What's new
  • Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • Visit Resources
  • Visit Downloads
  • Visit Portal

Having problem with repair

KBK2006

Community Developer
Joined
Jan 15, 2010
Messages
171
Reaction score
15
I have made an profile of my own in Outland to farm ores and another for herbs.

Both of them have an problem with repairing when it hit 50% durability in netherstorm. It starts movin to "26,8" in netherstorm or the floating island left of "Forge base Gehena". And just says movin to repair guy and flying until it hits the invicible wall and keep flying. One time it fly for about 4 hours at that point :(

This happens about 2 times of 6 runs.
Will post the logs when this happens again.
But from what i have noticed the repair-guys cant be set in the profiles?

Did notice something now that the bot had 35% durability and was in ShadowmoonValley and it started to move to all the way to Zangramash just to repair and not the repair guy in SMV :confused:
 
From my experience, the only repair vendor that is in Outlands and is hardcoded into GB is the one you mentioned in Zangarmarsh.

The bad thing is, if your durability drops, the bot just flies a straight line to the repair vendor from what I have seen. That means, if there are big mountains in the way, it will get stuck.
 
we need your log and a screenshot if possible
 
Did to day start herbing and when it got to netherstorm i made sure it hade about 75% durability and the dismount to get to 63% just to provoke an repair.

Posted log + Picture in wow where it happens
 

Attachments

  • WoWScrnShot_100610_142528.webp
    WoWScrnShot_100610_142528.webp
    83 KB · Views: 61
  • Debug.txt
    Debug.txt
    82.1 KB · Views: 44
  • WoWScrnShot_100610_142532.webp
    WoWScrnShot_100610_142532.webp
    50.7 KB · Views: 40
Last edited:
Thx for the report,we will check it
 
Back
Top