[PAID] GarrisonButler

[blablub]

Anyone having problems with hb freezing when using it with hbrelog? Have to finish process manually btw, thanks!

make sure you have the profile set to a blank profile (first char and in every logon task) in hb relog, and i don´t mean leaving the field empty / blank.
"some" pages ago i even linked a thread where you can get a "blank profile" if you don´t got one already.

i hope it helps otherwise feel free to ask me again.

 

[Boomer]

found this is your log

[09:20:41.175 N] Wow exited, Honorbuddy stopped!
[09:20:41.175 Q] Bot stopping! Reason: Wow exited, Honorbuddy stopped!
[09:20:41.175 N] Honorbuddy terminating in 20 seconds.
[09:20:54.329 N] (Singular) (Singular) info: 208.0 seconds since BotBase last called Singular (now in OnBotStopped)
[09:20:54.318 D] GreyMagic.InjectionDesyncException: [B]Process must have frozen or gotten out of sync: Injection Finished Event was never fired[/B]
   at GreyMagic.Executor.WaitForInjection(Int32 timeout)
  ...

the bold part, from my experience has to do with framelock, do u have it enabled? its been mentioned multiple times on this tread[/QUOTE]


Tried running without framelock enabled. First with no work order processing. Did not crash. Then, enabled work orders, hasn't crashed so far.
I failed to read anything about enabling or disabling framelock but then again, with over 300 pages...lol thanks for the help. Hoping that solves the crashing.

 

[highboi]

Tried running without framelock enabled. First with no work order processing. Did not crash. Then, enabled work orders, hasn't crashed so far.
I failed to read anything about enabling or disabling framelock but then again, with over 300 pages...lol thanks for the help. Hoping that solves the crashing.

it doesnt hurt to read previous posts, its just lazyness. im not singling you out boomer, alot of people come here with issues when the solution is sometimes 2 posts above theirs

if you have an issue, i promise you someone else might have that same issue. (like the crashes you have)
and if no one else has the same issue as you, then the problem isnt the bot, its your computer (needing IE 11)

 

[shelaine]

Anyone having problems with hb freezing when using it with hbrelog? Have to finish process manually btw, thanks!

Yep. Game freezes or disconnects me, but I don't use hbrelog.

First freeze was after 2 minutes in the mine while mining. Tried to start over again, got disconnected with a WoW Error Message. I already made a thread, please see:

https://www.thebuddyforum.com/honorbuddy-forum/210351-disconnects-freeze-error.html#post1914054 I described the WoW error message in there as well.

I thought it was a general thing, but I'm starting to believe this is a garrison butler only issue. Started another plugin a few minutes ago and it's working fine so far.

 

[blablub]

Yep. Game freezes or disconnects me, but I don't use hbrelog.

First freeze was after 2 minutes in the mine while mining. Tried to start over again, got disconnected with a WoW Error Message. I already made a thread, please see:

https://www.thebuddyforum.com/honorbuddy-forum/210351-disconnects-freeze-error.html#post1914054 I described the WoW error message in there as well.

I thought it was a general thing, but I'm starting to believe this is a garrison butler only issue. Started another plugin a few minutes ago and it's working fine so far.

- like i said, when you use hb relog you have to use a blank profile since some hb version, otherwise you have all really high chance of getting hb stuck / freeze (last message is usally no profile found or something like that in hb screen / log)
should be mentioned in #2 + the old "thing" that botbase should be garrisonbutler ICE or lite not just gb (not sure if its autocompleting then i haven´t said anything)

- if config won´t work -> install Internet Explorer 11 (someone told me in a pm that even installing IE 10 helped -> not sure whats the lastest version for windows 7)

- for other problems some people reported that setting framelock to 30 tps helped (had no problems with 15 / 60 tps

- if the bot won´t fight normaly make sure facing and auto movement is enabled in the cc, some people said that thier spec is broken in sigular and switching to tuanhas free helped

- make sure you don´t have any non default plugins running like timber....


i think these points cover over 95% of the problems

 

[deams]

- like i said, when you use hb relog you have to use a blank profile since some hb version, otherwise you have all really high chance of getting hb stuck / freeze (last message is usally no profile found or something like that in hb screen / log)
should be mentioned in #2 + the old "thing" that botbase should be garrisonbutler ICE or lite not just gb (not sure if its autocompleting then i haven´t said anything)

- if config won´t work -> install Internet Explorer 11 (someone told me in a pm that even installing IE 10 helped -> not sure whats the lastest version for windows 7)

- for other problems some people reported that setting framelock to 30 tps helped (had no problems with 15 / 60 tps

- if the bot won´t fight normaly make sure facing and auto movement is enabled in the cc, some people said that thier spec is broken in sigular and switching to tuanhas free helped

- make sure you don´t have any non default plugins running like timber....


i think these points cover over 95% of the problems

Gonna quote your post on the first page!

 

[blablub]

Gonna quote your post on the first page!

you can also take just parts of it, i don´t need credit.
most things where figured out by someone else anyways.

 

[deams]

Yep. Game freezes or disconnects me, but I don't use hbrelog.

