[H - Quest] 10-60 Kalimdor (LowHangingFruit AFK)

[benkoren]

Ive encounted some small problems in Feralas...

10-40 worked perfect, but once i got into feralas, it was continually getting stuck or dying. I ran it over night, when i checked in the morn, he was just standing in one spot and had only leveled up by one, anyone else have same issue?

I ain't complaining, this profile is great, just thought id share what happened.

Please attach your log. There's nothing I can do to help (nor improve the profile) without it.

 

[15outland]

Hi, I had to upload logs on mega upload as it exceeds the honorbuddy size limit (its 6.4mb)

ID ?d=ALKMNXS1

I couldnt link it without it being censored -.-

so its www.mega upload .com / ?d=ALKMNXS1

(without spaces)



I also get the "Cannot generate path"

example:

Could not generate full path from {-4773.083, 438.6992, 17.1178} to {-4811.506, 198.6059, 41.22456} (time used: 0 milliseconds)
Could not generate full path from {-4771.991, 439.2815, 17.7982} to {-4811.506, 198.6059, 41.22456} (time used: 0 milliseconds)
Could not generate full path from {-4771.526, 439.9807, 17.9104} to {-4811.506, 198.6059, 41.22456} (time used: 0 milliseconds)
Could not generate full path from {-4771.273, 440.849, 17.59487} to {-4811.506, 198.6059, 41.22456} (time used: 0 milliseconds)
Loading Kalimdor_30_40
Successfully generated path from {-4770.458, 450.7081, 17.84661} to {-4811.506, 198.6059, 41.22456} in 200 milliseconds
Could not generate full path from {-4771.217, 446.2769, 16.53878} to {-4811.506, 198.6059, 41.22456} (time used: 0 milliseconds)
Could not generate full path from {-4771.98, 443.9305, 17.42935} to {-4811.506, 198.6059, 41.22456} (time used: 0 milliseconds)
Could not generate full path from {-4772.34, 442.7022, 17.96887} to {-4811.506, 198.6059, 41.22456} (time used: 0 milliseconds)
Could not generate full path from {-4772.709, 441.443, 18.01571} to {-4811.506, 198.6059, 41.22456} (time used: 1 milliseconds)
Could not generate full path from {-4773.035, 440.3305, 17.63067} to {-4811.506, 198.6059, 41.22456} (time used: 0 milliseconds)
Could not generate full path from {-4773.358, 439.2258, 16.85245} to {-4811.506, 198.6059, 41.22456} (time used: 0 milliseconds)

sometimes if i stop it and run it, it fixes it but other times it doesn't, just cant figure out what causes it

 

[benkoren]

Hi, I had to upload logs on mega upload as it exceeds the honorbuddy size limit (its 6.4mb)

ID ?d=ALKMNXS1

I couldnt link it without it being censored -.-

so its www.mega upload .com / ?d=ALKMNXS1

(without spaces)



I also get the "Cannot generate path"

example:

Could not generate full path from {-4773.083, 438.6992, 17.1178} to {-4811.506, 198.6059, 41.22456} (time used: 0 milliseconds)
Could not generate full path from {-4771.991, 439.2815, 17.7982} to {-4811.506, 198.6059, 41.22456} (time used: 0 milliseconds)
Could not generate full path from {-4771.526, 439.9807, 17.9104} to {-4811.506, 198.6059, 41.22456} (time used: 0 milliseconds)
Could not generate full path from {-4771.273, 440.849, 17.59487} to {-4811.506, 198.6059, 41.22456} (time used: 0 milliseconds)
Loading Kalimdor_30_40
Successfully generated path from {-4770.458, 450.7081, 17.84661} to {-4811.506, 198.6059, 41.22456} in 200 milliseconds
Could not generate full path from {-4771.217, 446.2769, 16.53878} to {-4811.506, 198.6059, 41.22456} (time used: 0 milliseconds)
Could not generate full path from {-4771.98, 443.9305, 17.42935} to {-4811.506, 198.6059, 41.22456} (time used: 0 milliseconds)
Could not generate full path from {-4772.34, 442.7022, 17.96887} to {-4811.506, 198.6059, 41.22456} (time used: 0 milliseconds)
Could not generate full path from {-4772.709, 441.443, 18.01571} to {-4811.506, 198.6059, 41.22456} (time used: 1 milliseconds)
Could not generate full path from {-4773.035, 440.3305, 17.63067} to {-4811.506, 198.6059, 41.22456} (time used: 0 milliseconds)
Could not generate full path from {-4773.358, 439.2258, 16.85245} to {-4811.506, 198.6059, 41.22456} (time used: 0 milliseconds)

