What's new
By:
  • Visit Rebornbuddy
  • Visit Resources
  • Visit API Documentation
  • Visit Downloads
  • Visit Portal
  • Visit Panda Profiles
  • Visit LLamamMagic

FallenDev Act1 Profile

v5.1 completed, just updating all the code.

-- Added protection measures on decaying, den. So if in town... load misery map
-- Also removed multiple tags that were not needed in those dungeons, which could cause a possible stuck.
XP profile set was corrected and will now visit weeping, also removed northern and southern highlands... <-- they were not meant to be in the XP version.. Sorry.
Currently going through all sets and making sure the correct file paths are there.

~Fallen
 
Added a detailed description on the front post, showing what exactly to expect from each profile set. Hope this helps someone :)



Also layout changed, for easier reading, and better understanding.

I hope more read my first page, instead of just quickly posting a question ;)
I'll still answer them as always, but it's nice to get a break every so often.
 
Last edited:
Bertrand said:
Although fallendev hasn't commented anything regarding this randomization matter, I too believe he will see the importance of it and implement something of the sort. We had this earlier implemented in gardettos's revenge, so it shouldn't be too difficult to pull.
Click to expand...

I will look into randomizing now since the profiles are near where I want them to be :)
I have not forgotten you, or your suggestion.

~Fallen


p.s. I looked into that Gardettos version you showed me... that confuses the hell out of me. I mean the logic is easy straight forward, but he put so much
randomization into that profile... that perhaps it was too much lol. I don't really care for his way of using TrinityStop tags though.
Perhaps a randomroll with loading a set of different profiles I'll do. Like I had for my Act3, but I won't implement his way of randomizing. I'll have a seizure.
 
Last edited:
nucleotides said:
As a Neuroscience researcher: Doing things in random order is very un-human. The mind likes simplicity and attempting to switch up profile order would require a person to remember where they have been so far, instead of knowing where to go next. Repeat patterns are easy to remember and recognize, when oddballs happen (a break in the pattern) the mind attempts to shift it's rule set to accommodate the new rule. If you are going to randomize profiles you would have to randomly forget to do parts.

Imo, always do profiles in the same order and do very similar routes, what will not happen is running the exact same circle every time.

TLDR: Randomize pathing within a profile (like Nazair said) with consistent profile order is the most human you can get.
Click to expand...

That's exactly how the profile is right now :)
 
Well! I'm trying all profiles one by one and I'll post my Misc Statistics after 1-2 run/s. As soon as I complete one run , I'll edit this mex.

I'm looking for the best run to EXP! :D:D

Let's start with XP Profile:

-- Fallen_START_
-- Highlands (Manor)----->did
-- Festering---->did
-- Ancients (Dungeon)--------> did
-- Festering 2-------> did
-- Rest (Dungeon)------->did
-- Weeping--------> did ( But for exp , in my opinion, this place is useless )
-- Misery----> didn't :S:S:S:S:S:
-- Scavenger 1 & 2 (Dungeon)----> same
-- Decaying (Dungeon)-----> same
Click to expand...

Maybe I 'm bugged xD Cause my bot didn't go to Fields of Misery -.- After weeping he left -.- two times! :S

===== Misc Statistics =====
Total tracking time: 0h 23,00m 21s
Total deaths: 1 [2,57 per hour]
Total games (approx): 0 [0,00 per hour]
(your games left value may be bugged @ 0 due to profile managers/routines etc., now showing games joined instead:)
Total games joined: 1 [2,57 per hour]
Total XP gained: 14,99 million [38,49 million per hour]

Opinion? No stucks, it runs perfectly but VERY bad to exp!!!!!!! :(

(-) Highlands

-- Fallen_START_
-- Highlands (Manor)------did
-- Festering-----did
-- Ancients (Dungeon)----did
-- Festering 2------did
-- Rest (Dungeon)-------did
-- Agony2-----did
-- Weeping------did
-- Misery--- he left!?!!! AGAIN! -.- WTF! XD
-- Scavenger 1 & 2 (Dungeon)
-- Decaying (Dungeon)
Click to expand...

Maybe I'm rly bugged -.- But without Fileds of Misery my exp runs are useless :(

===== Misc Statistics =====
Total tracking time: 0h 27,00m 19s
Total deaths: 1 [2,20 per hour]
Total games (approx): 0 [0,00 per hour]
(your games left value may be bugged @ 0 due to profile managers/routines etc., now showing games joined instead:)
Total games joined: 1 [2,20 per hour]
Total XP gained: 18,66 million [40,96 million per hour]

Maybe I've found why Misery doesn't work... Working on it!

Ok so.. It's not just my problem xD Fallen There is an error linked between Weeping and FoM. Take a look when you wake up xD

In the meanwhile you are waiting for some fixes I suggest to use this Dev's Profile:
View attachment (-) Highlands Act1 v5.0.zip
 
Last edited:
I'm noticing a pattern as well with most of the profiles here. None of the new updated versions will allow me to move on to FoM. The profile will finish Weeping Hallow, get a "No Neph Stack" error, attempt to load the FoM portion and exit the game stating that it needs to start a new game to continue on to the next profile. At that point it just starts the sequence over.
 
