[PAID] #DeathKnight

tolraucion · May 3, 2015

mariola said:
Hey just a quick question... How do I know if aoe toggle is turned on or off?
Maybe we could get an overlay announcement?

Overlay is planned, for now you have to check the log.

mariola · May 4, 2015

tolraucion said:
Overlay is planned, for now you have to check the log.

Thanks for the reply.

By log you mean the log inside the HB window, right?
What am I looking for there?

tolraucion · May 4, 2015

mariola said:
Thanks for the reply.

By log you mean the log inside the HB window, right?
What am I looking for there?

When you're in combat the hotkeys get registered. Go attack a dummy and you can see in the log:

#DeathKnight: Hotkeys Registered

And then when you push your AoE Toggle hotkey, you'll see something like:

#DeathKnight: AoE Disabled

When you enter combat, AoE will always be enabled.

Trixiap · May 4, 2015

When I was doing Proving grounds as Unholy DK in Necroblight spec, bot didn´t use blood boil. Blood boil can be very useful and should be used when there are more than 2 targets.

On fight like Kromog or Beastlord, blood boil is must have.

chase11 · May 4, 2015

Trixiap said:
When I was doing Proving grounds as Unholy DK in Necroblight spec, bot didn´t use blood boil. Blood boil can be very useful and should be used when there are more than 2 targets.

On fight like Kromog or Beastlord, blood boil is must have.

Blood Boil should only be used on 3 or more targets, not 2.

tolraucion · May 4, 2015

Trixiap said:
When I was doing Proving grounds as Unholy DK in Necroblight spec, bot didn´t use blood boil. Blood boil can be very useful and should be used when there are more than 2 targets.

On fight like Kromog or Beastlord, blood boil is must have.

Not sure what you have your settings set to, but it uses Blood Boil just fine for me in Proving Grounds. Please provide logs, along with spec and settings, if you think there is an issue. If you don't provide these things then I can't help you.

chase11 said:
Blood Boil should only be used on 3 or more targets, not 2.

BB is used at 4+ for Necroblight and BoS, when using Defile it's 2+. I haven't figured out why this is the case, but I've verified several times.

chase11 · May 5, 2015

Blood Boil at 3 targets is worth it at very high gear, 695+ish. But for the CR 4+ targets is more than fine.

Trixiap · May 5, 2015

I said "more than 2" = 3+. Reason why blood boil should be used on 3+ targets is because you are missing 1 tick, if number of targets is no exactly 1, 2, 4, 8, 16, 32 etc.

I will try reproduce proving ground bug and post you log.

Enslaved · May 6, 2015

Ok I finally had some time to get this routine working just fine and no fps issues anymore, but one question, why does it use blood boil during single target encounters? Other than that everything seems really good so far

tolraucion · May 6, 2015

Enslaved said:
Ok I finally had some time to get this routine working just fine and no fps issues anymore, but one question, why does it use blood boil during single target encounters? Other than that everything seems really good so far

There is currently a bug where it tries to use Blood Boil to get to zero runes before using Empower Rune Weapon. Once ERW has been used it won't use it anymore. If you have your cooldowns set to "on boss" and you're killing single target trash (like the giant before blast furnace) it will do AWFUL because it's trying to go to zero runes =/

It is fixed in the next version but I'm trying to get some other changes in before I can push it out to you all ^_^

the_small_one · May 6, 2015

Hi there I tried your CR for a few raids and I tried to reinstall and still the same thing, it's a resource hog and a massive one.
I go from 90+FPS to 5-10 on some fights. And can't figure why.
No other CR does that, I also tried Hardlock, Softlock, 10 / 100 tps still no changes.

Am I the only one? Is this a bug (hope so) ?

tolraucion · May 7, 2015

the_small_one said:
Hi there I tried your CR for a few raids and I tried to reinstall and still the same thing, it's a resource hog and a massive one.
I go from 90+FPS to 5-10 on some fights. And can't figure why.
No other CR does that, I also tried Hardlock, Softlock, 10 / 100 tps still no changes.

Am I the only one?

I need a TON more information if you want me to fix this. Logs, spec, talents? Which fight are you getting FPS lag on? Are you using enyo? What's your tps set to?

the_small_one said:
Is this a bug (hope so) ?

