[PAID] GarrisonButler

[HBfanboy1980]

To suggest this would only be good for leveling is kind of absurd...it's 3 months into an expansion...we have no idea what kind of goodies are going to come from missions later on in the next year and a half, I'd prefer to always be full bore to benefit most from salvage boxes with BoEs, gold from inn missions, etc.

At most I could maybe concede that later on what'll it matter if you get 16 crafting mats vs 22 crafting mats per day...but still, who knows how important those can be by the last tier

I'm assuming you didn't really read what I wrote all the way through? I was responding the the idea about restructuring the order of things in order to always have followers in when looting work orders... then always have them for missions as well. There was already a ton of discussion about this, but ultimately min/maxing in this regard wasn't the intent and Blizzard said in a podcast interview they would adjust this at some point. Regardless though... if you make a separate install that does missions only and put it in a loop. You can complete all your missions almost everyday. The missions are RNG based on some set limitations that haven't been shared. You don't keep getting missions as fast as you can do them. I have two toons out of many that do every mission everyday with 20-21 followers. The rest of their followers are assigned to buildings all the time.

Also, something to be mentioned here that we are accepting as a given possibly. Maintaining a level 3 barracks should be a requirement for anyone hoping to maximize with missions and professions via the garrison.

 

[bobjoe123]

Would be nice if you fixed the part where the bot runs into the ledge of the door for 4-5 seconds on its way to the mission table for level 2 garrisons (possibly level 3 I don't know). Doesn't stop the bot working but if a gm spectated that it would be an instant ban.

 

[bobjoe123]

Thank you for saving me so much time with this, never had a single problem with it, worked like charm since day 1!
But one thing i am really missing and thought about at;
A option to do also mission with less than 100% would be nice!
I've botted my char to 100 and all my followers are damn underleveld. So I only do missions for gaining xp, which means missions with a duration of 30-120min and a >60% chance are definitly worth it! (have GarrisionICE scheduled to do missions every 2 hours to level the followers) I think I had bad luck with the stats and skills of my followers, so sometimes there is only 1 of alot mission with 100% and thats the only one the bot does.
I think a implemenation (like I dont know; "[CHECKBOX]Also start missions with less than 100%, minium chance: %") would be leveling the followers really faster.
Is something like that possible?

Greetz,
blue

How do you set hbrelog up to log in every 2 hours?

 

[HBfanboy1980]

How do you set hbrelog up to log in every 2 hours?

just add an idle command inside your HBRelog profile.

 

[myrgy]

just add an idle command inside your HBRelog profile.

I put an idle as the last task and it didn't seem to do anything. It just cycled to the first task without pausing.

 

[Engiguy]

I apologize in advance if this has already been addressed but... I just purchased this because its close to perfection IMO but im having a few issues...
1) My blacksmith hammer apparently got sold, idk how. But the problem was the botbase goes to my blacksmith hub in my garrison and just spams the HB window that it is trying to craft something... but it cant tell I dont have a hammer, so it just sits there doing nothing in reality but it thinks it is. Can you add something to check if you have the required tools for the profession, and if not, buy them? Simple white tools like skinning knife, bs hammer, etc, are sold inside the garrison.

2) I had to disable the herb harden because if im in the "bottom right" profession hub, the one that is closet.. my guy just gets stuck and trys to run through the walls non stop to get to the pretty flowers. You can see the collission system trying to fix it but it should know to go back and take the main road to the garden instead of trying to get the nearest flower by walking straight to it.

Also a general question... Does the mission starting feature here work similar to the WoW addon "masterplan?" I.e. does it choose both the highest chance of success and higher reward? Or does it just base it 100% chance to complete?

This is important because obviously i might get 1k xp or 20k xp depending on which follower it uses... or 70 vs 300+ garry resources if it chooses to use the scavengers, etc.

Also for the love of god lol, add a select all/deselect all feature to trading post! rofl.. I have 9 100s!

Great product overall !!