Delete this from all files McBinary:

<If condition="NephalemValorCount() == 0">
<LogMessage output="*~*~*~*NO NEPH VALOR*~*~*~*? Must of been stuck, now loading Fallen_START_" />
<TrinityLoadProfile file="Fallen_START_.xml" nodelay="true" exit="true" />
</If>


I did the same since i'm botting mp10 with no elites. That worked for me. But it's still reloading Weep~n~Misery v5.1 after it cleared Weeping Hollow everytime instead of moving on to next map.
 
dacster said:
Delete this from all files McBinary:

<If condition="NephalemValorCount() == 0">
<LogMessage output="*~*~*~*NO NEPH VALOR*~*~*~*? Must of been stuck, now loading Fallen_START_" />
<TrinityLoadProfile file="Fallen_START_.xml" nodelay="true" exit="true" />
</If>


I did the same since i'm botting mp10 with no elites. That worked for me. But it's still reloading Weep~n~Misery v5.1 after it cleared Weeping Hollow everytime instead of moving on to next map.
Click to expand...

I see. I am also attempting to use the Weep~n~Misery profile, I found that you can change the profile it starts first to be Misery.xml if you choose to.
I switched from it starting with weeping.xml to Misery.xml, I'm currently waiting for it to clear up FoM, to see if changing allows it to load weeping afterwards.

Fallen_START_
Code: 
                   <!--Start Sequence-->

    <LogMessage message="-=Fallen Run Now Starting=-" />
    <LoadProfile profile="Misery.xml" nodelay="true" />




Edit: Nope, it still just does the one profile and then quits to start another.
 
Last edited:
About Xp run:
Might repeat some of the posts with the current problems..but anyways excuse me if i do.
After Cementery bot went to the Fields of misery..he enters the Scavenger's den dungeon. Clear both levels without a problem. Went to the teleport shrine but instead of using it..he teleported to town and then to the Cemetery again. Then the bot take the same way he already run..from Cemetery to the Fields of misery. He even went to the Scavenger's den dungeon entrance but did not enter. He cleared some monsters in Fields away from that dungeon..and then went back and enter Scavenger's den dungeon for a second time. Explore both levels again..but at the end instead of teleporting back to town..he use the teleport shrine and go back to Fields of Misery.

In the final room of Decaying dungeon .. where the ghost quest woman is..bot didn't clear the whole room. Just left(top) side of it which is 1/3 of that room. Bot kill radius is around 120.

Edit: Noticed that after leaving Scavenger's den dungeon .. the bot is taking a strange path and keeps looping it over and over again as shown in the picture. Since this is the second time when the bot backtracks pretty long road i guess there is a backtracking problem which happen after exiting a dungeon. zzzz.webp
 
Last edited:
XP run:
Ive been trying to fix this for myself. Removing the part mentioned on the previous page.
Unfortunately it doesn't help.. My bot keeps doing this:

[Trinity][TrinityMoveTo] Started Tag; x="2637" y="2229" z="0,1" name="16" questId="1" stepId="0" worldId="71150" levelAreaId="19954" (last bit of the weeping hallows profile)
Loaded profile Fallen Fields of Misery (like it should do)
Starting Red Path (like it should do)
Trinity]Loading new profile. (what?)
Loaded profile Fallen Profile (why?)
Trinity]Exiting game to continue with next profile. (??)

This happens EVERY single game, so i guess there is a problem in the Misery.xml somewhere.

Also, another problem that ive noticed;
When clearing festering woods the bot takes the character into the crypt of the ancients, clears it, goes out. and then:
1) continues like normal <IF> the left stone pillar in front of the entrance is still in tact
OR
2) gets stuck at the pillar <IF> the left stone pillar in front of the entrance is broken (it breaks quite easilly)

This happens in about 60% of the games i watch over..
Maybe a workaround could be made so that the bot makes a bigger circle around the pillar? Or just teleports out of the Crypt and goes back via the waypoint instead.

Hope my feedback helps in perfecting the run.
 
HA!!

TO ALL PEOPLE RUNNING THESE PROFILES AND HAVING THE BOT SKIPPING FoM AND RESTARTING INSTEAD:

Open the Misery.xml and add the following lines of code to the "<!--New Profile Stuck Parameters-->" part.

<TrinityIf condition="not ZetaDia.CurrentLevelAreaId == 19952">
<UseTownPortal questId="1" />
</TrinityIf>
Click to expand...

This fixed it for me.
 
As i stated in my previous post fallen, it loads the profile before it even teleports.

I'm talking about Weeping.xml to Misery.xml, there's no waiting on teleporting in the script whatsoever?
 
Read the post i made above yours.. that fixed it for me. i just copied the lines from an old profile.
I guess FD forgot to add those lines when he was coding the profile.
 
Alright will try now, thanks trio, i added it to the misery.xml part u posted
 
blackii87 said:
Alright will try now, thanks trio, i added it to the misery.xml part u posted
Click to expand...

Start the profile from the start, wait till the bot gets 2 NV, pauze it, go to town, load the weeping profile, unpauze. Save a bit of time if you just want to test it.
 
HI, my leader is just doing highlands and skiping every profile and restarts again.
I use Simple Follow.
 
Last edited:
Triosama said:
Start the profile from the start, wait till the bot gets 2 NV, pauze it, go to town, load the weeping profile, unpauze. Save a bit of time if you just want to test it.
Click to expand...

Works now! Awesome, now to test dungeons and FoM :p
 
You must log in or register to reply here.
Back
Top