What's new
By:
  • Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • Visit Resources
  • Visit Downloads
  • Visit Portal
RebornBuddy Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

[PAID] GarrisonButler

CalifRHCP said:
This is getting stuck consistently for me on the garrison mission table. It goes in to try to complete/start missions but it just runs into the table. This is for Horde Garrison tier 2 and 3. I have to hit spacebar to get it to jump ON TOP of the table, then it works.
Click to expand...
Thanks, will add it to the "To fix list" for the next build!

wikki74 said:
Fantastic, runs without any problem now :)

One thing, it does no workorder at trading post and i see no possibility in the menu to activate?
Click to expand...

This is intended, since some people might not want to spend all of one type of herb or more it was deactivated.
It will be reactivated soon with an option to deactivate specific reagents from being spent! :)
 
xps88 said:
I had a similar issue yesterday but after a while it picked them up.

On a good note, good work Deams!
Click to expand...

Thanks :)
Even if it does the job after a while, this is not an intended behavior!
As soon as the bot enters the mine, it shouldn't leave unless there's no node detected at all ( Unless Blizz decides to give you a special gift with nodes outside :dream ).
So feel free to post a full log so that I can fix this asap. :)
 
Last edited:
This bot gets better and better. Nice work, mate.
Found a couple of issues though.
Looks like it checks for a wrong item for tailoring work orders. Now it checks for 111556 (Hexweave Cloth), but it should be checking for 111557 (Sumptuous Fur) in order to place work orders.
Also, my blacksmith toon was trying to do some smithing dailes when standing at a mission table and it couldn't locate the anvil. I think it would be a good idea to go to a garrison center or to the proff buildings before trying to do the crafting.
 
LordKuper said:
This bot gets better and better. Nice work, mate.
Found a couple of issues though.
Looks like it checks for a wrong item for tailoring work orders. Now it checks for 111556 (Hexweave Cloth), but it should be checking for 111557 (Sumptuous Fur) in order to place work orders.
Also, my blacksmith toon was trying to do some smithing dailes when standing at a mission table and it couldn't locate the anvil. I think it would be a good idea to go to a garrison center or to the proff buildings before trying to do the crafting.
Click to expand...

Hey!
Please post a full log! :)
The bot is supposed to auto detect the safest anvil to move to and go there.
Only once it is at destination it should start casting the CD spell!
Which means something went wrong in between... ;)
 
New build running great for me, nice work.

Any clue when advanced follower mission logic (completion % and mission lvl priority etc) will be implemented? This is the thing I'm looking for the most in this botbase.

They've changed the rewards from salvage yard for lower level missions so competing lv90 etc missions with lv100 followers isn't as valuable anymore.
 
Potringo445 said:
New build running great for me, nice work.

Any clue when advanced follower mission logic (completion % and mission lvl priority etc) will be implemented? This is the thing I'm looking for the most in this botbase.

They've changed the rewards from salvage yard for lower level missions so competing lv90 etc missions with lv100 followers isn't as valuable anymore.
Click to expand...

Code is already being written... ;)
The base seems more and more stable, it still need a few tweaks and fixes and it'll be ready for the next phase.
I can't give you a precise date since I don't want to make you false promises, but you shouldn't wait for long as soon as bugs are not raining over this thread anymore!
 
Here is the full log. You can see the issue starting at 07:34:03.930. Around 07:34:32.867 I moved the toon manually to the center of the garrison and it was able to generate the path.
 

Attachments

Works better now, but there are still some issues.
Bot uses coffee and mining pick on its cooldown even if he has those buffs.
Don't know why but he doesn't want to make some of my daily proffessions routine, checked it on 4 toons.
On loading tiles it runs in circles like mad instead of standing in 1 place...

View attachment 4048 2014-12-10 13.35.txt
 
Actually, I think using the coffe on cooldown is not a bad idea. The buffs stack and you will probably have more coffe than you need anyway.
 
Niggadjai said:
Works better now, but there are still some issues.
Bot uses coffee and mining pick on its cooldown even if he has those buffs.
Don't know why but he doesn't want to make some of my daily proffessions routine, checked it on 4 toons.
On loading tiles it runs in circles like mad instead of standing in 1 place...

View attachment 157301
Click to expand...

Hey,
Of course it does!
The coffee and mining are there to be used, so if it can use them more than once to be faster, it will.
Or you would you prefer for the bot to keep the coffee and the mining picks and just use one per run?
But maybe this is not what you meant? :)
 
the mining pick doesn't stack the buff so maybe it's not useful this way.
ps: sry for my bad English :)
 
Niggadjai said:
the mining pick doesn't stack the buff so maybe it's not useful this way.
ps: sry for my bad English :)
Click to expand...
You're right for the mining pick! :)
I chose to make it use it on CD also because it was using useless space in my bags everyday, but if more people find this behavior unpleasant, I'll switch it!
 
deams said:
You're right for the mining pick! :)
I chose to make it use it on CD also because it was using useless space in my bags everyday, but if more people find this behavior unpleasant, I'll switch it!
Click to expand...

I think both Coffee and Mining Pick are UNIQUE (5), so its better to use them all (or remove from bags after the run), bcs if u already have 5 in your bag the bot will get stuck at looting the veins/carts..

And some suggestions/questions:

If Collecting Shipments is set to true, will it collect all available shipments or only those buildings u have also set to true?
(I think it would be better if it would ignore those building that were set to false.)

I also noticed some of my human chars (which are tall) get stuck at entrance to Alliance Town Hall lvl 2 when they are on a raptor mount.
Is the bot using the unstuck handler from HB, bcs they were running in place for some minutes before i dismounted them.

