What's new
By:
  • Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • Visit Resources
  • Visit Downloads
  • Visit Portal

Error even after 5 fully clean fresh installs PLEASE HELP...

Status
Not open for further replies.
Luvs2spludge

Luvs2spludge

New Member
Joined
Oct 26, 2011
Messages
103
Reaction score
0
Help GUYS been having issues with this I have done 5 fresh fully clean installs not useing any other plugins or anything problem still presest...


[23:51:34.721 N] Error trying to save the settings file: The requested operation cannot be performed on a file with a user-mapped section open.

here is full logView attachment 9964 2013-09-20 19.05.txt



Mods, i posted this issue in another forum section please delete it.
 
That was from a fresh install, but ran it for a bit longer, you didnt have to post a guide how ot attach a full log, as you can see, i did post a full log, it was just short because it was a fresh install and once i started it up, it had issues...
But here you go heres another full log for you

View attachment 9964 2013-09-20 19.05.zip
 
thats not a full log. clear your log folder, then start honorbuddy. replicate the issue then upload the new log.
 
CodenameG said:
thats not a full log. clear your log folder, then start honorbuddy. replicate the issue then upload the new log.
Click to expand...

I truly do apologize if i seem rude, but how is that not a full log? i did nothing to minipulate it.
it was ran off a FRESH INSTALL and uploaded like you wanted.

What else do you need?
 
The issue I am having is with that spesific script... Where it states the following
[23:51:34.721 N] Error trying to save the settings file: The requested operation cannot be performed on a file with a user-mapped section open.

And that ERROR REPEATS ITSELF tons of times within the log that I have loaded.

If there is something more you need then you will have to break it down to me because the log I loaded is the full log that was from a fresh install and ran for a while.
So not understanding why you say its not a FULL log.
 
Tony said:
its your CR that fails
Click to expand...

Hi guys,

I sent Luvs2spludge over here, because I couldn't figure out his issue in Kick's thread. He has already done a couple of clean installs following the instructions at my request.

I'm don't think its a CR issue... he's using Singular, and its *really* good about prefixing its log messages with [Singular]. And, the 'config file' message is not so adorned.

But, many times that message is logged, Honorbuddy will sit idle for 3-5 minutes. That is simply killing him.

Wish I had a clue as to what is going on here, and thought more experienced eyes would help. Sorry I can't provide more help on this, and I'm dying to know the root cause.

cheers,
chinajade


Ref: Repy to Luvs2spludge in Kick's thread
 
have you tried going to Start>Control Panel>Add/Remove Programs..........find HonorBuddy and un-install it.
Restart your computer and try a fresh instal.Might help hope so GL
 
johnperdu said:
have you tried going to Start>Control Panel>Add/Remove Programs..........find HonorBuddy and un-install it.
Restart your computer and try a fresh instal.Might help hope so GL
Click to expand...


Yes among other fresh installs about the third time, I did fully wipe HB from my computer by uninstalling from through the remove programs way. Yet this problem still presist... The funy thing is, now that I try to uninstall that route, it is no LONGER on that list... I have a fresh install on my comp, but when i go to remove it that way any more, its not there... So i just delete the folders and reboot the computer and when I do a search for HB its no where to be found on the computer...
Every time I have posted a log some where, they have always been after a fresh install... Minus the first time.
 
chinajade said:
Hi guys,

I sent Luvs2spludge over here, because I couldn't figure out his issue in Kick's thread. He has already done a couple of clean installs following the instructions at my request.

I'm don't think its a CR issue... he's using Singular, and its *really* good about prefixing its log messages with [Singular]. And, the 'config file' message is not so adorned.

But, many times that message is logged, Honorbuddy will sit idle for 3-5 minutes. That is simply killing him.

Wish I had a clue as to what is going on here, and thought more experienced eyes would help. Sorry I can't provide more help on this, and I'm dying to know the root cause.

cheers,
chinajade
Click to expand...


Thank you Chinajade, well put because I have NO clue how to put the issue.

And thank you very much for following up on my issue on this thread.
 
Luvs2spludge said:
I truly do apologize if i seem rude, but how is that not a full log? i did nothing to minipulate it.
it was ran off a FRESH INSTALL and uploaded like you wanted.

