What's new
  • Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • Visit Resources
  • Visit Downloads
  • Visit Portal

Diablo still freezing on Sader after fresh install

Eleighna

Member
Joined
Sep 10, 2014
Messages
108
Reaction score
6
I'm ready to pull my hair out. I've reinstalled DB/Trinity/QT/Kadala from scratch 4 times now just today, but it still freezes and locks my game up while I'm on my crusader. It does it sometimes on my WD, but I've somehow managed to fix it to where it's minimal. But when I swap to the Sader (exiting DB completely and reloading), and run a rift (I've used both R-Rift profile and RiftBot Rift with Explore profiles), it freezes and lags so bad, my crusader spends more time dead than alive. I've cleared the rifts (and greater rifts) manually on higher levels/ranks so I know I'm not botting above my character's capabilities.

Attached are my log files. Any help would be appreciated. I've also shrunk the screen size to where I can barely see what she's doing, and lowered graphics, to no avail.

Thanks.
 

Attachments

whats your background and foreground settings?
 
set D3 process to a higher than normal priority
 
I've already done that. It's set to above normal. I tried it on High, but it totally shut down my web browser and didn't change the freezing or lagging at all.
Does DB just not play well with Saders or is there something else I'm missing?
It seems to be fine on my WD for the most part, but it still is almost unplayable on my Crusader.
Thanks :)

Edit: It is not doing so fine on my WD. I have been sitting here and watching it, still doing same freezing, but nowhere near locking up the game like the Crusader.

2nd Edit: So, I reinstalled DB yet again, I have latest Quest Tools, Trinity, EZ Updater, and Kadala. I set D3 process to above average priority. I changed the properties of DB, D3 and Bnet app to all run as admin permanently. Mostly, it's working fine on my WD. Still a no-go on the Crusader at T4 (I can manually just wipe T5 clean in 15'ish minutes, normal rift). It lags so bad my toon spends more time dying from not being able to do anything, than actually clearing rifts.
I've unticked Use Steed Charge OOC, I have Akarat's off CD checked. I tried using the Holy Shotgun crusadercombat.cs file that was posted and was working for others, but when I replaced it in my files, if I went to config Trinity, it crashes DB every time. So I just reinstalled DB again and left it alone.

I've tried it on my Wizard and my DH, and it works great. It's just the Crusader that renders the game almost unplayable/unbottable.

Does anyone have any ideas or a working holy shotgun cs file that works without freezing the game? (I don't have a Fate of the Fell, but have 6pc Akkhan's).

Thanks.
 

Attachments

Last edited:
I'm not sure WHY this made a difference, but I disabled Trinity, and downloaded HerbFunk's Funky Bot and switched to it instead. Changed the priority process back to High (just as I did with Trinity an hour ago to no avail), and while my game isn't 100% smoother, my Sader isn't stuttering her way to death every 5 minutes. I'm reading a lot about other Crusaders having issues with DB, I'm still thinking this is a Sader compatibility issue with DB/Trinity, as it's the "newest" class to the game.

Whatever the case may be, it's fixed to the point I can safely step away for a few hours and let it run and know that she's actually doing something.

Now if my Fate of the Fell would just drop....
 
Yes, Tony, I've done all the of that, countless times, I said above I updated with EZUpdater, as well as I have also updated manually.
At this point I'm frustrated to the point of giving up because I'm not getting anywhere.
I thought I had the problem solved last night, but came back to my bot this morning and she's doing the same thing, lagging, freezing, and dying. On my Crusader.
 
can you gimme the latest log file with the updated Trinity in that case plz?
i wanna check it with rrrix
 
Well I'm trying to, but on the uploader it just spins and says "Sending request to thebuddyform" etc...I've tried 3 times now but it just gets stuck. Not sure what's up, but it won't upload my log file I just made. I shut down DB and D3 and tried, and nothing.
 
Here's a fresh log that I just did a few Greater Rifts on my Crusader with. I used R-Rift profile, kept everything else as before. She fails at 16 because of the lag and also because she seems to get lost (I'll work on tweaking that or finding another profile). I can't seem to make my chars run Greater Rifts with any profile *but* R-Rift, even ticking the "Enabled" Box in Quest Tools under Rift Control and changing it to 40%

Thanks for any help.
 

