Belphegor Test Release

superreeen · Aug 12, 2012

Scrubbish said:
Well when a mob dies that has molten it does that explosion. It seems about 50% on moving out of range of that explosion if it is still fighting other mobs. However once all mobs are down it completely ignores it.

What does you log say when the molten bombs are not avoided? And as I said it won't work out of combat.

UberSolidat · Aug 12, 2012

Hydra Spam

I've been having issues with Hydra being spammed within a 10ft radius of itself whenever any mobs come up. Attached is the log entries...

Issues are show in [07:00:20.206 V] through [07:00:27.728 V]

Nuok · Aug 12, 2012

UberSolidat said:
I've been having issues with Hydra being spammed within a 10ft radius of itself whenever any mobs come up. Attached is the log entries...

Issues are show in [07:00:20.206 V] through [07:00:27.728 V]

What type of hydra are you using?

UberSolidat · Aug 12, 2012

It was the Venom hydra.

Scrubbish · Aug 12, 2012

superreeen said:
What does you log say when the molten bombs are not avoided? And as I said it won't work out of combat.

Too bad we can't get it to work out of combat, but that's not a huge deal. I will get back to you on a log file for the molten explosions, what log detail level do I need to have my settings at for you to get the pertinent information? I would have it for you now, but I honestly can't remember which session it was that I was running to find that log file. I'll be botting later on tonight so I can get it for you then

superreeen · Aug 12, 2012

Scrubbish said:
Too bad we can't get it to work out of combat, but that's not a huge deal. I will get back to you on a log file for the molten explosions, what log detail level do I need to have my settings at for you to get the pertinent information? I would have it for you now, but I honestly can't remember which session it was that I was running to find that log file. I'll be botting later on tonight so I can get it for you then

In the file the log level is always diagnostic so it doesn't matter

Scrubbish · Aug 12, 2012

superreeen said:
In the file the log level is always diagnostic so it doesn't matter

good deal. On a side note I've been trying to modify the monk.cs file to only cast LTK when it is above a certain amount of spirit, but I keep screwing it up and causing errors. I tried using the code replacement that you posted previously in this thread but no luck

it was working fine until I updated to your latest version.

I changed routines\monk.cs from:

Code:

new CastOnUnit(SNOPower.Monk_LashingTailKick,
                        ctx => ((DiaUnit)ctx).ACDGuid,
                        ctx => Clusters.GetClusterCount(ZetaDia.Me, CombatTargeting.Instance.LastObjects, ClusterType.Radius, 16f) >= BelphegorSettings.Instance.Monk.LashingTailKickAoECount ||
                                Unit.IsEliteInRange(16f)),

to:

Code:

new CastOnUnit(SNOPower.Monk_LashingTailKick,
       ctx => ((DiaUnit)ctx).ACDGuid,
       ctx => ZetaDia.Me.CurrentPrimaryResource > 65 && (Clusters.GetClusterCount(ZetaDia.Me, CombatTargeting.Instance.LastObjects, ClusterType.Radius, 16f) >= BelphegorSettings.Instance.Monk.LTKAoECount || Unit.IsEliteInRange(16f))),

and got this error :

Reloading AssemblyLoader<Zeta.CommonBot.ICombat> - Initializing
[18:55:43.633 N] Compiler Error: d:\Demonbuddy\Routines\Belphegor\Routines\Monk.cs(104,193) : error CS1061: 'Belphegor.Settings.MonkSettings' does not contain a definition for 'LTKAoECount' and no extension method 'LTKAoECount' accepting a first argument of type 'Belphegor.Settings.MonkSettings' could be found (are you missing a using directive or an assembly reference?)

.cs files attached

dookiepie · Aug 12, 2012

Getting a compile error with Belph v223 on a clean install of DB v204. Will post the error in a few, restarting my PC.

Nuok · Aug 12, 2012

dookiepie said:
Getting a compile error with Belph v223 on a clean install of DB v204. Will post the error in a few, restarting my PC.

There are no compile errors for me, try upload a log.

Nuok · Aug 12, 2012

Scrubbish said:
Reloading AssemblyLoader<Zeta.CommonBot.ICombat> - Initializing
[18:55:43.633 N] Compiler Error: d:\Demonbuddy\Routines\Belphegor\Routines\Monk.cs(104,193) : error CS1061: 'Belphegor.Settings.MonkSettings' does not contain a definition for 'LTKAoECount' and no extension method 'LTKAoECount' accepting a first argument of type 'Belphegor.Settings.MonkSettings' could be found (are you missing a using directive or an assembly reference?)

Because we have no setting named LTKAoECount its LashingTailKickAoECount.

Scrubbish · Aug 12, 2012

Nuok said:
Because we have no setting named LTKAoECount its LashingTailKickAoECount.

Oh man what a derkerder moment, I should have caught that, but I just copied and pasted the code you had posted earlier and didn't notice it. Thanks! running it now to see how it works, but it did load fine.

secretbear · Aug 12, 2012

Scrubbish said:
Oh man what a derkerder moment, I should have caught that, but I just copied and pasted the code you had posted earlier and didn't notice it. Thanks! running it now to see how it works, but it did load fine.