Keep up the nice work.
 
Last edited:
In today's run I noticed that you have the Barracks but not the TradingPost in the Work Orders section. Why is that? AFAIK there are no work orders in the Barracks, but there are in the TradingPost.
 
Kmica said:
I also noticed some of my human chars (which are tall) get stuck at entrance to Alliance Town Hall lvl 2 when they are on a raptor mount.
Is the bot using the unstuck handler from HB, bcs they were running in place for some minutes before i dismounted them.
Click to expand...

Also noticed thats, just set use some small mount in bot settings. Personally did set to horde bike, no problems at all.
 
I've been having this running in Mixed Mode for a few days alongside AutoAngler2, but when it gets triggered on the switch timer (I have it at 30 minutes) it just says this:

Code: 
[GarrisonBuddy] 0.6.4: Refreshing Buildings and shipments databases.
Switching bot to GarrisonBuddy
AutoAngler 2.135: Equipping weapons
AutoAngler 2.135: In 0 days, 0 hours and 29 minutes we have caught
..snip..
Vendor mount could not be summoned, blacklisting current location for mount up.
Switching bot to AutoAngler
AutoAngler 2.135: Equipping Fishing Pole

It doesn't actually run any of the routines but if I run it by itself it works fine.

If I don't have enough resources to fill out my work orders, it gets stuck:

Code: 
[GarrisonBuddy] 0.6.4: [ShipmentStart] Moving to start work order:Gem Boutique
[GarrisonBuddy] 0.6.4: [ShipmentStart] Work order frame opened.
[GarrisonBuddy] 0.6.4: Refreshing Buildings and shipments databases.
[GarrisonBuddy] 0.6.4: [ShipmentStart] Moving to start work order:Gem Boutique
[GarrisonBuddy] 0.6.4: [ShipmentStart] Work order frame opened.
[GarrisonBuddy] 0.6.4: Refreshing Buildings and shipments databases.
[GarrisonBuddy] 0.6.4: [ShipmentStart] Moving to start work order:Gem Boutique
[GarrisonBuddy] 0.6.4: [ShipmentStart] Work order frame opened.
[GarrisonBuddy] 0.6.4: Refreshing Buildings and shipments databases.
[GarrisonBuddy] 0.6.4: [ShipmentStart] Moving to start work order:Gem Boutique
[GarrisonBuddy] 0.6.4: [ShipmentStart] Work order frame opened.
[GarrisonBuddy] 0.6.4: Refreshing Buildings and shipments databases.
[GarrisonBuddy] 0.6.4: [ShipmentStart] Moving to start work order:Gem Boutique
[GarrisonBuddy] 0.6.4: [ShipmentStart] Work order frame opened.
[GarrisonBuddy] 0.6.4: Refreshing Buildings and shipments databases.
[GarrisonBuddy] 0.6.4: [ShipmentStart] Moving to start work order:Gem Boutique
[GarrisonBuddy] 0.6.4: [ShipmentStart] Work order frame opened.
[GarrisonBuddy] 0.6.4: Refreshing Buildings and shipments databases.
[GarrisonBuddy] 0.6.4: [ShipmentStart] Moving to start work order:Gem Boutique
[GarrisonBuddy] 0.6.4: [ShipmentStart] Work order frame opened.
[GarrisonBuddy] 0.6.4: Refreshing Buildings and shipments databases.
[GarrisonBuddy] 0.6.4: [ShipmentStart] Moving to start work order:Gem Boutique
[GarrisonBuddy] 0.6.4: [ShipmentStart] Work order frame opened.
[GarrisonBuddy] 0.6.4: Refreshing Buildings and shipments databases.
[GarrisonBuddy] 0.6.4: [ShipmentStart] Moving to start work order:Gem Boutique
[GarrisonBuddy] 0.6.4: [ShipmentStart] Work order frame opened.
[GarrisonBuddy] 0.6.4: Refreshing Buildings and shipments databases.
[GarrisonBuddy] 0.6.4: [ShipmentStart] Moving to start work order:Gem Boutique
[GarrisonBuddy] 0.6.4: [ShipmentStart] Work order frame opened.
[GarrisonBuddy] 0.6.4: Refreshing Buildings and shipments databases.
[GarrisonBuddy] 0.6.4: [ShipmentStart] Moving to start work order:Gem Boutique
[GarrisonBuddy] 0.6.4: [ShipmentStart] Work order frame opened.
[GarrisonBuddy] 0.6.4: Refreshing Buildings and shipments databases.
[GarrisonBuddy] 0.6.4: [ShipmentStart] Moving to start work order:Gem Boutique

I have the Tailoring Emporium, but it's not setting the work orders for it. It loads my profession daily CDs, but doesn't do them.
 
Last edited:
Instead of doing things in turns such as collect mine, collect garden, do alchemy etc.
To feel more of a human you should have shipment and workorders as a extent of that action.

For example:

1) I went to mine first
2) Then I pickup mine shipments
3) Then I start mine work orders
4) Now I went to garden
5) Then I pickup mine shipments
6) Then I start mine work orders

And so forth for all other buildings when interacting with it.

With my last run it did:

1) mine
2) garden
3) back to mine for shipment
4) didn't set work orders
5) went to garden for shipment
6) didn't set work orders

Since servers went down I couldn't further test other accounts to see if they have the same behaviors when the servers come back I will check everything again before posting the log.
 
You must log in or register to reply here.
Back
Top