[FREE] [Bot] Enyo - The ultimate raiding botbase!

[Frostulv]

If the routine doesn't fully support framelocking, the fps will tip over like titanic if you try and use hardlock.

I understand, but when i start up Honorbuddy and choose my TuanHA Paladin routine it says it is best used with Hardlock.
Since that happening then i am thinking it could be something with my system since working better for other.

I got all updated to latest.

Hope we can get to bottom of this

 

[rosek]

i have exatly the same problem ... i7 + gtx 570 + 8gb ram ... and with tuanha paladin special edition + Hardlock i got 15 fps infight ...
without bot i have 60 fps

 

[nomnomnom]

Any reason why hard lock unticks itself ?. Every time I check it and look back in 5 minutes it's unchecked again . Unless I missed something.

Shouldn't be a reason except a routine overriding the setting. Post a logfile .

Tyrael, are you able to add support for the Radar plugin, you can find the plugin here.

Enable plugin pulsing in the Tyrael GUI.

Need an advice on the Framelock Features: enabling Hardlock as its beginning to confuse me a bit or actually wow and its FPS is:

Been running steady on like 30 FPS during 25 man raiding for a very long period, Hardlock was set to 30 which worked for me, now most fights FPS more like 3-5 FPS now makes it unplayable.
Question is how/what to set framelock to when: Encounter without HB starts at 60 FPS, during encounter it drops to 30ish. When starting HB and setting Hardlock to: 30 TPS drops to 3-5 FPS, 60 TPS drops to 3-5 FPS, in between is simular. Setting HB Softlock i can hold 10-15 FPS during encounters, which is ok, but DPS performance compared to setting Hardlock isn't. 2.Question reason/surgestions for this drop of FPS could be nice to know, i did try re-installing both HB and TYR unfortunate same performance. btw running Kingwow and that have been tested with different releases aswell including one or my older release which ran perfect before trying to limit reasons.

Kindly post a logfile. Your explanation is good, but doesn't provide all the required information.

Can you please add an AntiAFK into this?

Thank you for ur great work.

Hmm, maybe. I'll think about it.

Anti-AFK would be cool I agree. Also I would like to see some sort of Auto Accept when I am LFR, too many times I have gone to make a coffee gone to the toilet etc only to come back and I have missed the invite into LFR..... ARRGGGGG!!!!

Well if we're going this way, enable plugins and use a auto accept plugin ...

Thanks for reply, but where in the second post is it descriped that my FPS drops from 30-40ish to 2-3FPS (only in raids) when i have been running steady on like 30FTP for over a year now, other than the fact that Hardlock Lock is HonorBuddy and not Tyrael? unfortunate this seems to be the only forum which writes about Framelock really.

Noticed that i have MS Vis C++ in mutiple version 2008 (x64,x86) 2010 ((x64,x86), 2012(x64,x86) can this caurse an issue/conflict? sorry for looking for a desperate solution, but unfortunate its not even possible for me to raid anymore and as this is the only usage i have with HB.

No issue with your versions.

If the routine doesn't fully support framelocking, the fps will tip over like titanic if you try and use hardlock.

You made me lol .

I can't tell you why, but I experience the same with TuanHA routines. When Hardlock the fps drops considerably, softlock is ok for me but still the routines are much heavier on the system than Millz or Oracle for example.
Using an i5-4670K@4GHz with AMD 7950, using TuanHA in raids I don't even get 30fps, always lower.

I guess its well-known that TuanHa routines are performance-eaters. That's also the main reason why I introduced the more-forgiving softlock again .

Hi

When i use HardLock with TuanHA Paladin my performance get realy bad.
TuanHa recomend to use hardlock on Tyrael.
I got an new i7 system with 16GB Ram, GTX 670 and running the game normaly in 60FPS.
But i drop to 30fps with hardlock on.

My friend have an laptop and he runs Hardlock without performance hit, so what can be the problem ?

Cheers

First start with posting a logfile, but I don't think its an issue with Tyrael. Probably something is broken within Tuanha's routine. Also, I've never heard of one TuanHa routine running properly without massive framedrops on hardlock ...

