well-Known Member
- Joined
- Sep 11, 2011
- Messages
- 6,015
- Reaction score
- 81
Do you have tillers friendship items in your inventory, creating additional turnins on the NPC? This may or may not generate issues in whether or not the NPC claims to still have quests available.
thebrodieman
Well-Known Member
- Joined
- Sep 11, 2011
- Messages
- 6,015
- Reaction score
- 81
I have no direct control over interactwith, or any QB and QBCore releases for honorbuddy. I would recommend submitting a support ticket for this.