What else do you need?
Click to expand...

a log never starts with
Code: 
[23:47:12.360 N] Starting the bot!
- so the thing you posted aint a full log.

what except for doing a clean install has already been tried?
 
randomstraw said:
a log never starts with
Code: 
[23:47:12.360 N] Starting the bot!
- so the thing you posted aint a full log.

what except for doing a clean install has already been tried?
Click to expand...


Hmmm, thats kinda funny because that was the first and ONLY log in my file after a clean install. Once again I am not trying to be a DICK here, but if thats not how a long Starts maybe that could be part of the issue.

I havent done anything because as you can see from my previous post, and the redirect that ChinaJade refered too, no one has given me any advise as to what the issue could be.

I am getting compleatly frustrated here because instead of offering solutions, all any one minsus a few want to do is act like I am stupid and have no clue what I am doing, well your half right. I am not a programer, just a user like most.
I dont speak program language that is why i bring my issues here. So instead of argueing with me like this is some Microsoft help line, tell me where the issue MAY lye, so I can attemp to make some corrections.

Let me start from the very begining. ALL OF THESE INSTALLS are fresh clean installs. After each install, i come accross an issue where it gives me this error.
As you can read above chinajade gave you more info as to what it does. I cant understand the code or what they mean so thats why i bring my issue here.
 
Lets try the following, gimme some answers!

What OS are you using?
Did you install the .NET 4.0 Framework "by hand" or by the "honorbuddy/demonbuddy install wizard"?
same for vcredist_x86?
does your windows-user has administrative rights, did you start honorbuddy as admin?
do you have any anti-virus software enabled (Norton, Antivir, ...)?

once i get home i can also offer to teamviewer you and try to resolve the issue, if you agree. But i'm still @ work for about 2 hours.

regards
 
Windows 7
I have no clue more than likely through install wizard because i never install by hand.
same
Yes user has admin rights and yes I always start all programs as admin
Yes I have avg enabled.


thats fine, ive waited all night another day wont bother.
 
Luvs2spludge said:
Windows 7
I have no clue more than likely through install wizard because i never install by hand.
same
Yes user has admin rights and yes I always start all programs as admin
Yes I have avg enabled.


thats fine, ive waited all night another day wont bother.
Click to expand...

i will pm you once i get home.
I need you to reproduce the error you are trying to report by then, so i can (possibly) figure out its root.

:) think positive, we'll get it right.
 
Not a problem, i already have I cleared out all my log files...
And started HB with Kicks profile for leveling. also i changed my firewall to ask me for premission every time i run a program. hope that doesnt deviate from the issue
but it doesnt seem too as the issue has already occured even after starting HB it gave the error, but I will run it for a bit and send you the log in about 2 hrs
 
Here is just a sample of what its doing

[Singular] Casting Counterspell on Warsong Aberration.FD04 @ 90.9% at 4.1 yds
[Singular] Casting Frostbolt on Warsong Aberration.FD04 @ 81.8% at 4.1 yds
[InteractWith-v719(warning)] Unable to engage Warsong Aberration in 3s--pull-blacklisted for 3m00s
[Singular] Current target invalid. Switching to aggroed mob Warsong Aberration.FD04!
[Singular] Casting Summon Water Elemental on Me @ 96.9%
[Singular] [Pet] Casting Attack
[Singular] [Pet] Casting Freeze
[Singular] Casting Frostbolt on Warsong Aberration.FD04 @ 54.4% at 15.8 yds
[Singular] Casting Ice Lance on Warsong Aberration.FD04 @ 54.4% at 14.0 yds
Error trying to save the settings file: The requested operation cannot be performed on a file with a user-mapped section open.

Moving to Type: Loot, Name: Warsong Aberration
Looting Warsong Aberration Guid:0xF130640B0004FD04
Error trying to save the settings file: The requested operation cannot be performed on a file with a user-mapped section open.

[Singular] attention: Pull Distance set to 45 yds by Questing, Plug-in, Profile, or User
[Singular] Switching to BotPoi: Unliving Swine.8A20!
Error trying to save the settings file: The requested operation cannot be performed on a file with a user-mapped section open.

Mounting: Swift Gray Wolf
We are stuck!!
Trying dismount
We are stuck!!
Trying strafe forward left for 600ms
[Singular] Casting Frostbolt on Unliving Swine.8A20 @ 100.0% at 33.3 yds
Error trying to save the settings file: The requested operation cannot be performed on a file with a user-mapped section open.

