What's new
By:
  • Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • Visit Resources
  • Visit Downloads
  • Visit Portal

CLU (Codified Likeness Utility)

Status
Not open for further replies.
Kroniq said:
Love this CC Wulf and appreciate all the hard work you are continually putting into it. Also i must say im happy with the mature stance you took on this new Dev Rule Change thats getting blown out of porportion. Also if ya have plans to do a Resto Druid rotation I'd be more than happy to test it for you and provide feedback.
Click to expand...

Hi Kroniq, Thank-You, its good to hear positive feedback and I appreciate for your support.
 
wulf said:
Hi zeldrak, you could apply your DoT's on one target then "TAB" to the next target and allow CLU to apply the DoT's on that target, and so on and so forth :)
Click to expand...

Yeah, I tried to do that. It's odd because something won't let me tab to another target. When I press tab nothing happens. It's the same when I try and cast a spell. I have to click the spell numerous times before it gets casted. I think it may be something to do with HB or something, maybe running so quickly? It's incredibly delayed. But, it's ok. I think it'll work out well enough once I'm done leveling.
 
As some developers are moving on - leaving a partial void - I am thinking of adding some PvP rotations, this is something that can be done fairly quickly if the community were to suggest Priority's for each class. If movement is required for this to be successful I can prioritize "movement" over "healing logic" to strengthen the PvP Community. Just a thought.
 
Hi, i noticed for the moonkin part of this when im in DS10 on certain bosses it keeps casting FF, is this something to do with that another druid was in the raid so the debuff check keeps happening?

Love this cc btw.
 
haxed said:
Hi, i noticed for the moonkin part of this when im in DS10 on certain bosses it keeps casting FF, is this something to do with that another druid was in the raid so the debuff check keeps happening?

Love this cc btw.
Click to expand...


Hi haxed, looking at the Faerie Fire logic it should Cast Faerie Fire on a boss if the ArmorReductionDebuff is not applied either by you or another player that can provide the ArmorReductionDebuff.

EDIT: I think I see the problem, I will update tonight.
 
wulf said:
Hi haxed, looking at the Faerie Fire logic it should Cast Faerie Fire on a boss if the ArmorReductionDebuff is not applied either by you or another player that can provide the ArmorReductionDebuff.

EDIT: I think I see the problem, I will update tonight.
Click to expand...

Hi, thats great. I wasn't sure if some bosses didn't allow FF to be used or something i found it wierd cos it was only on Ultraxion and Madness. Im so impressed with this though, if you are thinking of adding some pvp logic i think it needs to prioritse Mushrooms a little more as it rarely seems to use them in PVP unless thats because its set to 6 in the settings i don't know. Maybe adding a logic to use barkskin when your hp drops below a certain number aswell.

Anyway i will keep you posted of any recommendations i think of if you like?

Haxed
 
Last edited:
So today I was bored and felt like tanking, and even in 3/4 DPS gear, my DK just blazed through randoms all day long, not one death, not one wipe :)
Nice job on that part too <3
 
Hey Wulf, just so I know beforehand, how does CLU tank in a raid? I haven't read up on the tanking part of DS, but how would it handle a fight where tanks need to swap aggro? Would it ever taunt or is that left on manual?
Thanks in advance :)
 
Toney001 said:
Hey Wulf, just so I know beforehand, how does CLU tank in a raid? I haven't read up on the tanking part of DS, but how would it handle a fight where tanks need to swap aggro? Would it ever taunt or is that left on manual?
Thanks in advance :)
Click to expand...

All tank rotations have tanked DS, self heals, healthstones, etc...taunting is left to you.

Be prepared to back off the target when you need to swap to drop stacks (at least until ive added "PauseRotation" keybind) as most of the rotations rip threat from bad tanks.
 
Last edited:
Want to try your CC in DS next time as shadow.

Just one quick question beforehand:

Is multitarget dotting supported? aka. VT and SW: P on Focus and mouseover and refresh SW: P via MF if possible?
 
buzzerbeater said:
Want to try your CC in DS next time as shadow.

Just one quick question beforehand:

Is multitarget dotting supported? aka. VT and SW: P on Focus and mouseover and refresh SW: P via MF if possible?
Click to expand...

Hi buzzerbeater,

  • Yes multitarget dotting with VT, SW: P, DP, & SW: D if targets are less than 25%. (There is a setting in the GUI "Automatic/Manual") Automatic scans nearby mobs that do not have the debuff and casts it on them...refreshing if necassary. It only Maintains DoT's between 1-5 targets.
  • SW:P is not refreshed with MF during multitargeting...should it be?
  • multitarget dotting is only used with the "Default" rotation, not the "MindSpike" rotation found in the GUI under Priest.
  • CLU has been tested with a Heroic geared priest pulling 80k dps in Madness using the mindspike rotation :D

Good luck and have fun :)
 
Last edited:
wulf said:
All tank rotations have tanked DS, self heals, healthstones, etc...taunting is left to you.

Be prepared to back off the target when you need to swap to drop stacks (at least until ive added "PauseRotation" keybind) as most of the rotations rip threat from bad tanks.
Click to expand...

Great to know, thanks man! It's too late for me today, but I'll def try over the weekend :).
 
wulf said:
Hi buzzerbeater,

  • Yes multitarget dotting with VT, SW: P, DP, & SW: D if targets are less than 25%. (There is a setting in the GUI "Automatic/Manual")
  • SW:P is not refreshed with MF during multitargeting...should it be?
  • multitarget dotting is only used with the "Default" rotation, not the "MindSpike" rotation found in the GUI under Priest.
Click to expand...


