What's new
By:
  • Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • Visit Resources
  • Visit Downloads
  • Visit Portal
RebornBuddy Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Fury Unleashed II - Premium

Excited about this one! Going to probably purchase on payday (next friday)
 
nomnomnom said:
Thanks for reporting, will fix this!
Click to expand...


Bloodbath, Avatar, Recklessness, and Skull Banner are not being used by the protection rotation.

When "Prevent Chaining" is disabled, enraged regeneration triggers before Last Stand.

The routine does not make use of the incite glyph.

Not sure if the last two are intended since they were also issues in FU1.

When OOC and hardlock is enabled, the game will briefly lag every 5-6 seconds. The issue does not occur when softlock is enabled.

Otherwise enjoying the routine. Hope to see more updates soon!
 
HB5316V34 said:
Bloodbath, Avatar, Recklessness, and Skull Banner are not being used by the protection rotation.

When "Prevent Chaining" is disabled, enraged regeneration triggers before Last Stand.

The routine does not make use of the incite glyph.

Not sure if the last two are intended since they were also issues in FU1.

When OOC and hardlock is enabled, the game will briefly lag every 5-6 seconds. The issue does not occur when softlock is enabled.

Otherwise enjoying the routine. Hope to see more updates soon!
Click to expand...
Thanks for reporting. Will be fixed at next push! :).
 
nomnomnom said:
Thanks for reporting. Will be fixed at next push! :).
Click to expand...

Just have to say, the amount of feedback you give on reported errors and the focus you keep on the cc and fixing stuff. This is what the community loves amongst its developers. Dedication :)
 
Protection Bugs:
In soO part 1 the Nourshen boss it dosnt interupt Titanic corruption when it casts Hurl Corruption for the tanking phase.
It should spell reflect this first, before using interrupts. Intended behavior.

Its not using blood bath which is your t6 talent on aoe fights, however it will use it if you hotkey it and do it manualy.
Fixed at next push.

It isn't using recklessness when you have boss only checked and your skull banner on bosses. It wont use recklessness either when you tell it to do it always.
Fixed at next push.

Bloodbath, Avatar, Recklessness, and Skull Banner are not being used by the protection rotation.
Fixed at next push.

When "Prevent Chaining" is disabled, enraged regeneration triggers before Last Stand.
I didn't think of it that way, and you're absolutely right. Last Stand has a higher prio next push! Would be a shame to use both when only one is needed.

The routine does not make use of the incite glyph.
Support for the glyph has been added to the next push.

When OOC and hardlock is enabled, the game will briefly lag every 5-6 seconds. The issue does not occur when softlock is enabled.
This is a bug in Honorbuddy, and HB dev's fixed it in the next push:
HB-1072 ("ObjectDatabase cacher is doing frequent disk writes.")

Arms Bugs:
HB5316V34 said:
The new routine is not using bloodbath or avatar in the arms rotation. It will use stormbolt, however.
Click to expand...
Should be solved in the next push! Avatar does require recklessness to be up.

Global
Fixed a bug in BotEvents.

Edit: And its pushed to live. Restart your clients!
 
Last edited:
nomnomnom said:
And its pushed to live. Restart your clients!
Click to expand...
So fast! :D

Several more issues I've noticed, not sure if intended:

Arms:
  • No stance dance functionality.
  • Dragon Roar not syncing with bloodbath in single target or aoe rotation because CS has higher priority.
  • Skull Banner not syncing with Recklessness.
  • The routine does not check if CS or MS crit before using Berserker Rage.
  • Berserker Rage is used on cooldown when CS debuff is active, regardless of how much time is left before enrage expires.
  • Single target bladestorm logic is broken:
    • Bladestorm is used on CD if CS and MS are not available, even during the CS debuff window and even when not enraged.
    • Bladestorm is cancelled ONLY when enrage expires. It will not cancel for ANYTHING else including max rage, MS/CS coming off CD, etc.
    • Because the above two rules are the only ones governing the bladestorm logic, the routine will often cast bladestorm when not enraged, and then immediately cancel (because enrage is not up).
Fury:
  • Routine does not check to see if BT or CS crit before using Berserker Rage.
  • The priority on BT is too high during the CS window. There are cases where Berserker Rage could be used to execute a perfect CS window with SB and 3xRB, but the routine uses BT instead.
  • It feels like Berserker Rage is being used too often outside of the CS window (especially when there's only a few seconds left on the CS cooldown) Not sure how much of that is due to the first issue though.
  • The routine is not checking for enrage before using Dragon Roar.
  • When BT is not available, the routine will use berserker rage during bladestorm, regardless of the remaining time on enrage.
  • Occasionally RB is used right before CS, even when only 1 stack is available. I haven't figured out exactly which conditions trigger this.
  • The routine waits for enrage to end before cancelling Bladestorm, even if at full rage with BT available. (not sure if this is optimal or not for single target).
  • With DR, the routine opens with Reck->Skull Banner-> BT->BzR->DR->CS. Since DR is guaranteed crit and at high level BT is almost guaranteed crit, the optimal opener would be Skull Banner-> BT->BzR(if needed)->DR->Reck->CS
Protection:
  • Dragon Roar not being used while bloodbath is up.

I'll add anything else I find.
 
