What's new
  • Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • Visit Resources
  • Visit Downloads
  • Visit Portal

[Azyul Project] Dungeon Farming, Gold Farming, Mount Farming, Transmog Farming, and more!

Hey,

i have a problem if my chars try to sell to a repair guy called Nagojut. He is on a boat and i always see that my chars died in the water/next to the boat because they try to fly after the boat.

Do you have any solutions for that? Thanks a lot!
I'll need to know which profile you're using. And if the profile is a Randomizer, which dungeon the bot was running.



so erm, outlands are broken... REALLY broken just randomly flys off the map and dying
The only time it would ever do this is if you die while inside of a dungeon - as posted throughout the thread and on the original thread, there's no death support.
A death support method has been created, but it hasn't been standardized into the profiles.
 
i understand that but i've tested this in Eastern Kingdoms Kal(the other one u know) northrend AND Panda land and they dont fly to a portal or a flight point, they just fly.. away
 
i understand that but i've tested this in Eastern Kingdoms Kal(the other one u know) northrend AND Panda land and they dont fly to a portal or a flight point, they just fly.. away
The universal navigation code is about 2+ years old, so some of the navigation methods aren't really 'preferred' these days.
It's currently scheduled to be re-built and improved.
 
Hello, first off, thanks a lot for the amount of work you put into this. These are great great great great profiles.

I've been running Drak for a couple weeks now without issue, but I recently switched a couple of my bots over to HoL. I sometimes run into the issue where after running in, (Before the first pull), they claim to have an issue getting to a certain coordinate, then just start strafing into a wall until I stop/restart the bot. (Like, click stop, then start again, so it runs out)

I think this issue may have something to do with lag I sometimes get, can I modify the profile to wait 10s rather than 5s before initiating?
 
Hello, first off, thanks a lot for the amount of work you put into this. These are great great great great profiles.

I've been running Drak for a couple weeks now without issue, but I recently switched a couple of my bots over to HoL. I sometimes run into the issue where after running in, (Before the first pull), they claim to have an issue getting to a certain coordinate, then just start strafing into a wall until I stop/restart the bot. (Like, click stop, then start again, so it runs out)

I think this issue may have something to do with lag I sometimes get, can I modify the profile to wait 10s rather than 5s before initiating?
I had that before on a lagspike - the bot didn't recognize entering the portal - basicly it didn't get the memo to go furter with the code so it tries to go to the instance portal entry coördinate from inside which is impossible and bugs out trying to get there.
 
Last edited:
hey echo, thank you so much for the profiles they have been great, i wanted to know if it was possible to not mail at all? and only use the guild bank for all gold + cloth?, i know you have a gundrak profile that will guild bank all gold and cloth, is that profile a heavy pull? because i see my GPH drop when i use a Heavy Pull (R-Gundrak + Drakeon Keep) Vs Gundrak - Mobile Bank all cloth + gold. Thank you
 
Hello, first off, thanks a lot for the amount of work you put into this. These are great great great great profiles.

I've been running Drak for a couple weeks now without issue, but I recently switched a couple of my bots over to HoL. I sometimes run into the issue where after running in, (Before the first pull), they claim to have an issue getting to a certain coordinate, then just start strafing into a wall until I stop/restart the bot. (Like, click stop, then start again, so it runs out)

I think this issue may have something to do with lag I sometimes get, can I modify the profile to wait 10s rather than 5s before initiating?
I'll modify it to wait until it detects that the bot is inside of the dungeon.
The loading code for this dungeon specifically waits 5 seconds, then loops 1 second while your game is loading.

The only time it wouldn't work is if it takes more than 5 seconds for your game to actually start loading (any presence of the blue in the loading bar.)
If there isn't any 'movement' in the loading bar, then the game will still say that you're not loading even though the loading screen is up.




hey echo, thank you so much for the profiles they have been great, i wanted to know if it was possible to not mail at all? and only use the guild bank for all gold + cloth?, i know you have a gundrak profile that will guild bank all gold and cloth, is that profile a heavy pull? because i see my GPH drop when i use a Heavy Pull (R-Gundrak + Drakeon Keep) Vs Gundrak - Mobile Bank all cloth + gold. Thank you
If the profile is in the 'Heavy Pull' folder, then it's a heavy pull.

Gundrak is a higher GPH run than Drak'tharon is.
So naturally you'll get more GPH from Gundrak than you will from the Gundrak+Drak'tharon randomizer profile.
Not only that, when the profile randomizes to the opposite dungeon (Gundrak -> Drak'tharon -> Gundrak) your GPH will also go down due to the travel time.

Profiles will only resort to going to the mailbox if you're running out of bagslot space.
Usually any profile marked 'Extras' profiles will use custom scripts to sell everything, that way the bot will never need to go to the mailbox.
 