It actually wasn't him that posted it, don't blame my terribad noob code on a DB guru

. But yeah, change the setting name and it will be sorted

dookiepie · Aug 12, 2012

[19:45:53.006 N] Compiler Error: C:\DB204\Routines\Belphegor\Belphegor.cs(126,41) : error CS0246: The type or namespace name 'BelphegorPlayerMover' could not be found (are you missing a using directive or an assembly reference?)

Edit: Alright, so, this whole time I've been deleting the contents of the Belphegor directory and extracting the new versions to it. Evidently that was wrong, because the compile error goes away if I extract this over the top of the existing Belphegor. My bad.

Scrubbish · Aug 12, 2012

OK I was watching it run and waiting to catch it not moving away from molten explosion. Log attached.

Scrubbish · Aug 12, 2012

secretbear said:
It actually wasn't him that posted it, don't blame my terribad noob code on a DB guru . But yeah, change the setting name and it will be sorted

LOL@ME for a double derkerder!

Scrubbish · Aug 12, 2012

Ok so I noticed something and i don't know if it can be fixed or not.

Avoidance is moving away from the point that an arcane guardian is spawned, however it will routinely run through another arcane guardian to do that. Is there anything that can be done with that or is it one of those things that would chew up too much system resources to try and track, or is there not data stream that DB would be able to plug into to track it?

secretbear · Aug 12, 2012

Scrubbish said:
OK I was watching it run and waiting to catch it not moving away from molten explosion. Log attached.

I'm getting the same errors you are getting when this happens for you. I'm not sure when exactly during what activity the errors appear in my log though

Code:

System.AccessViolationException: Could not read bytes from 00000000 [299]!
   at Zeta.MemoryManagement.ExternalProcessReader.ReadBytes(IntPtr address, Int32 count, Boolean isRelative)
   at Zeta.MemoryManagement.ExternalProcessReader.Read[T](IntPtr address, Boolean isRelative)
   at Zeta.Internals.Actors.DiaObject.()
   at Zeta.Internals.Actors.DiaObject.get_Position()
   at Belphegor.Routines.Monk.<MonkCombat>b__7(DiaUnit u)
   at System.Linq.Enumerable.FirstOrDefault[TSource](IEnumerable`1 source, Func`2 predicate)

So I'm assuimg the error occurs in this call:

Code:

new PrioritySelector(ctx => CombatTargeting.Instance.LastObjects.OfType<DiaUnit>().FirstOrDefault(u => !u.Position.IsCollidingWithAoe() || u.Position.DistanceSqr

(ZetaDia.Me.Position) < BelphegorSettings.Instance.Monk.MaximumRange * BelphegorSettings.Instance.Monk.MaximumRange),

Something went wrong there?

Edit: tried a fresh unmodified install, same errors appearing in log.

superreeen · Aug 13, 2012

secretbear said:

I'm getting the same errors you are getting when this happens for you. I'm not sure when exactly during what activity the errors appear in my log though

Code:

System.AccessViolationException: Could not read bytes from 00000000 [299]!
   at Zeta.MemoryManagement.ExternalProcessReader.ReadBytes(IntPtr address, Int32 count, Boolean isRelative)
   at Zeta.MemoryManagement.ExternalProcessReader.Read[T](IntPtr address, Boolean isRelative)
   at Zeta.Internals.Actors.DiaObject.()
   at Zeta.Internals.Actors.DiaObject.get_Position()
   at Belphegor.Routines.Monk.<MonkCombat>b__7(DiaUnit u)
   at System.Linq.Enumerable.FirstOrDefault[TSource](IEnumerable`1 source, Func`2 predicate)

So I'm assuimg the error occurs in this call:

Code:

new PrioritySelector(ctx => CombatTargeting.Instance.LastObjects.OfType<DiaUnit>().FirstOrDefault(u => !u.Position.IsCollidingWithAoe() || u.Position.DistanceSqr

(ZetaDia.Me.Position) < BelphegorSettings.Instance.Monk.MaximumRange * BelphegorSettings.Instance.Monk.MaximumRange),

Something went wrong there?

Edit: tried a fresh unmodified install, same errors appearing in log.

Will be fixed in the next test release.

Nuok · Aug 13, 2012

dookiepie said:
[19:45:53.006 N] Compiler Error: C:\DB204\Routines\Belphegor\Belphegor.cs(126,41) : error CS0246: The type or namespace name 'BelphegorPlayerMover' could not be found (are you missing a using directive or an assembly reference?)

Maybe i missed the file when i was zipping it.

superreeen said:
Will be fixed in the next test release.

Uppped

MewB5V37 · Aug 13, 2012

Well here's my wish list regarding Belphegor:

First off...absolutely fantastic on my characters so far. The only things I'm looking for are avoidance issues:

Grotesque when killed need an avoidance.
Molten when killed need an avoidance.

I don't know if it's possible but their death explosions are...insane on inferno.

Belphegor Test Release

Member

New Member

Attachments

Community Developer

New Member

New Member

Member

New Member

Attachments

New Member

Community Developer

Community Developer

New Member

New Member

New Member

New Member

Attachments

New Member

New Member

New Member

Member

Community Developer

New Member