Last edited:
HB5316V34 said:
So fast! :D

Several more issues I've noticed, not sure if intended:

Arms:
  • No stance dance functionality.
  • Dragon Roar not syncing with bloodbath in single target or aoe rotation because CS has higher priority.
  • Skull Banner not syncing with Recklessness.
  • The routine does not check if CS or MS crit before using Berserker Rage.
  • Berserker Rage is used on cooldown when CS debuff is active, regardless of how much time is left before enrage expires.
  • Single target bladestorm logic is broken:
    • Bladestorm is used on CD if CS and MS are not available, even during the CS debuff window and even when not enraged.
    • Bladestorm is cancelled ONLY when enrage expires. It will not cancel for ANYTHING else including max rage, MS/CS coming off CD, etc.
    • Because the above two rules are the only ones governing the bladestorm logic, the routine will often cast bladestorm when not enraged, and then immediately cancel (because enrage is not up).
Fury:
  • Routine does not check to see if BT or CS crit before using Berserker Rage.
Protection:
  • Dragon Roar not being used while bloodbath is up.

I'll add anything else I find.
Click to expand...
You sir, are doing a very good job on testing :). Most of them are easy fixes, will get on them ASAP.
 
nomnomnom said:
You sir, are doing a very good job on testing :). Most of them are easy fixes, will get on them ASAP.
Click to expand...
Thanks, happy to help :D

Added to the list in my previous post, can give more detail or dig up a log if needed.
Any chance we'll see options to link cooldowns with AP? For example, the option to set a vengeance/AP threshold before BB/DR are used? Or the option to use Reck/Banner on trinket procs? Would also love a hotkey to suspend the use of CS (to realign with trinkets).
 
Hey so i bought this yesterday and trialled it during last nights raid on Heroic Garrosh. I still find i have to spam alot more RB then what the routine will do, to optimize performance of my character. Everything else is very nice and the bladestorm logic is fantastic, along with rage dump logic.

Only issues im seeing is in the execute logic and raging blow logic. During execute range it is not using Execute nearly enough as it should and its not using raging blow enough. It likes to keep 1 raging blow stack alot of the time, which i find to be an issue going into CS phase, its not getting enough raging blows in. I can successfully clip 3 raging blows into my CS phase where as im seeing the routine only use 1-2.
 
justanotherday said:
Hey so i bought this yesterday and trialled it during last nights raid on Heroic Garrosh. I still find i have to spam alot more RB then what the routine will do, to optimize performance of my character. Everything else is very nice and the bladestorm logic is fantastic, along with rage dump logic.

Only issues im seeing is in the execute logic and raging blow logic. During execute range it is not using Execute nearly enough as it should and its not using raging blow enough. It likes to keep 1 raging blow stack alot of the time, which i find to be an issue going into CS phase, its not getting enough raging blows in. I can successfully clip 3 raging blows into my CS phase where as im seeing the routine only use 1-2.
Click to expand...
Thanks for the report. I do agree wiht you on both and will be working on it. Expect fixes coming over the next few days to optimize the CS window and execute phase :). Also taking HB5316V34 suggestions into account.

These kind of assist posts really help me to bring this yet to another level :D!
 
just bought the bot. doing H-garrosh tonight. Would u recommend that I use FU1 or FU2?

some questions about settings files.

1) is there a way to combine the 3 settings files into 1? I have diff settings for almost every H-Soo boss. and having to load 3 settings every boss is kinda troublesome.
2) Say if i logged out on Fury spec, the next time i start HB will the settings remain the same as last time?
3) When i switch between spec Fury>Prot will FU2 auto load the last Prot settings(after restarting HB)? or will it remain as Fury settings?

I used to have 2 copies of HB+FU1, 1 for prot and 1 for Fury so i'm not sure how this currently works.
 
Last edited:
extremevil said:
just bought the bot. doing H-garrosh tonight. Would u recommend that I use FU1 or FU2?

some questions about settings files.

1) is there a way to combine the 3 settings files into 1? I have diff settings for almost every H-Soo boss. and having to load 3 settings every boss is kinda troublesome.
2) Say if i logged out on Fury spec, the next time i start HB will the settings remain the same as last time?
3) When i switch between spec Fury>Prot will FU2 auto load the last Prot settings(after restarting HB)? or will it remain as Fury settings?

I used to have 2 copies of HB+FU1, 1 for prot and 1 for Fury so i'm not sure how this currently works.
Click to expand...
I'd definitely go with FU2. Further;

1) Not possible. The settings are split for a reason :). Just export your favourite settings and import them when needed.
2) Yes. Last loaded settings will remain, unless I push a new version with a new version number. Then the settings reset to default. This is cause if I edit (remove/add settings) HB may crash if I use your old files.
3) FU2 should properly rebuild your rotations into prot, check your new talents and glyphs. It should even work without a restart!
 
Hey Nom Great work!! I honestly thought it was just hype how much better this CC was over the old one but boy WAS I WRONG!!! great, awesome, mind blowing are just a few things I think about this new routine!!! keep up the good work!!

on a side note (and just interested) before we downloaded the routine and put it in the 'Honorbuddy\Routines\Fury Unleashed' dir now I can use the routine but I cant find it anywhere does this mean the code is kept on the HB servers and we get access to a compiled exe/dll as I said earlier this is just me being nosey so please don't take offense at the question (personally I hope my theory IS correct, so ppl wont be able to 'steal' your ideas/code)
 
Hi please bare with me and i see the question has been asked before, I purchased FU2 just today and i am not able to get the routine on my system. Is there a place that i need to go to download it? i see that others said download and install the new version of HB. I have done that and when i load it in game it does nto give the option for the routine.. please assist i really would like to test this out before tomorrow... I have FU1 still installed but want to try this new one :)
 
You must log in or register to reply here.
Back
Top