First freeze was after 2 minutes in the mine while mining. Tried to start over again, got disconnected with a WoW Error Message. I already made a thread, please see:

https://www.thebuddyforum.com/honorbuddy-forum/210351-disconnects-freeze-error.html#post1914054 I described the WoW error message in there as well.

I thought it was a general thing, but I'm starting to believe this is a garrison butler only issue. Started another plugin a few minutes ago and it's working fine so far.

It is possible
The butler is not a simple bot and becomes to be as complex as ProfessionBuddy for example, so there might be something going on with your setup.

For everyone having recurrent problem as this one, feel free to add me on Skype. This speed up the resolution process quite a bit!

 

[Boomer]

it doesnt hurt to read previous posts, its just lazyness. im not singling you out boomer, alot of people come here with issues when the solution is sometimes 2 posts above theirs

if you have an issue, i promise you someone else might have that same issue. (like the crashes you have)
and if no one else has the same issue as you, then the problem isnt the bot, its your computer (needing IE 11)

Thanks for the info.
I wouldn't call not finding a part about framelock in over 300 pages of posts lazyness however. I've been reading this thread for months and missed it. If it is that important to the function of this botbase then it should be front and center. I agree in main point, however, that reading the posts should be done before just complaining.

 

[Boomer]

Hi Boomer,
Could you add me on Skype? (icon below my nickname)
I would like to test with you the current beta, see if it fixes your problem.
If not we can workout the solution live.

Thanks. Sent you a PM.

 

[Immortalus]

Is there a resolution for the character getting stuck on the herb garden? I have framelock enabled and TPS set to 30 but the character still gets stuck and the only way is to stop and start HB again.

 

[highboi]

Is there a resolution for the character getting stuck on the herb garden? I have framelock enabled and TPS set to 30 but the character still gets stuck and the only way is to stop and start HB again.

got a log?
if previous solutions didnt work, chances are your issue is different...

 

[chasemay]

WHEN will trading post be fixed??? Come on Deams...

 

[Trixiap]

Is there anyway, how to return to old UI? Because new UI isn´t usable on my botting PC (probably due to low HW spec). New UI have like 10-15sec response to actions.

 

[paulmuadip]

Is there anyway, how to return to old UI? Because new UI isn´t usable on my botting PC (probably due to low HW spec). New UI have like 10-15sec response to actions.

they are working on UI improvements -

no one can do anything for your weak PC... if you having troubles with loading of the UI - dont load it... change your wished settings directly in the Config file.... no matter what you changing be carefull.. .

regards

 

[fsacrifice]

Thanks for the quick reply! before raising my TPS to 30 stopping and starting did nothing, now it does resolve the issue but after each collect point the issue occurs and requires me to stop and start. This is annoying when I have 7 garrisons and I have to continue to monitor the bot. Any idea why i'm getting these below errors to begin with? the below is just the herb gather but it does with with mine and professions as well. Let me know if you want a full Garrison log of me starting and stopping the bot.

[GarrisonButler Lite] 2.4.20.0: [ShipmentStart,137] Cannot collect shipments due to reaching max tries (5): Herb Garden
[GarrisonButler Lite] 2.4.20.0: [ShipmentStart,137] Cannot collect shipments due to reaching max tries (5): Herb Garden
[GarrisonButler Lite] 2.4.20.0: [ShipmentStart,137] Cannot collect shipments due to reaching max tries (5): Herb Garden
[GarrisonButler Lite] 2.4.20.0: [ShipmentStart,137] Cannot collect shipments due to reaching max tries (5): Herb Garden

Can we look at why this keeps happening to me please? I have 7 toons and having to stop and start every time it collects herbs/mine slows me down

View attachment HB Log Review.txt

 

[Boomer]

Crashing again. The disabling framelock didn't work for me today. Clean/fresh Hb install too. :-(

 

[highboi]

Crashing again. The disabling framelock didn't work for me today. Clean/fresh Hb install too. :-(

can u enable framelock and see if it works, if not disable it again and see if it works. framelock is funny like that. if it still doesnt work, PM me

 

[drakir]

Ok, I got a problem with the mission screen... I can't for the love of god get it to work so that the bot only starts BRF/Highmaul Missions on 95%

I have the followers all epic and all leveld up so that ain't the problem. Either i've configured GB faulty or just haven't understood the missionscreen.

Priority: 0
Name: PlayerGear
Category: PlayerGear
Disallowed: (Red)
Player Level: 0
Mission Level: 0
Custom Success Chance: 95% (Green)

These setting should prioritize BRF/Highmaul first and never let it go under Success Chance 95% right? Why does the bot send it away on less???

 

[highboi]

Ok, I got a problem with the mission screen... I can't for the love of god get it to work so that the bot only starts BRF/Highmaul Missions on 95%

I have the followers all epic and all leveld up so that ain't the problem. Either i've configured GB faulty or just haven't understood the missionscreen.

Priority: 0
Name: PlayerGear
Category: PlayerGear
Disallowed: (Red)
Player Level: 0
Mission Level: 0
Custom Success Chance: 95% (Green)

These setting should prioritize BRF/Highmaul first and never let it go under Success Chance 95% right? Why does the bot send it away on less???

After the bot places the mission, can you /reloadUI and confirm that the % shown is the acutal %