I understand, but when i start up Honorbuddy and choose my TuanHA Paladin routine it says it is best used with Hardlock.
Since that happening then i am thinking it could be something with my system since working better for other.

I got all updated to latest.

Hope we can get to bottom of this

That's a message from the routine stating you that you should use hardlock. For now I recommend using softlock as it is much more forgiving, and post a logfile in Tuanha's topic and explain your issue there.

i have exatly the same problem ... i7 + gtx 570 + 8gb ram ... and with tuanha paladin special edition + Hardlock i got 15 fps infight ...
without bot i have 60 fps

See above.

 

[kartook]

Forgive me if I'm being stupid however, I don't know how to get the bot started.

I created a folder in the Directory checked it out using SVN however where do I start the thing when i start HB?

Thanks!

EDIT: xD figured it out thanks anyway

 

[profx]

Hello, I am using Tyrael with my leveling mage with Singular. I am using "Enable Continuous Healing Mode" to attack not even on combat. But he is even trying to attack to friendly NPCs and dead mobs. How can i fix this? I only want it to attack alive mobs.

 

[Ebano]

Damn you got a special mage then if he can heal

Hello, I am using Tyrael with my leveling mage with Singular. I am using "Enable Continuous Healing Mode" to attack not even on combat. But he is even trying to attack to friendly NPCs and dead mobs. How can i fix this? I only want it to attack alive mobs.

 

[profx]

Damn you got a special mage then if he can heal

Joking right? You are missing the point, it is for working out of combat, so when you select mobs, it is using combat routine like you are already in combat..

 

[nomnomnom]

Damn you got a special mage then if he can heal

You can abuse the Healing Mode to let Tyrael run when not in combat. It's called healing mode, but it may also work for various other methods . There are a few DPS routines who benefit with enabling healmode.

Hello, I am using Tyrael with my leveling mage with Singular. I am using "Enable Continuous Healing Mode" to attack not even on combat. But he is even trying to attack to friendly NPCs and dead mobs. How can i fix this? I only want it to attack alive mobs.

Sorry but that is not a Tyrael issue. Tyrael does not check whether the target is a valid target or not. That is a task for the routine, so report it to the routine author .

 

[profx]

You can abuse the Healing Mode to let Tyrael run when not in combat. It's called healing mode, but it may also work for various other methods . There are a few DPS routines who benefit with enabling healmode.


Sorry but that is not a Tyrael issue. Tyrael does not check whether the target is a valid target or not. That is a task for the routine, so report it to the routine author .

Thank you so much for your fast answer, have a nice day

 

[lve2raft]

I guess its well-known that TuanHa routines are performance-eaters. That's also the main reason why I introduced the more-forgiving softlock again .


First start with posting a logfile, but I don't think its an issue with Tyrael. Probably something is broken within Tuanha's routine. Also, I've never heard of one TuanHa routine running properly without massive framedrops on hardlock ...


That's a message from the routine stating you that you should use hardlock. For now I recommend using softlock as it is much more forgiving, and post a logfile in Tuanha's topic and explain your issue there.


See above.

I have same issue using Demonic and Portal - really simple question here - does Hardlock offer dramatically higher DPS than softlock or are we talking like than 1% difference? I cant really test until Tuesday.

Its frustrating that I can get like 90FPS on ultra - but once I fire up a routine - bam - 15FPS.

Last question - big difference between 20 TPS and 30TPS? What is considered "overkill"?

 

[geneyus]

Anyone have any idea why the pause function would not be working? It was fine until a few days ago but when I did an HB update it just stopped responding entirely. Tried a brand new install and still nothing. I'm stumped.

 

[ponds2k]

@geneyus do u have teamviewer installed ? Yes ? Then pls first check if u have the teamviwer window share symbol in the wow window.
If not, ure right, i have the same probs last days but they just appear random and i have to shutdown and restart wow and honorbuddy to fix it temporary. Then sometimes it works a few hours again and sometimes only a few minutes.

 

[geneyus]

Yep that was it. Closing it and re-opening fixed it. Thanks a bunch.

 

[hazard]

The pause feature has stopped working. Please can you fix this.