Nope, this is a feature. Dropping you from 90fps to 10fps cuts damage received in raid by 89%. This FPS drop is a feature.

noggii · May 7, 2015

the_small_one said:
Hi there I tried your CR for a few raids and I tried to reinstall and still the same thing, it's a resource hog and a massive one.
I go from 90+FPS to 5-10 on some fights. And can't figure why.
No other CR does that, I also tried Hardlock, Softlock, 10 / 100 tps still no changes.

Am I the only one? Is this a bug (hope so) ?

have the same issue yesterday at Oregorger hc, darmac hc, gruul hc, Thogar hc, flamebender hc... a few weeks ago the routine was fine but yet.. terrible fps drops to ~15fps :|
With a other routine my fps around 40fps

Unholy Plaque spec
Enyo
test Hardlock/softlock
tps test at 15,30,100.. even the same fps drop.
If i stop the Routine, my fps are "normal" at ~45fps

Some logs from yesterday for you to play with

View attachment 41096 2015-05-06 20.27.txt
View attachment 49240 2015-05-06 22.00.txt
View attachment 47236 2015-05-06 21.30.txt

tolraucion · May 7, 2015

noggii said:
have the same issue yesterday at Oregorger hc, darmac hc, gruul hc, Thogar hc, flamebender hc... a few weeks ago the routine was fine but yet.. terrible fps drops to ~15fps :|
With a other routine my fps around 40fps

Unholy Plaque spec
Enyo
test Hardlock/softlock
tps test at 15,30,100.. even the same fps drop.
If i stop the Routine, my fps are "normal" at ~45fps

Some logs from yesterday for you to play with

View attachment 178188
View attachment 178189
View attachment 178190

Thanks for the info! I don't see anything crazy going on in the logs so not much I can do off hand =/ sorry. One thing that could be worth a try is disabling all addons just to double check none of them are interfering with the routing. I don't know how they would, but it's the only thing I can think of.

I will say though that a performance review / improvements are planned. While I can't say when they will come, I will say it's getting close to top priority. So possibly as soon as version after next.

the_small_one · May 7, 2015

tolraucion said:
Nope, this is a feature. Dropping you from 90fps to 10fps cuts damage received in raid by 89%. This FPS drop is a feature.

Good, but then please add an option to disable

Sarcasm aside this could have been because of the

No defined rotation! #DeathKnight uses its custom damage engine to calculate the best move at any given time

Maybe sensing the computer has a bit to offer (i5 4690 / 8Gb Ram) it might try to calculate too much and end up being a resource hog.
As for info about spec etc :
Unholy 3-3-1-1-1-1-1
Lag on Any fight inside BRF, but no tried outside tbh, will try this week.
Enyo, tried hardlock, softlock, nothing (both unchecked) and tps going from 10 to 100 for the 3 possibilities.
As for log I dont have any atm.

liuqyn · May 8, 2015

This really, really, really, really, really needs an option to not auto-dismount. Can't run past a damn rabbit without leaping off your mount and attacking.

timste · May 9, 2015

Wouldn't that be your botbase's problem? I could be wrong.

On another note, I just want to say awesome work. I fired up the CR for the first time in a while to see how it handled BoS spec for mythic Darmac. 95th+ percentile, yeah baby 50.7k dps

tolraucion · May 9, 2015

liuqyn said:
This really, really, really, really, really needs an option to not auto-dismount. Can't run past a damn rabbit without leaping off your mount and attacking.

Yeah this is a possibility, I'll see what I can do.

timste said:
Wouldn't that be your botbase's problem? I could be wrong.

On another note, I just want to say awesome work. I fired up the CR for the first time in a while to see how it handled BoS spec for mythic Darmac. 95th+ percentile, yeah baby 50.7k dps

Nah, that's on me lol ^_^

I'm glad it's working for you!

the_small_one · May 9, 2015

timste said:
On another note, I just want to say awesome work. I fired up the CR for the first time in a while to see how it handled BoS spec for mythic Darmac. 95th+ percentile, yeah baby 50.7k dps

Really? I tried a few time and it hardly manage to keep BoS up for more than 10s so ended up being way too far behind NP for this fight.
But as NP it did really great. Well until we wiped that is

timste · May 9, 2015

I failed to mention I was tanking. Oh, and you gotta use the Chains of Ice Glyph to give you more RP.

[PAID] #DeathKnight

Community Developer

Member

Community Developer

Member

Member

Community Developer

Member

Member

New Member

Community Developer

New Member

Community Developer

New Member

Community Developer

New Member

New Member

New Member

Community Developer

New Member

New Member