sometimes if i stop it and run it, it fixes it but other times it doesn't, just cant figure out what causes it

Which quest is it trying to execute when you get the navigation errors? You can also zip up the file to upload it on the HB forums.

 

[15outland]

Which quest is it trying to execute when you get the navigation errors? You can also zip up the file to upload it on the HB forums.

Oh, I didn't catch the quest names, but it also does it while just grinding...

View attachment 29-3-2011_9_29_39 AM 1244 Log.zip

also, whats downloading mesh, how does it work? does it download it from the site? because that takes awhile to download, Im kinda new to HB, so, sorry for noob question XD

 

[atg68]

yes, downloading mesh means it's downloading the terrain data from the HB site.. you need to just leave it and let it download.. it'll only need to do it once...

 

[15outland]

oh okay, tyvm

 

[janne123]

Second time using this profile, loving it! Thanks again.

First stop when collecting Kreenig Snarlsnout's snout or whatever for The Far Watch Offensive he couldn't find the path in the mine where Kreenig is, had to finish manually.
Second stop an hour later at x-roads, with "use flight paths" enabled, he tried to fly somewhere probably camp taurajo or that other FP closeby, which I didn't have, had to disable use flight paths.

Other than that no stops yet, at level 16 now, will report back at the next stop!

edit; if logs are needed tell me so, I can post them when I get home.

 

[Stiopare]

Incredible profile! Keep this work up! A Northend or Outlands profile would also be nice

 

[core74]

thanks for the profile

at around lvl 15 my toon tries to go vendor stuff to Ramja Skyspinner but dies repeatedly by these honor's stand guards ;\

 

[appelkwark]

@level 47 I Get this error.

Could not create current in quest bot; exception was thrown
Object reference not set to an instance of an object.

View attachment error.txt

 

[benkoren]

Second time using this profile, loving it! Thanks again.

First stop when collecting Kreenig Snarlsnout's snout or whatever for The Far Watch Offensive he couldn't find the path in the mine where Kreenig is, had to finish manually.
Second stop an hour later at x-roads, with "use flight paths" enabled, he tried to fly somewhere probably camp taurajo or that other FP closeby, which I didn't have, had to disable use flight paths.

Did the character fall down the hole right before the top of the cave? If the char drops down the whole I don't think the mesh supports the area you land in. I have the hole in a blackspot, but in the end the navigator needs to move around it. I'll take a look and see what else can be done to help with this.

thanks for the profile

at around lvl 15 my toon tries to go vendor stuff to Ramja Skyspinner but dies repeatedly by these honor's stand guards ;\

Yeah, I really wish the API allowed for a minimum level attribute for vendors. You were navigating to a vendor suitable for 30+ chars. I'll remove that vendor in the next revision.

@level 47 I Get this error.

Could not create current in quest bot; exception was thrown
Object reference not set to an instance of an object.

View attachment 20266

This is a bug in HB - reload the profile manually and you should be set.

 

[core74]

Yeah, I really wish the API allowed for a minimum level attribute for vendors. You were navigating to a vendor suitable for 30+ chars. I'll remove that vendor in the next revision.

ok cool, and thanks for the fast reply.

also, should i take off harvest minerals for this profile? i mean im new to HB this is my first profile i had it turned on but every couple hours or so when i check up on it, its saying "Could not generate full path from .... etc." in a spot where it probably just mined.