 

[Stjarne]

I dont understand, somehow the Alt+x function to pause the routine iam on has stopped working.
This is making me very sad.... iam raiding in a 14/14hc guild and not be able to stop the bot with the pause functions makes the routine bad for me right now, iam not sure if its tyrael or portal routine....

Edit:
I just shut down Teamviewer, and now it works again! Puh
No uninstallation needed!

 

[RownX]

wish i could get one of those

 at TuanHA_Combat_Routine.EmulatorTree.OpenCondition(Object idCount)
   at TuanHA_Combat_Routine.Classname.TuanHA_Combat_Routine(Object idCount)

you tryed Tyrael with singular, hard/softlock?

 

[tigerlady3012]

I can`t go in the config of Tyreal anymore since the last HB Update:-(

 

[nomnomnom]

I dont understand, somehow the Alt+x function to pause the routine iam on has stopped working.
This is making me very sad.... iam raiding in a 14/14hc guild and not be able to stop the bot with the pause functions makes the routine bad for me right now, iam not sure if its tyrael or portal routine....

Edit:
I just shut down Teamviewer, and now it works again! Puh
No uninstallation needed!

Teamviewer hijacks the hotkeys, nothing I can do about unfortunately!

The pause feature has stopped working. Please can you fix this.

I can`t go in the config of Tyreal anymore since the last HB Update:-(

Got a AMD (ATI) card, or teamviewer installed?

This error now happens after every mob killed. anywhere.. i have re installed a fresh HB and reinstalled my special edition routine .

:::THIS DOES NOT HAPPEN ON LAZY RAIDER OR COMBAT BOT:::

