[PAID] GarrisonButler

[deams]

Man, i don't want to kiss you anymore, I'm gonna suck your ...finger...

Just set up with HBrelog and it's working flawlessly (minus some reported bugs [like the anvil thing])
the option to kill the process works well so far

and if I may, I would like to suggest a feature: to use blingtron 4k or 5k if it`s available


and really THANK YOU for this, this is amazing

(and sorry for my english, isn`t my 1st language)

Well... how to say it... let's keep it platonic!
One thing you can do is next time I drop by Brazil, you'll invite me for dinner.

Good idea, feature added to the list!

 

[deams]

big thanks to you and your work!!!!

on Rev. 24 find a Bug:
on 2 Chars in mine lvl. 3 on hevesting the radius to the nodes is to smal, so he forget it, go to the next work, but do not ignore them, so the bot wants go to the next work on half way he registrated that he has forget these nodes an will run back, at the middle way he wants to go to next work and again and again.

sy for bad english.

thx for the perfect work

Can you write it again in your own language?
Because to be honest, this is just painful to read, but thanks for trying!

 

[deams]

Thank you very much for the new release. Especially sometimes it would bug not opening the work order frame and stand doing nothing but i realized that you fixed that as well by moving a bit then coming back to open it. Amazing work.

Just curious, not a big deal tough but, even tough i selected my daily cds, is there a problem not to operate properly about them? After loading the .7 version, my bot does not seem to be doing the daily CDs.

Thank you.

Hey, delete all settings files of garrisonbuddy everywhere you can find one. Should work fine afterward

idears (not sure if all are possible in a botbase):

option for logout maybe even waiting area (if you log in for mission i.e. for some seconds, and gb just once a day)
buffing: -> aspect of the cheeta for hunter / unholy pres on dk / ghostwolf as shamen(works in mine and garden) / outside mine / herb gathering druid
minor thing: use [Armor Enhancement Token]
sell just grey items after salvage ((+if its possible all "new" armor pieces below itemlvl x)

i think sending ores to char xy and another for herbs, boe items and so on have already be mentioned by someone else


offtopic:
is there a addon with a small gui which shows me when missions are finished (for all chars on the account on every char)

Thanks for the requests, added to the list too!
Although the speed buffs are definitely not at the top of the priority list.

Amazing work as always, just noticed for my Enchanter it did all the enchanting work orders before doing the Enchanting cooldowns, so all my mats were used up. Any chance it could prioritize Profession cooldowns > work orders?

Custom tasks prioritization is currently being processed in my mind...
Searching for the right implementation for the future.

So tryed it out with a toon Today Works all fine at this point!
Log atached for maybe Troubleshooting.
Love the new UI! Doing missions is something i take care of.
So the bot does for me all what i wanted

That's sweet!
Enjoy then

 

[deams]

Wow, this is working great!!

Welcome!

big thanks to you and your work!!!!

on Rev. 24 find a Bug:
on 2 Chars in mine lvl. 3 on hevesting the radius to the nodes is to smal, so he forget it, go to the next work, but do not ignore them, so the bot wants go to the next work on half way he registrated that he has forget these nodes an will run back, at the middle way he wants to go to next work and again and again.

sy for bad english.

thx for the perfect work

Double post? check my answer above

Can't get it to relog, but HBRelog has been setup :s Could anyone make a short quick guide how to make it work out?

I think one has been posted now, if not send me a PM and I'll add it.

It cannot connect to the svn if there is error in the svn in the browser. because my profile is clearly not working becaus of this

Please read the first page carefully.

 

[deams]

Go to your honorbuddy/settings/realmname/character folder. You should see a GarrissonBuddy settings xml file

Thanks for helping here!

edit: nvm

No problem Damn I'm curious now...

 

[deams]

View attachment 158750

Hi Having problem with my install structure maybe, :C/Games/Honorbuddy/Bots/GarrisonBuddyBeta

Bot does not show up in my Bot List. Any help?

Do you have : C:/Games/Honorbuddy/Bots/GarrisonBuddyBeta/GarrisonBuddy.cs ?
Can you post a log please, see first page for detailed instructions.

Great work deams!