Attachments

I hope the above logs help, but I also noticed while having DB where I could see it beside Diablo, that my Ticks per Second drops to around 3-4 while either my WD or my Crusader are near mobs, and when they're in the clear, Ticks/s go up to 8-10. I remember the friend of mine that introduced me to DB told me they should hold steady around 9, and they're not. They're averaging around 5, and I haven't changed that TPS modification option either.
 
I have this exact problem, I used Demon Buddy in the past and it worked great. Decided to use it again when I started to play again and I am barely able to use it due to this issue. I have tried both the beta and stable versions but to no avail.
 
I have this exact problem, I used Demon Buddy in the past and it worked great. Decided to use it again when I started to play again and I am barely able to use it due to this issue. I have tried both the beta and stable versions but to no avail.

open your own thread plz
 
i am using Rift Bot Full with Bounties by rrrix,no issues at all

can you give it a try?
 
I have used Rift Bot by rrrix, same issues. No matter which profile I use. Is anyone looking at my logs? I normally use Rift Bot Explore by rrrix, but it won't do Greater Rifts, none of them do, which is what I'm interested in. Unless I'm missing something. I go to Trinity's Rift Control panel and set priority for Greater > Trial > Normal, and it still does normal on these profiles.
Will try one last time and report back.

Edit: I did the Rift Full with Bounties, that I found in DyingHymn's thread, and it took off and did bounties, NOT Greater Rifts. How do I make it do greater rifts only? I configured it through Trinity to Greater>Trial>Normal, but now it's doing bounties. Which profile are you referring to? The only one by rrrix I found is R-Rift, which is what I was already using.

The lagging hasn't changed at all. I don't think that's the source of the issue.
 
Last edited:
Almost solved!

I think I solved it. I completely uninstalled Diablo & Demonbuddy. Erased every trace off my system. From what I gathered reading numerous threads, I decided to reinstall Diablo into a simple directory, C:\Diablo III an DB into C:\DemonBuddy. I erased all zip files of any plugines, routines, etc, and redownloaded the DB zip. Installed that, and downloaded EZ Updater and let it update Trinity and Quest Tools. Also installed Kadala.

I chose Rift Bot Full (not with bounties) because I have well over 2k frags and don't need any more. Thus far, it seems to be working wonderfully with my Crusader, however there are a few things I have noticed that maybe someone could help me with.

1. My Crusader seems to leave a lot of Rare Elites (Yellows) at half or less health. She just goes about as if they're already dead and continues with the rift. Does fine with Champion packs. This could be an issue with Greater Rifts.

2. How do I make DB do a greater rift without using R-Rift? I see the Rift Control in Quest Tools Plugin, but when I change the priority to Greater > Trial > Normal, leave everything else alone, and check "Enabled" and change it to 40%, she still continues with normal rifts and totally ignores the trial keys/greater rift keys sitting in the stash or inventory. Is R-Rift mandatory for running Greater Rifts? I can't seem to make it work any other way.

3. On the Rift Full with Bounties, what happens? Will she do one act of bounties, then do a rift? I might keep that in mind when I eventually need more frags. Primarily right now I'm interested the most in farming Greater Rifts.

4. Is "Use Steed Charge OOC" Off of Cooldown or Out of Combat? I'm assuming it means out of combat, which, again, is critical in Greater Rifts. However, if I also have "Use Movement Spells Out of Combat" checked, then Steed Charge option is not really necessary, is it? What do most Crusaders play with?

5. My holy shotgun w/Fate Sader acts like a baby. I know there's some tweaking of sliders I can do, but I've had them set for so long, I've forgotten HOW. She has the arcane Julia's cameo neck, so I'd move the health % to 0, correct? I don't know how to make her "cowgirl up" and take it like a true Sader until she's around 40-50% health unless it's those sliders. Even then she still runs loop-de-loops around the mobs looking like an idiot.
Oh, and I also set both DB and D3 to run as administrator again after install, and once again also gave Diablo "High" priority in Task Manager.

Thanks so much, those are the last few questions I promise! :D
 
Last edited:
1. I have no idea. Check loot settings.
2. QuestTools is a rrrix plugin. it only works with his Adventure mode r-rift profile.
3. -
4. Leave it with steed charge ooc, you do not have any other movement spells.
5. Yeah just put the health to 0.
 
Back
Top