View attachment 134957

[07:33:08.599 D] Waiting for RisingSunKickHigh1
[07:33:09.292 N] 09:277 HP: 100% Energy: 60  (0 Chi) Summit Bonestripper 3.68y 40% hp Rising Sun Kick
[07:33:09.878 D] 09:877 Trying to cast Rushing Jade Wind (116847) on Lvl 90 Horde Monk reason RushingJadeWindWWPVE1
[07:33:09.988 D] Exception was thrown in BotBase.Root.Tick
[07:33:09.990 D] System.NullReferenceException: Object reference not set to an instance of an object.
   at (Object )
   at TuanHA_Combat_Routine.Line.OpenCondition(Object idCount)
   at TuanHA_Combat_Routine.Classname.TuanHA_Combat_Routine(Int32 idCount, WoWUnit idEnabled)
   at TuanHA_Combat_Routine.Classname.TuanHA_Combat_Routine(Object idCount)
   at Styx.TreeSharp.Decorator.CanRun(Object context)
   at Styx.TreeSharp.Decorator..()
   at Styx.TreeSharp.Composite.Tick(Object context)
   at Styx.TreeSharp.PrioritySelector..()
   at Styx.TreeSharp.Composite.Tick(Object context)
   at Styx.TreeSharp.PrioritySelector..()
   at Styx.TreeSharp.Composite.Tick(Object context)
   at Styx.TreeSharp.Decorator..()
   at Styx.TreeSharp.Composite.Tick(Object context)
   at Styx.TreeSharp.PrioritySelector..()
   at Styx.TreeSharp.Composite.Tick(Object context)
   at Styx.TreeSharp.PrioritySelector..()
   at Styx.TreeSharp.Composite.Tick(Object context)
   at Styx.TreeSharp.PrioritySelector..()
   at Styx.TreeSharp.Composite.Tick(Object context)
   at Styx.CommonBot.TreeRoot.()
   at Styx.CommonBot.TreeRoot.(Action , String , Boolean )
[07:33:10.219 N] 10:197 HP: 100% Energy: 85  (0 Chi) Lvl 90 Horde Monk 0y 100% hp Rushing Jade Wind
[07:33:10.785 N] Pause Combat Routine:  Attack Out of Combat Disabled. Enable Attack Out of Combat in General Setting to remove this feature
[07:33:50.402 D] Target  Best Unit
[07:33:50.417 D] 50:417 Trying to cast Chi Wave (115098) on Summit Bonestripper reason ChiWaveSingle1
[07:33:50.678 N] 50:665 HP: 100% Energy: 100  (0 Chi) Summit Bonestripper 3.13y 100% hp Chi Wave
[07:33:51.814 D] 51:814 Trying to cast Jab (100780) on Summit Bonestripper reason JabSingle1
[07:33:52.002 N] 51:989 HP: 100% Energy: 100  (2 Chi) Summit Bonestripper 3.13y 78% hp Jab
[07:33:52.287 D] 52:287 Trying to cast Rising Sun Kick (107428) on Summit Bonestripper reason RisingSunKickHigh1
[07:33:52.287 D] Waiting for RisingSunKickHigh1
[07:33:52.327 D] 52:327 Trying to cast Rising Sun Kick (107428) on Summit Bonestripper reason RisingSunKickHigh1
[07:33:52.327 D] Waiting for RisingSunKickHigh1
[07:33:52.388 D] 52:388 Trying to cast Rising Sun Kick (107428) on Summit Bonestripper reason RisingSunKickHigh1
[07:33:52.388 D] Waiting for RisingSunKickHigh1
[07:33:52.454 D] 52:454 Trying to cast Rising Sun Kick (107428) on Summit Bonestripper reason RisingSunKickHigh1
[07:33:52.454 D] Waiting for RisingSunKickHigh1
[07:33:52.522 D] 52:522 Trying to cast Rising Sun Kick (107428) on Summit Bonestripper reason RisingSunKickHigh1
[07:33:52.522 D] Waiting for RisingSunKickHigh1
[07:33:52.588 D] 52:588 Trying to cast Rising Sun Kick (107428) on Summit Bonestripper reason RisingSunKickHigh1
[07:33:52.588 D] Waiting for RisingSunKickHigh1
[07:33:52.654 D] 52:654 Trying to cast Rising Sun Kick (107428) on Summit Bonestripper reason RisingSunKickHigh1
[07:33:52.654 D] Waiting for RisingSunKickHigh1
[07:33:52.721 D] 52:721 Trying to cast Rising Sun Kick (107428) on Summit Bonestripper reason RisingSunKickHigh1
[07:33:52.721 D] Waiting for RisingSunKickHigh1
[07:33:53.086 N] 53:074 HP: 100% Energy: 65  (0 Chi) Summit Bonestripper 3.13y 31% hp Rising Sun Kick
[07:33:53.561 D] Exception was thrown in BotBase.Root.Tick
[07:33:53.561 D] System.NullReferenceException: Object reference not set to an instance of an object.
   at (Object )
   at TuanHA_Combat_Routine.EmulatorTree.OpenCondition(Object idCount)
   at TuanHA_Combat_Routine.Classname.TuanHA_Combat_Routine(Object idCount)
   at Styx.TreeSharp.Decorator.CanRun(Object context)
   at Styx.TreeSharp.Decorator..()
   at Styx.TreeSharp.Composite.Tick(Object context)
   at Styx.TreeSharp.PrioritySelector..()
   at Styx.TreeSharp.Composite.Tick(Object context)
   at Styx.TreeSharp.PrioritySelector..()
   at Styx.TreeSharp.Composite.Tick(Object context)
   at Styx.TreeSharp.Decorator..()
   at Styx.TreeSharp.Composite.Tick(Object context)
   at Styx.TreeSharp.PrioritySelector..()
   at Styx.TreeSharp.Composite.Tick(Object context)
   at Styx.TreeSharp.PrioritySelector..()
   at Styx.TreeSharp.Composite.Tick(Object context)
   at Styx.TreeSharp.PrioritySelector..()
   at Styx.TreeSharp.Composite.Tick(Object context)
   at Styx.CommonBot.TreeRoot.()
   at Styx.CommonBot.TreeRoot.(Action , String , Boolean )
[07:33:53.589 D] Exception was thrown in BotBase.Root.Tick
[07:33:53.592 D] System.NullReferenceException: Object reference not set to an instance of an object.
   at (Object )
   at TuanHA_Combat_Routine.EmulatorTree.OpenCondition(Object idCount)
   at TuanHA_Combat_Routine.Classname.TuanHA_Combat_Routine(Object idCount)
   at Styx.TreeSharp.Decorator.CanRun(Object context)
   at Styx.TreeSharp.Decorator..()
   at Styx.TreeSharp.Composite.Tick(Object context)
   at Styx.TreeSharp.PrioritySelector..()
   at Styx.TreeSharp.Composite.Tick(Object context)
   at Styx.TreeSharp.PrioritySelector..()
   at Styx.TreeSharp.Composite.Tick(Object context)
   at Styx.TreeSharp.Decorator..()
   at Styx.TreeSharp.Composite.Tick(Object context)
   at Styx.TreeSharp.PrioritySelector..()
   at Styx.TreeSharp.Composite.Tick(Object context)
   at Styx.TreeSharp.PrioritySelector..()
   at Styx.TreeSharp.Composite.Tick(Object context)
   at Styx.TreeSharp.PrioritySelector..()
   at Styx.TreeSharp.Composite.Tick(Object context)
   at Tyrael.Tyrael.FrameLockSelector.Tick(Object context) in f:\Program Files (x86)\HB\Bots\Tyrael\Tyrael.cs:line 238
   at Styx.TreeSharp.Decorator..()
   at Styx.TreeSharp.Composite.Tick(Object context)
   at Styx.TreeSharp.PrioritySelector..()
   at Styx.TreeSharp.Composite.Tick(Object context)
   at Styx.CommonBot.TreeRoot.()
   at Styx.CommonBot.TreeRoot.(Action , String , Boolean )
[07:33:54.486 N] Pause Combat Routine:  Attack Out of Combat Disabled. Enable Attack Out of Combat in General Setting to remove this feature
[07:34:15.903 N] Stopping the bot!
[07:34:15.904 Q] Bot stopping! Reason: User pressed the stop button
[07:34:15.915 N] [Tyrael] ------------------------------------------
[07:34:15.915 N] [Tyrael] Shutdown - Performing required actions.
[07:34:15.916 N] [Tyrael] -------------------------------------------
[07:34:15.919 D] Activity: Honorbuddy Stopped