Quick question... How difficult would it be to have the bot check for the Piper's Buried Supplies? I have only just now found them, so I 'm not sure if they ever return or if they are a one time thing, but it might be handy to have them collected either way.

Thanks again!

Already on the to do list!

 

[deams]

OMG....The new revision (I think its 24) has fixed every problem I had, even the pathing stuff. It is running perfectly on all 5 of my toons. Great job bro....;

Good to hear! Keep supporting the project if you want even more features!

 

[Kafta]

you have to activate the HBRelog Plugin, Then Config:
Fill in all Data to Log in 1st Char
1. Wait for 60 min 15 rdm
2. Ilde for 2 min 1 rdm
3. Logon - new Char
4. Wait for 60 min 15 rdm.
.
.
.
.

If you activate the HBRelog option, and chars work is done, he ilde for 1-3 min automaticly and starts next char and next and next ....

If ther is a Problem and it does nit function, he logt after 60 min out, so you als can set it at 30 but if the time for the regular worke its to short he is not ready with work.

Thank you sir

 

[leoff]

on Rev. 24 find a Bug:
on 2 Chars in mine lvl. 3 on hevesting the radius to the nodes is to smal, so he forget it, go to the next work, but do not ignore them, so the bot wants go to the next work on half way he registrated that he has forget these nodes an will run back, at the middle way he wants to go to next work and again and again.

Welcome!
Double post? check my answer above

Deams, this also happened to me. Both times it "ignored" the nodes near the water.

Horde, Garrison 3, Mine 3.
1. Bot goes down the mine to harvest ore.

2. It goes inside the mine shaft that leads to the water nodes.
Both times, when it harvested the node in the shaft, a mob spawned. Not sure if this is the trigger - but could be.
After killing the mob, instead of moving forward and harvesting the nodes near the water, it turns around and finishes mining the other nodes.

3. Bot runs back and exits the mine. When it gets near the garden, it "sees" the nodes missed near the water.

4. Bot decides to go back and mine the nodes near the water.

5. Gets inside the mine, doesn't even reach the stairs, and thinks there are no more nodes in the mine.

6. Go back to #3.

When it happens again, I'll try to have a log.

 

[Dr Jackall]

Hey thanks for passing by!
It is an idea, adding to the list. Would you also like the bot to mail your items directly? would be faster

IT WOULD BE AWESOME!!! O_O
Maybe having a filter to decide what to mail and what not by adding the item name!

 

[deams]

Deams, this also happened to me. Both times it "ignored" the nodes near the water.

Horde, Garrison 3, Mine 3.
1. Bot goes down the mine to harvest ore.

2. It goes inside the mine shaft that leads to the water nodes.
Both times, when it harvested the node in the shaft, a mob spawned. Not sure if this is the trigger - but could be.
After killing the mob, instead of moving forward and harvesting the nodes near the water, it turns around and finishes mining the other nodes.

3. Bot runs back and exits the mine. When it gets near the garden, it "sees" the nodes missed near the water.

4. Bot decides to go back and mine the nodes near the water.

5. Gets inside the mine, doesn't even reach the stairs, and thinks there are no more nodes in the mine.

6. Go back to #3.

When it happens again, I'll try to have a log.

Alright now I see the problem! Thanks for the precisions.
The log would help
Adding to bug list!

 

[deams]

IT WOULD BE AWESOME!!! O_O
Maybe having a filter to decide what to mail and what not by adding the item name!

Yeah that's kinda what I had in mind, plus small features that would make it even easier. Should be communicating more on it soon.

 

[sacoplastico]