 

[15outland]

What mount is best used with this profile?

I'm using the tauren 100% ground mount and it seems to get stuck a lot in door ways, won't unmount though, just keeps trying to barge through lol

 

[atg68]

^^ thats a HB issue.. taurens are really bad at getting stuck because of their size and the size of their mount.. you could disable mount and just use travelform (if you're a druid).. it's a bit slower, but you wont get stuck.

 

[benkoren]

ok cool, and thanks for the fast reply.

also, should i take off harvest minerals for this profile? i mean im new to HB this is my first profile i had it turned on but every couple hours or so when i check up on it, its saying "Could not generate full path from .... etc." in a spot where it probably just mined.

Harvesting should not be a problem, but I do recommend turning off "Use Flightpaths" - that has been bugged ever since I've started using HB (almost 3 months now).

 

[T@rget]

Absolutely astonishing this profile.

Booted it up on my level 12 Goblin Ench Shaman (Pretty much eats the mobs without rest time), it ran from Org to Razor Hill to get food, ran back to Org to get a quest and ran back to Razor Hill to get a 2nd quest but that was my fault .

After that it went on to quest in The Barrens but Auto Equip messed it up with Heirlooms, after that I used EquipItems and went to work. When I came back I was level 28 instead of 12 ^^

Two pointers though it didn't get mount skill, but I simply got it myself dunno if that's a Goblin thing or not.
Also I catch it attacking gray mobs now and then, could be because I started up at 12? (Goblins dont leave the Isle before level 12)

Thank you very much for your effort on this, well appreciated

 

[benkoren]

Absolutely astonishing this profile.

Booted it up on my level 12 Goblin Ench Shaman (Pretty much eats the mobs without rest time), it ran from Org to Razor Hill to get food, ran back to Org to get a quest and ran back to Razor Hill to get a 2nd quest but that was my fault .

After that it went on to quest in The Barrens but Auto Equip messed it up with Heirlooms, after that I used EquipItems and went to work. When I came back I was level 28 instead of 12 ^^

Two pointers though it didn't get mount skill, but I simply got it myself dunno if that's a Goblin thing or not.
Also I catch it attacking gray mobs now and then, could be because I started up at 12? (Goblins dont leave the Isle before level 12)

Thank you very much for your effort on this, well appreciated

The CBs for training the riding skill only recently became packaged with HB, so I haven't had a chance to throw that logic into the profile yet - it is on the way though. As for attacking low level mobs, that's an HB issue - but you're in luck because lofi's CombatHelper plugin has a good target filter that should be exactly what you need. Check it out here: http://www.thebuddyforum.com/honorb...er-targeting-pulling-raf-stability-fixes.html

 

[chemical]

Finally a profile that actually ran over night. Started last night around level 39 . Currently level 46. My only question is what needs to be changed so my toon sells everything in his bags. I dont care about selling anything at these low levels in auction house. Just hate to come back hours later to see my guy at a vendor for the past 2 hours also I'm using kicks cb"s and it runs fine

Sent from my SAMSUNG-SGH-I897 using Tapatalk

 

[benkoren]

Finally a profile that actually ran over night. Started last night around level 39 . Currently level 46. My only question is what needs to be changed so my toon sells everything in his bags. I dont care about selling anything at these low levels in auction house. Just hate to come back hours later to see my guy at a vendor for the past 2 hours also I'm using kicks cb"s and it runs fine

Sent from my SAMSUNG-SGH-I897 using Tapatalk

Use this:

<SellGrey>True</SellGrey>
<SellWhite>True</SellWhite>
<SellGreen>True</SellGreen>
<SellBlue>True</SellBlue>
<SellPurple>False</SellPurple>

- Ben

 

[Zajphin]

Hey, I started it in orgrimmar on my 24 priest and it walks to the vendor "Moving to Type: Buy, Name: Grimtak" and when im there it sais: "Activity: Loading Tile/s - POI: Type: Buy, Name: Grimtak"

Anyone know whats wrong? been standing here for 10minutes now.

Tnx.