Last edited:
I'll need to know which profile you're using. And if the profile is a Randomizer, which dungeon the bot was running.
Lol...sure, sorry. Gundrak Medium Pulls, with the "sells everything" option, no randomizer.
 
Yes...so it needs to repair before the normal sell-run.
As posted throughout the thread and on the original post, there's no death support for the dungeons because Honorbuddy's death routine isn't designed for it.
If the pull is too much for your character to handle, then try using a lower pull density.

However, a death-support method has been created, but it hasn't been standardized yet.
Currently the [AM-Alpha]Gundrak profile has the death support, you could try it.
 
Tried out your "DD Grim Batol Heavy pull" profile on my druid and have some issues that i wish to report.

When using cat form (run speed slightly increased) ive encountered errors where my toon falls from one of the bridges and sometimes runs in circles to reach a certain hotspot. I imagine this is due to the fact that druid cats have a 25% speed increase and a 44% increase when talented. I respecced to guardian and went bear form (normal running speed) and these problems went away so its not really a big deal for me, but i reckon some people dont have a guardian spec :) Also, the falling of the bridge issues does not occur every time and are random. I think its due to the fact that when it runs over the bridge there are small dents and lumps on the hotspot location causion the bot to kinda "fly off".

Second issue: well its not really an issue its more of a lack of killing. At the very end of the profile, the bot gathers the last two packs before it returns to the entrance, but it skips a pack of dragonkin that are just inside the tunnel that leads to the last boss (erudax). I dont know if this is a pull distance thing or what, and ill have a closer look at it later on tonight.

Third issue: this also occurs on random. After its finished killing everything and runs back it encounters a hotspot issue when moving up the stairs when trying to enter the trogg room at the very beginning of the instance (the yellow hotspot is set in midair and not on the stairs). It waits a good deal and then continues to move or waits until you move it manually.

All-in-all though very good work and i enjoy running your profiles a lot :)

If you need a log i'll add one in later as i'm on a different computer right now.
 
Tried out your "DD Grim Batol Heavy pull" profile on my druid and have some issues that i wish to report.

When using cat form (run speed slightly increased) ive encountered errors where my toon falls from one of the bridges and sometimes runs in circles to reach a certain hotspot. I imagine this is due to the fact that druid cats have a 25% speed increase and a 44% increase when talented. I respecced to guardian and went bear form (normal running speed) and these problems went away so its not really a big deal for me, but i reckon some people dont have a guardian spec :) Also, the falling of the bridge issues does not occur every time and are random. I think its due to the fact that when it runs over the bridge there are small dents and lumps on the hotspot location causion the bot to kinda "fly off".

Second issue: well its not really an issue its more of a lack of killing. At the very end of the profile, the bot gathers the last two packs before it returns to the entrance, but it skips a pack of dragonkin that are just inside the tunnel that leads to the last boss (erudax). I dont know if this is a pull distance thing or what, and ill have a closer look at it later on tonight.

Third issue: this also occurs on random. After its finished killing everything and runs back it encounters a hotspot issue when moving up the stairs when trying to enter the trogg room at the very beginning of the instance (the yellow hotspot is set in midair and not on the stairs). It waits a good deal and then continues to move or waits until you move it manually.

All-in-all though very good work and i enjoy running your profiles a lot :)

If you need a log i'll add one in later as i'm on a different computer right now.
The DD farm version of Grim Batol is depreciated and hasn't been updated in almost 2 years.
:3



The updated versions are in the Optimized Gold Farms -> Dungeons -> Cataclysm -> [Medium or Lite Pulls] ->
If you haven't updated your SVN recently, then they're in Optimized Gold Farms -> Cataclysm -> [Medium or Lite Pulls] ->

The current DD Heavy pull has been demoted to 'Medium' pull.
A heavier version is being created.
 
Last edited:
oh wow, now i feel quite stupid, never even noticed as i always go on to heavy pulls :)

cheers for the fast reply though !
 
Hey Echo,

first, very nice profiles :) Tyvm ;)

One question. (sry for my bag english) It would be very nice if the bags are full, that the bot can use hearthstone.

I use the light pulls saron profile:northend->light pulls->Pit of Saron keep Frostweave
 
Hey Echo,

first, very nice profiles :) Tyvm ;)

One question. (sry for my bag english) It would be very nice if the bags are full, that the bot can use hearthstone.

I use the light pulls saron profile:northend->light pulls->Pit of Saron keep Frostweave
A profile could be created for that, but it'll be later tonight before I can get a chance to make it.
 
Is there any way to for AM profile settings to save if honorbuddy restarts?
 
Is there any way to for AM profile settings to save if honorbuddy restarts?
Sorry for the delay, I just got home.

If you open the profile up, you should see documentation on how to set defaults.
The variables are named strangely, so it can be confusing.
 
Back
Top