EDIT: I got the error to change. I had softlock enabled correctly but then i looked at

at Tyrael.Tyrael.FrameLockSelector.Tick(Object context) in f:\Program Files (x86)\HB\Bots\Tyrael\Tyrael.cs:line 238

that in notepad and found that it was in the softlock area. so i disabled softlock and enabled hard lock. the error changed.

Exception was thrown in BotBase.Root.Tick
System.NullReferenceException: Object reference not set to an instance of an object.
   at (Object )
   at TuanHA_Combat_Routine.EmulatorTree.OpenCondition(Object idCount)
   at TuanHA_Combat_Routine.Classname.TuanHA_Combat_Routine(Object idCount)
   at Styx.TreeSharp.Decorator.CanRun(Object context)
   at Styx.TreeSharp.Decorator..()
   at Styx.TreeSharp.Composite.Tick(Object context)
   at Styx.TreeSharp.PrioritySelector..()
   at Styx.TreeSharp.Composite.Tick(Object context)
   at Styx.TreeSharp.PrioritySelector..()
   at Styx.TreeSharp.Composite.Tick(Object context)
   at Styx.TreeSharp.Decorator..()
   at Styx.TreeSharp.Composite.Tick(Object context)
   at Styx.TreeSharp.PrioritySelector..()
   at Styx.TreeSharp.Composite.Tick(Object context)
   at Styx.TreeSharp.PrioritySelector..()
   at Styx.TreeSharp.Composite.Tick(Object context)
   at Styx.TreeSharp.PrioritySelector..()
   at Styx.TreeSharp.Composite.Tick(Object context)
   at Styx.TreeSharp.Decorator..()
   at Styx.TreeSharp.Composite.Tick(Object context)
   at Styx.TreeSharp.PrioritySelector..()
   at Styx.TreeSharp.Composite.Tick(Object context)
   at Styx.CommonBot.TreeRoot.()
   at Styx.CommonBot.TreeRoot.(Action , String , Boolean )

No quick fix, will look into it. But most of the time its the routine not finishing up their tasks properly.

 

[tigerlady3012]

Got a AMD (ATI) card, or teamviewer installed?

No I have no Teamviewer or something else and in my pc is a Nvidia Card

 

[avocadowarrior]

Is the purpose of this bot for a human to play the character to avoid mechanics but have the bot control the spell input?