 

[HBfanboy1980]

I put an idle as the last task and it didn't seem to do anything. It just cycled to the first task without pausing.

what about another wait command? your best bet is prolly turning off hbrelog support in this install and using the "wait" to just stay logged into each character for say 10 minutes or whatever amount o time you think is best...

 

[Tktnp]

I would love a "general settings" panel for all my toons and a "specific character settings" if i want to override some general options.

As such if i'm getting late home, I can skip mine collecting on all my toons without going into something as boring as copying xml files because hey i'm a lazy engineer

OFC, it's not as important as fixing current bugs but I would love to see that on the Trello TODO list.

Thanks

 

[evilolz]

Will this do all the garrison quests alone ? like stable and colosseum and stuff like this ?

 

[HBfanboy1980]

Will this do all the garrison quests alone ? like stable and colosseum and stuff like this ?

No, and I wouldn't look for either of those features specifically for a while. Not saying they won't happen, but they aren't top voted currently.

 

[blablub]

I would love a "general settings" panel for all my toons and a "specific character settings" if i want to override some general options.

As such if i'm getting late home, I can skip mine collecting on all my toons without going into something as boring as copying xml files because hey i'm a lazy engineer

OFC, it's not as important as fixing current bugs but I would love to see that on the Trello TODO list.

Thanks

i have 2 honorbuddy folders / installations just for garrison butler, one where it does just missions -> another where it does everything
it takes like 30min (6 chars to setup) but afterwards you don´t have to worry about anything else -> on my main honorbuddy folder (3rd) i can use plugins / change settings in singular and so on, and it won´t affect my garrison so i can´t f uck anything up

 

[blablub]

I apologize in advance if this has already been addressed but... I just purchased this because its close to perfection IMO but im having a few issues...
1) My blacksmith hammer apparently got sold, idk how. But the problem was the botbase goes to my blacksmith hub in my garrison and just spams the HB window that it is trying to craft something... but it cant tell I dont have a hammer, so it just sits there doing nothing in reality but it thinks it is. Can you add something to check if you have the required tools for the profession, and if not, buy them? Simple white tools like skinning knife, bs hammer, etc, are sold inside the garrison.

2) I had to disable the herb harden because if im in the "bottom right" profession hub, the one that is closet.. my guy just gets stuck and trys to run through the walls non stop to get to the pretty flowers. You can see the collission system trying to fix it but it should know to go back and take the main road to the garden instead of trying to get the nearest flower by walking straight to it.

Also a general question... Does the mission starting feature here work similar to the WoW addon "masterplan?" I.e. does it choose both the highest chance of success and higher reward? Or does it just base it 100% chance to complete?

This is important because obviously i might get 1k xp or 20k xp depending on which follower it uses... or 70 vs 300+ garry resources if it chooses to use the scavengers, etc.

Also for the love of god lol, add a select all/deselect all feature to trading post! rofl.. I have 9 100s!

Great product overall !!

i got the engi all in one item, + enchanting rot -> has never been sold.
maybe you used a addon like sell-o-matic and have selected sell white ?
not sure how expensive the gnomish army knife(not sure about the name) is but it worked for me flawless on 6 chars, i hope its at least a workaround for your first issue.

about the missions i don´t got a clue if or how it prioritizes / stacks or uses mission specific buffs, but when you look at a mission which was done by butler and check the used followers you might get some insight that way.

 

[HBfanboy1980]

I apologize in advance if this has already been addressed but... I just purchased this because its close to perfection IMO but im having a few issues...
1) My blacksmith hammer apparently got sold, idk how. But the problem was the botbase goes to my blacksmith hub in my garrison and just spams the HB window that it is trying to craft something... but it cant tell I dont have a hammer, so it just sits there doing nothing in reality but it thinks it is. Can you add something to check if you have the required tools for the profession, and if not, buy them? Simple white tools like skinning knife, bs hammer, etc, are sold inside the garrison.