[Singular] Casting Frostbolt on Unliving Swine.8A20 @ 100.0% at 33.3 yds
[Singular] [Pet] Casting Attack
[Singular] [Pet] Casting Freeze
[Singular] Casting Frozen Orb on Unliving Swine.8A20 @ 74.5% at 27.4 yds
[Singular] Casting Ice Ward on Me @ 100.0%
[Singular] Casting Ice Lance on Unliving Swine.8A20 @ 30.0% at 25.1 yds
[Singular] Casting Ice Barrier on Me @ 100.0%
Error trying to save the settings file: The requested operation cannot be performed on a file with a user-mapped section open.

[Singular] Casting Ice Lance on Unliving Swine.8A20 @ 0.0% at 17.6 yds
Moving to Type: Loot, Name: Unliving Swine
Looting Unliving Swine Guid:0xF130640000038A20
Error trying to save the settings file: The requested operation cannot be performed on a file with a user-mapped section open.

Mounting: Ultramarine Qiraji Battle Tank
[Singular] Casting Frostbolt on Warsong Aberration.BCC4 @ 100.0% at 36.8 yds
[Singular] Casting Frostbolt on Warsong Aberration.BCC4 @ 100.0% at 31.4 yds
[Singular] [Pet] Casting Attack
[Singular] Casting Ice Lance on Warsong Aberration.BCC4 @ 73.5% at 22.7 yds
[Singular] invalid attack unit Warsong Aberration.BCC4 is already Dead
[Singular] Bot TargetList is empty, no targets available
Moving to Type: Loot, Name: Warsong Aberration
[Singular] Casting Frostbolt on Unliving Swine.BD4D @ 100.0% at 21.6 yds
[Singular] Casting Frostbolt on Unliving Swine.BD4D @ 100.0% at 22.0 yds
[Singular] Casting Ice Ward on Me @ 100.0%
[Singular] [Pet] Casting Attack
[Singular] Casting Frostbolt on Unliving Swine.BD4D @ 11.0% at 8.7 yds
 
Luvs2spludge said:
Here is just a sample of what its doing

[Singular] Casting Counterspell on Warsong Aberration.FD04 @ 90.9% at 4.1 yds
[Singular] Casting Frostbolt on Warsong Aberration.FD04 @ 81.8% at 4.1 yds
[InteractWith-v719(warning)] Unable to engage Warsong Aberration in 3s--pull-blacklisted for 3m00s
[Singular] Current target invalid. Switching to aggroed mob Warsong Aberration.FD04!
[Singular] Casting Summon Water Elemental on Me @ 96.9%
[Singular] [Pet] Casting Attack
[Singular] [Pet] Casting Freeze
[Singular] Casting Frostbolt on Warsong Aberration.FD04 @ 54.4% at 15.8 yds
[Singular] Casting Ice Lance on Warsong Aberration.FD04 @ 54.4% at 14.0 yds
Error trying to save the settings file: The requested operation cannot be performed on a file with a user-mapped section open.
[...]
[Singular] Casting Frostbolt on Unliving Swine.BD4D @ 11.0% at 8.7 yds
Click to expand...

the error itself is to my knowledge that more than one call is accessing the function/file.

can happen for various reasons, prominent ones are antivirus or "sloppy" coding.

did you install ANY plugins / CCs / QBs other than the CLEAN installed ones?
have you tried reproducing the issue while temporary disabling your antivir? don't forget to enable it again after trying!

please report back! :)

e: and - what happens after the error is shown? does anything stop? or is it just a message popping up sometime? then i'd suggest ignoring it, if it has no effect whatsover.
e2: do you have any other programs running which are accessing "active" files in any way? backup software, dropbox (cloud?)
 
Ok turned off AVg problem still there.....
No I am not running anything but HB and Kicks leveling profile.. one thing i did see however in when i first reloaded HB after turning off AVG is this

[20:44:27.554 V] [Singular] === following 1 files with issues ===
[20:44:27.556 D] [Singular] deleted: 14396 SingularRoutine.Context.cs
[20:44:27.556 D] [Singular]
[20:44:27.177 D] [RoutineManager] Routines have been reloaded. Current class-specific list:
[20:44:27.178 D] Singular v3.0.0.3058 v3.0.0.3058
[20:44:27.184 N] [Singular] Starting Singular v3.0.0.3058
[20:44:27.554 N] [Singular] Installation: modified by user - forum support may not available

I have not messed with ANY FOLDERS or Files... Could this be the issue?
 
Status
Not open for further replies.
Back
Top