1.Yeah, i know the gui, used it a lot on my Hunter, great work with the Hunter btw.! But what does automatic do exactly? Does it dot everything in range? or does it dot like i asked mouseover and focus? if auto dots everything, what does manual then do? Mouseover and focus or else?

2. lets put it this way, using a GCD for refreshing instead of 1tick/GCD of MF is a dmg loss, would be logical at least. :D

3. Nice to hear of a mindspike rotation. Would this be the 4piece t13 rotation? line up archangel and shadowfiend, then spam like crazy and afterwards continue with dots?

4. Ahhh there comes a new question to my mind, does it refresh VT at the end of a huge int buff, if the cast time is lower then 10? (Followed some big discussion about this and dont know if it is a real dmg gain)

Sorry for asking so many questions, just want to make sure what i have to expect. :D
 
buzzerbeater said:
1.Yeah, i know the gui, used it a lot on my Hunter, great work with the Hunter btw.! But what does automatic do exactly? Does it dot everything in range? or does it dot like i asked mouseover and focus? if auto dots everything, what does manual then do? Mouseover and focus or else?

2. lets put it this way, using a GCD for refreshing instead of 1tick/GCD of MF is a dmg loss, would be logical at least. :D

3. Nice to hear of a mindspike rotation. Would this be the 4piece t13 rotation? line up archangel and shadowfiend, then spam like crazy and afterwards continue with dots?

4. Ahhh there comes a new question to my mind, does it refresh VT at the end of a huge int buff, if the cast time is lower then 10? (Followed some big discussion about this and dont know if it is a real dmg gain)

Sorry for asking so many questions, just want to make sure what i have to expect. :D
Click to expand...

  1. See my edited post above
  2. maybe bennyquest can answer this one :)
  3. Yes the mindspike rotation is as you explain it.
  4. maybe bennyquest can answer this one
 
Change Log
-------------

* 28/4/2012 [2.5.1] Added keybinds, checkout the Keybinds in the GUI

BIG Update....Keybinds within game.

I have tried to implement it as user friendly as possible but there could be some bugs. I have not seen any.

  1. Open CLU Configuration
  2. Select the "Keybinds" Tab
  3. Assign a Keybind from the Dropdown box to a function of CLU
  4. Click "Save"
  5. Click "Close"

Begin using CLU, press the Key you assigned (while in game) and the Setting should be toggled (Its very fast at the moment as I have it attached to Pulse())

Features:
  • The settings are saved for use when you next start CLU.
  • Keybind Status is output to the Honourbuddy live log (in red)
  • It will not allow multiple key binds of the same Key.
  • You can now Pause CLU's Rotation

CLU functions keybindable:
  • Cooldowns Managment
  • Pause Rotation!
  • Multi-Dot Management
  • Healing/Defensive skills management
  • Interupt Management
  • Raid/Party buff management
  • AoE Management
  • DS Extra button click management


This is not the final version of this Keybind implementation, I know it needs improving.

I did have a women saying "Rotation Paused" and "Rotation Enabled" but she wouldnt shut up, so she will have to wait for the next release :)
 
Last edited:
Keybinds don't seem to be working :(.

For example I set Pause Rotation to left alt.
When I hold it, you'll see the HB log spamming "Pause Rotation=True Pause Rotation=False", and it never stops.
When I press it once, it'll just toggle it on and off immediately, and, again, it never stops.
 

Attachments

Toney001 said:
Keybinds don't seem to be working :(.

For example I set Pause Rotation to left alt.
When I hold it, you'll see the HB log spamming "Pause Rotation=True Pause Rotation=False", and it never stops.
When I press it once, it'll just toggle it on and off immediately, and, again, it never stops.
Click to expand...

Hi Toney001, thanks for the Log.

Its scanning too fast at the moment for pause rotation, im working on that now. I just "Tap" the key and watch the log for it to return PauseRotation= True...I know its not working completly as intended, Cooldowns and other true/false settings seem to be ok..

Work in progress :)
 
wulf said:
Change Log

This is not the final version of this Keybind implementation, I know it needs improving.

I did have a women saying "Rotation Paused" and "Rotation Enabled" but she wouldnt shut up, so she will have to wait for the next release :)
Click to expand...

That's why u need a male voice , i am sure he wouldn't randomly spam for no reason ;)
They belong to kitchen for a reason :cool:
 
tonari said:
That's why u need a male voice , i am sure he wouldn't randomly spam for no reason ;)
They belong to kitchen for a reason :cool:
Click to expand...

Haha, that's what I said to my wife *ducks for cover*

Creating a timer to slow it down....SVN update soon....

EDIT OK..see if that's any better, its a two second key press....
 
Last edited:
i have been using HB for a little over a month now, and I just noticed something when I downloaded and extracted your CLU cc. When I start Honor Buddy it gives me quite a few lines of

'UnitSelectionDelegate' does not exist in the namespace 'CLU' (are you missing an assembly reference?)
File: Spell.cs Line: 511 Error: The type or namespace name 'UnitSelectionDelegate' does not exist in the namespace 'CLU' (are you missing an assembly reference?)

Is this normal? I get pretty much a wall of spam. If you need me to upload a log I will. Just wanted to know if it was normal that is all.
 
Status
Not open for further replies.
Back
Top