What's new
  • Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • Visit Resources
  • Visit Downloads
  • Visit Portal

ArchaeologyBuddy - An Archaeology Bot

Status
Not open for further replies.
Is there any way to set Archaeologybuddy so that it wont repair?
I'm having the problem that Honorbuddy can't decide wehter to keep digging or to go & repair.

Grind bot settings — find vendors automatically.
 
This keeps getting stuck flying from the south the Grove of Aessina in Mount Hyjal. It gets to about 1/2 up the mountain then flies around in a really small circle like its trying to find the shortest route. I've been just manually moving it to the digsite and restarting the bot. I'm relatively new to this so I don't know which log(Log/Debug Log/Navigator Log) I might need to upload if any.
 
Arch buddy as of .0466 is a useless piece of crap that is entirely un-afkable. Even if i were to blacklist the sites in EPL (terrorweb tunnel/Plaguewood) where the bot hovers aimlessly above digsites, it still crashes between two and 3 hours in. Unless I am at my pc to somtimes restart HB or even to the extreme, close wow and HB then restart, the bot will not function. It is truly a shame to see what was the most fantastic addition of HB prior to 4.06 wow patch become by far the most useless addition to date. Please, who ever you are make what was once wonderful work again. I will pay you.

It runs just fine for me.

You need to whine less and tweak more.
 
Ok I have a problem where it tries to solve or checks to solve and gets stuck in a loop (I know this because I had the solve window open at the time and saw it swapping back and forth from once race to another). I am attaching the file but here is a snippet:

[10:48:18 PM:464] Cleared POI
[10:48:19 PM:999] System.NullReferenceException: Object reference not set to an instance of an object.
at Styx.Logic.MountHelper.MountWrapper..ctor(Int32 slot)
at Styx.Logic.MountHelper.get_Mounts()
at Styx.Logic.MountHelper.get_FlyingMounts()
at Bots.ArchaeologyBuddy.ArchBuddy.MountStuff.get_FlyingMount()
at Bots.ArchaeologyBuddy.ArchBuddy.MountStuff.MountUp()
at Styx.Logic.Pathing.Flightor.MoveWithTrace(WoWPoint destination, Single minHeight)
at Styx.Logic.Pathing.Flightor.MoveWithTrace(WoWPoint destination)
at Bots.ArchaeologyBuddy.ArchBuddy.<MoveToDigsiteBehavior>b__35(Object )
at TreeSharp.Action.RunAction(Object context)
at TreeSharp.Action..MoveNext()
at TreeSharp.Composite.Tick(Object context)
at TreeSharp.Decorator..MoveNext()
at TreeSharp.Composite.Tick(Object context)
at TreeSharp.PrioritySelector..MoveNext()
at TreeSharp.Composite.Tick(Object context)
at Styx.Logic.BehaviorTree.TreeRoot.()
[10:48:19 PM:999] Cleared POI - Reason Exception in Root.Tick()
[10:48:19 PM:999] Cleared POI
[10:48:21 PM:538] System.NullReferenceException: Object reference not set to an instance of an object.
at Styx.Logic.MountHelper.MountWrapper..ctor(Int32 slot)
at Styx.Logic.MountHelper.get_Mounts()
at Styx.Logic.MountHelper.get_FlyingMounts()
at Bots.ArchaeologyBuddy.ArchBuddy.MountStuff.get_FlyingMount()
at Bots.ArchaeologyBuddy.ArchBuddy.MountStuff.MountUp()
at Styx.Logic.Pathing.Flightor.MoveWithTrace(WoWPoint destination, Single minHeight)
at Styx.Logic.Pathing.Flightor.MoveWithTrace(WoWPoint destination)
at Bots.ArchaeologyBuddy.ArchBuddy.<MoveToDigsiteBehavior>b__35(Object )
at TreeSharp.Action.RunAction(Object context)
at TreeSharp.Action..MoveNext()
at TreeSharp.Composite.Tick(Object context)
at TreeSharp.Decorator..MoveNext()
at TreeSharp.Composite.Tick(Object context)
at TreeSharp.PrioritySelector..MoveNext()
at TreeSharp.Composite.Tick(Object context)
at Styx.Logic.BehaviorTree.TreeRoot.()
[10:48:21 PM:538] Cleared POI - Reason Exception in Root.Tick()
 

Attachments

Arch buddy as of .0466 is a useless piece of crap that is entirely un-afkable. Even if i were to blacklist the sites in EPL (terrorweb tunnel/Plaguewood) where the bot hovers aimlessly above digsites, it still crashes between two and 3 hours in. Unless I am at my pc to somtimes restart HB or even to the extreme, close wow and HB then restart, the bot will not function. It is truly a shame to see what was the most fantastic addition of HB prior to 4.06 wow patch become by far the most useless addition to date. Please, who ever you are make what was once wonderful work again. I will pay you.

