What's new
By:
  • Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • Visit Resources
  • Visit Downloads
  • Visit Portal

[H - Grind] 68-80 in Borean Tundra, Dragonblight and Sholazar

Status
Not open for further replies.
Everytime I die in Borean my ghost run is unsuccessful, ie My toon runs into the mountain right behind the graveyard and is unable to get back on track and to the body.
 
I cleaned up the GY that people are having issues with. Now I don't know if I borked anything else in the mesh when I did this so keep an eye on it.
 

Attachments

hey everybody
i need help. If i use any profile with my warlock, comes
This profile does not contain any profiles fitting the character!

My lock is 69

whats the problem, please help!

excuse my english i know it isn?t good ;)
 
doesn't repair at warsong hold and my character is in full red.
 
Last edited:
Can someone help me figure out where to start this profile? It's been 45 minutes since I landed in warsong hold, and I still can't get it to work. I'm loading the mesh and horde northrend. I went directly out of the exit from the zepplin as well and went down the road like everyone said. Still no luck.

nvm figured it out. Take the staircase area down all the way to the road. Follow that road until you hit the gates way down the road...
 
Last edited:
Btw, figured out the repair vendor at warsong problem. Here's what I updated in the xml - take note of the Vendor Portion

<SubProfile>
<Name>Bloodspore Plain</Name>
<MinLevel>66</MinLevel>
<MaxLevel>71</MaxLevel>
<Factions>1985</Factions>
<Vendors>
<Vendor Name="Armorer Orkuruk" Entry="25274" Type="Repair" X="2768.669" Y="6211.37" Z="83.46343" />
</Vendors>
<Mailboxes>
<Mailbox X="3459.186" Y="4130.619" Z="15.28576" />
</Mailboxes>
<Hotspots>
<Hotspot X="2408.206" Y="5620.488" Z="46.77835" />
<Hotspot X="3002.968" Y="5610.64" Z="52.58111" />
<Hotspot X="2577.248" Y="5550.208" Z="34.89272" />
<Hotspot X="2701.512" Y="5556.515" Z="45.14606" />
<Hotspot X="2850.163" Y="5600.185" Z="51.12137" />

</Hotspots>
</SubProfile>

I did some meshing around the vendor as well just incase, was simple enough.
 
kagedmaniak said:
Btw, figured out the repair vendor at warsong problem. Here's what I updated in the xml - take note of the Vendor Portion

<SubProfile>
<Name>Bloodspore Plain</Name>
<MinLevel>66</MinLevel>
<MaxLevel>71</MaxLevel>
<Factions>1985</Factions>
<Vendors>
<Vendor Name="Armorer Orkuruk" Entry="25274" Type="Repair" X="2768.669" Y="6211.37" Z="83.46343" />
</Vendors>
<Mailboxes>
<Mailbox X="3459.186" Y="4130.619" Z="15.28576" />
</Mailboxes>
<Hotspots>
<Hotspot X="2408.206" Y="5620.488" Z="46.77835" />
<Hotspot X="3002.968" Y="5610.64" Z="52.58111" />
<Hotspot X="2577.248" Y="5550.208" Z="34.89272" />
<Hotspot X="2701.512" Y="5556.515" Z="45.14606" />
<Hotspot X="2850.163" Y="5600.185" Z="51.12137" />

</Hotspots>
</SubProfile>

I did some meshing around the vendor as well just incase, was simple enough.
Click to expand...

Would you mind reuploading this in a complete file? (just so I dont fuck it up) I needed to stop my bot farming northrend because it couldnt repair :/ so now its just farming firefly which was the only thing I could manage to fix using logmein.com (So slow updaterate)
 
Last edited:
There is an issue with the GY in SHolazar Basin
As when u spawn as a ghost u cant move
the bot doesnt mve
I need to move few yds forward then it starts moving to the corpse
how can u edit mesh ?
 
Works great, been going nonstop from 68-76. Only problem i had, that it doesnt repair at Warsong Hold, but thats the only problem i've ever had with this one! Works great with AV mix!
 
Mech0z said:
Would you mind reuploading this in a complete file? (just so I dont fuck it up) I needed to stop my bot farming northrend because it couldnt repair :/ so now its just farming firefly which was the only thing I could manage to fix using logmein.com (So slow updaterate)
Click to expand...

Here ya go. You will need to change the items to your liking though [mail, keep, etc]. You may need to do extra meshing, not sure, but I attached my mesh also.
 

Attachments

Has worked amazing for me so far.. I've leveled 3 toons 68-75 with this profile.. I usually send the toons to Zuldrak after 75, but as far as prior to that it has worked great.. I just don't like scholozar basin too much.
 
Around this location: <Hotspot X="3095.122" Y="4372.215" Z="28.09609" />

There are a bunch of ice chunks in this small pond that my guy gets stuck in (lvl 72 area). he keeps trying to jump out and move around yet he is completely stuck and I have to fix it myself. May want to avoid this area.
 
Where to start :P When i start the bot outside of warsong it keeps running into the building :S
 
My char keep moving into the wall tryd most of the things(move a bit out/or a bit in, all around warsong hold)and nothing, still wants to go inside the wall or inside warsong.. what im i doing wrong?

Got it to work now but when it dies the GY patch is getting stuck and so
 
Last edited:
Here is a slightly modified version, i've used it all the way from 68 to 80 and all the small issues should be fixed.
 

Attachments

did any one fix the ghost waypoints for running back at warsong as I always get stuck at a wall...
 
Not sure if anyone else is having the same problems as me, but when I run the profile there is this backing up thing that keeps happening. Not sure if it is suppose to do that or not. Also, sometimes my character just stops and gets killed by mobs and does nothing but release and get stuck near the graveyard.
 
last two posters if you RTFM you could fix your problems in less time that it took to post on here.
 
I actually did read the manual, so if you do not have any positive input do not post please. I also think its me trying to levelbot a mage. The profiles and meshes work perfectly fine for my warrior but I guess it doesn't like my mage.
 
Status
Not open for further replies.
Back
Top