[GarrisonBuddy] 0.7.0: [Time] TICK: 00:00:00
[GarrisonBuddy] 0.7.0: Id: 28, PlotId: 23, BuildingLevel: nil, Name: Barracks, Rank: 3, IsBuilding: False, TimeStart: 1417952545, BuildTime: 3600, CanActivate: False, CanUpgrade: nil, IsPrebuilt: false, NameShipment: nil, ShipmentCapacity: 0, ShipmentsReady: 0, ShipmentsTotal: 0, CreationTime: nil, Duration: nil, ItemName: nil, ItemQuality: nil, ItemId: nil
[GarrisonBuddy] 0.7.0: [ShipmentStart] No shipment left to start: Barracks
[GarrisonBuddy] 0.7.0: Id: 28, PlotId: 23, BuildingLevel: nil, Name: Barracks, Rank: 3, IsBuilding: False, TimeStart: 1417952545, BuildTime: 3600, CanActivate: False, CanUpgrade: nil, IsPrebuilt: false, NameShipment: nil, ShipmentCapacity: 0, ShipmentsReady: 0, ShipmentsTotal: 0, CreationTime: nil, Duration: nil, ItemName: nil, ItemQuality: nil, ItemId: nil
[GarrisonBuddy] 0.7.0: [ShipmentPickUp] No shipment left to pickup: Barracks
[GarrisonBuddy] 0.7.0: Id: 132, PlotId: 18, BuildingLevel: nil, Name: Gem Boutique, Rank: 3, IsBuilding: False, TimeStart: 1417952428, BuildTime: 3600, CanActivate: False, CanUpgrade: nil, IsPrebuilt: false, NameShipment: Gem Boutique, ShipmentCapacity: 21, ShipmentsReady: 0, ShipmentsTotal: 17, CreationTime: 1418885365, Duration: 14400, ItemName: Taladite Crystal, ItemQuality: 2, ItemId: 115524
[GarrisonBuddy] 0.7.0: [ShipmentStart] In Bags Taladite Crystal - #57
[GarrisonBuddy] 0.7.0: [ShipmentStart] In Bank Taladite Crystal - #94
[GarrisonBuddy] 0.7.0: [ShipmentStart] Total found 115524 - #151 - needed #5 - True
[GarrisonBuddy] 0.7.0: [ShipmentStart] Found 21 new work orders to start: Gem Boutique
[GarrisonBuddy] 0.7.0: Id: 132, PlotId: 18, BuildingLevel: nil, Name: Gem Boutique, Rank: 3, IsBuilding: False, TimeStart: 1417952428, BuildTime: 3600, CanActivate: False, CanUpgrade: nil, IsPrebuilt: false, NameShipment: Gem Boutique, ShipmentCapacity: 21, ShipmentsReady: 0, ShipmentsTotal: 17, CreationTime: 1418885365, Duration: 14400, ItemName: Taladite Crystal, ItemQuality: 2, ItemId: 115524
[GarrisonBuddy] 0.7.0: [ShipmentPickUp] No shipment left to pickup: Gem Boutique
[GarrisonBuddy] 0.7.0: [ShipmentStart] Could not find unit (79830), moving to default location.
If this message is spammed, please post the ID of the PNJ for your work orders on the forum post of Garrison Buddy!

I don't really understand these logs but either the bot thinks the default location of the Jewelcrafting NPC (79830) is the Garden or the Garden NPC has the wrong id (should be 85783)

 

[deams]

I don't really understand these logs but either the bot thinks the default location of the Jewelcrafting NPC (79830) is the Garden or the Garden NPC has the wrong id (should be 85783)

Perfect sir, both were wrong due to an awful copy/paste. Won't let myself get tempted again... and of course will be fixed in the next release!

 

[Zicoth]

No idea if it was reported yet, my bots not refreshing trading post que.

 

[deams]

No idea if it was reported yet, my bots not refreshing trading post que.

Yeah it was, check the first page updated the features list.

 

[Mascoba]

In tannery i had no leather in bags to start work order, but bot keep trying to start work order again and again.

 

[leoff]

I have a level 3 mine and a level 3 horde garrison.

Went into mine, mined almost everything, went outside.
Went back inside the mine the few it misesed on the way out.
Went out to set work orders, picked up work orders, then set more cause it got more free space.

Got a little lost, but finally made it to the herb garden.
Collected 1 herb, ran to mine
Ran back to garden.
collected 1 more herb, ran back to mine
ran back to garden

Then i just shut it off. Went into my mines, found two ores and 1 cart.

View attachment 158628

Deams, this log may have the problem I described (and Banana's).
It looks a lot like what my bot did.

 

[deams]

In tannery i had no leather in bags to start work order, but bot keep trying to start work order again and again.

Coule you post the log please?

 

[deams]

Deams, this log may have the problem I described (and Banana's).
It looks a lot like what my bot did.

Alright, I see what needs to be fixed.