2) I had to disable the herb harden because if im in the "bottom right" profession hub, the one that is closet.. my guy just gets stuck and trys to run through the walls non stop to get to the pretty flowers. You can see the collission system trying to fix it but it should know to go back and take the main road to the garden instead of trying to get the nearest flower by walking straight to it.

Also a general question... Does the mission starting feature here work similar to the WoW addon "masterplan?" I.e. does it choose both the highest chance of success and higher reward? Or does it just base it 100% chance to complete?

This is important because obviously i might get 1k xp or 20k xp depending on which follower it uses... or 70 vs 300+ garry resources if it chooses to use the scavengers, etc.

Also for the love of god lol, add a select all/deselect all feature to trading post! rofl.. I have 9 100s!

Great product overall !!

i got the engi all in one item, + enchanting rot -> has never been sold.
maybe you used a addon like sell-o-matic and have selected sell white ?
not sure how expensive the gnomish army knife(not sure about the name) is but it worked for me flawless on 6 chars, i hope its at least a workaround for your first issue.

about the missions i don´t got a clue if or how it prioritizes / stacks or uses mission specific buffs, but when you look at a mission which was done by butler and check the used followers you might get some inside that way.

I could never figure it out either, but all my blacksmiths also all of a sudden didn't have a hammer at some point... maybe 2 weeks ago? I replaced them and have not had an issue since. Something definitely happened though because I didn't use sell-o-matic2 at that time, and my garrison farm and mission farm are seperate directory with their own settings and using a basic wow install with no addons whatsoever.

Either way I think it was a one time problem.

 

[Tangaroa]

May I suggest that until barn interaction is perfect that it is always attempted after every other activity? Just now I watched a toon doing some Capoeira in and around the barn for a good 10 minutes, the log said he was trying to mine but he was close to the main exit, very far from the mine.

Eventually he did make it to the mine and started the mining logic which is now very smooth and efficient (love it!), but... I set a 15 minute timer on HBRelog and so he was out of time.

As a general principle I think perfected tasks should go before work-in-progress tasks.

Edit: That damn barn is seemingly specially designed as a trap for bots, its a maze inside and farmer Lok'lub moves around a lot. Many times I have been looking everywhere for that NPC, and anything that is a pain for humans is going to be 100x worse for bots.

 

[chasemay]

Where my devs at? We still expecting missions by end of the week?

 

[blablub]

Where my devs at? We still expecting missions by end of the week?

i think they will post here as soon as they submit it for approval, so you will still know it 1-3 days ahead depending how long it takes the be pushed.

 

[ArmyDr]

Hey guys, loving it still... latest push broke mine so that all of my toons ended up outside of the townhall. Furthermore, it seems like every push has it owns issues, when last release it worked flawless with no issues. I was wondering, is there any way to disable updates from the store? I.e. when I have a stable version that does everything I need?

 

[Engiguy]

None of my guys are fighting the enemies that spawn in the herb garden, they just die from being aattacked and sit there... and then the pathing back to my body was also faulty and couldnt get past the building right next to the gy.. lol

 

[damador]

question on this and hbrelog - its possible to set this - hb relog start for one char - then routine do FULL mainteneace ... and set infor for hb relog to proeceed next char - i dont need constant repeat and relog just fire hb relog then it load / do Char 1 , then char 2 then char 3 fully then quit ...

 

[paulmuadip]

None of my guys are fighting the enemies that spawn in the herb garden, they just die from being aattacked and sit there... and then the pathing back to my body was also faulty and couldnt get past the building right next to the gy.. lol

which CC are you using? - if using singular load default settings, for any other CC you have to set full afk mode at the CC... then it should work fine

question on this and hbrelog - its possible to set this - hb relog start for one char - then routine do FULL mainteneace ... and set infor for hb relog to proeceed next char - i dont need constant repeat and relog just fire hb relog then it load / do Char 1 , then char 2 then char 3 fully then quit ...

on page one there is a guide how to setup HBRelog to work... yes this is possible and many more things ^^

regards...