Yeah it finally works for me again. Had to wait for several versions to come out to do it but at least i didnt piss and moan like chris123. Dude unless your going to post your logs and ask for help noone cares what you think. Stop QQing and tell them something that might actually help them figure out what your problem is. Crying on the forums will do nothing for you.
 
Problem...reporting

Kinda dislike time wasting, let's start

1 minor problem

In 12 Feb 2011 Two new Nerubian sites added to Eastern Plaguelands: Terrorweb Tunnel Digsite and Plaguewood Digsite.

The Terrorweb Tunnel Digsite is stuck whenever it spawns and the character is heading there, and the character just seems like flying left and right stuck in the middle of Eastern Plaguelands.

Not sure about Plaguewood Digsite, since I didn't know if it was spawned didn't check the log yet

Manuel Solution:
Black list it!

Suspected Reasons:
New digsite setting is not perfect yet.


1 Major problem:

#1
When the character finished digging, jump onto the flying mount, it's sometimes cannot go straight up immediately or somehow staying about 1 to 3fts near the ground, at that point of time, if a mob was aggroed, the bot stucks, no error msg, but it stops.

Manual Solution:
I have to manually let it goes back to the ground (press x), then the bot works again, it hits the mob and then back on to the flying mount.

Suspected Reasons:
May caused by the mod @ 1.1.0.100 - Combat, loot and vendor behaviors will no longer be called while the toon is flying. Please set the chracter to leave the combat by flying away, if combat and flying mounted is happening at the same time.
 
I am having the exact same problems with the same site and with the flying. It also pauses before landing for about the same amount of time before it dismounts allowing it to grab aggro and eventually dieing.
 

Attachments

In 2.0.0.4053 AB worked very well, only sometimes was an error and a full stop (Memory leak in HB).
In 2.0.0.4066 and 4075 AB was an old problem, he doesn't fly in a digsite area (simple hover near digs). I searched for errors in logs, but there anything suspicious isn't present (just fly to digsite).

Everybody had similar problems?
 
Arch buddy as of .0466 is a useless piece of crap that is entirely un-afkable. Even if i were to blacklist the sites in EPL (terrorweb tunnel/Plaguewood) where the bot hovers aimlessly above digsites, it still crashes between two and 3 hours in. Unless I am at my pc to somtimes restart HB or even to the extreme, close wow and HB then restart, the bot will not function. It is truly a shame to see what was the most fantastic addition of HB prior to 4.06 wow patch become by far the most useless addition to date. Please, who ever you are make what was once wonderful work again. I will pay you.

I have been afk since Sunday night....
 
yup it defiantly gets stuck hovering over terrorweb tunnels, please please fix it so that we can farm zin rokhs again ^_^;
 
For example, now I have trouble in "Terrorweb Tunnel Digsite". AB simple hover near digsite.
 
The bot also automatically tries to run(unmounted) to the closest repair npc.. I keep disabling find vendors automatically but it always clicks it back on, very annoying.
 
I am at work so I will post logs later but I am having a problem in Mt Hyjal where there is a survey point in a small stone hut and the bot won't dismount and run in, it keeps using its unstuck behaviour to fly down through the stone roof of the hut.
 
I have been afk since Sunday night....

Can you tell us what continent you're running it on and what sites you have blacklisted? AB is pretty stable for me but I usually have to still intervene for whatever reason 2-3 times per day.
 
Anyone else having a problem with auto solving using keystones, seems to just stand there till I solve it myself?
 
Anyone else having a problem with auto solving using keystones, seems to just stand there till I solve it myself?

Are you using the lastest version of HB? Have you checked the Bot settings? I have had no trouble with this feature for a couple versions.
 
Status
Not open for further replies.
Back
Top