Apsal'ara @ Singular

strix · Dec 15, 2011

Techz said:
Wanted to test this out with combat but all i get once i try and load HB is

File: Line: 0 Error: Resource identifier 'ConfigurationForm.resources' has already been used in this assembly

Any help please

You need to delete former Singular folder entirely before installing this one.

drkripper said:
When using this in bgs it occasionally stops moving correctly, it stops and inches toward an enemy instead of running towards them. Any ideas?

Give log please.

timoneg said:
[Singular] Can't determine encounter type, target invalid or friendly.
in party-bot my rogue sometimes stops. What is that?

This message is thrown even during milliseconds while swapping targets, please post full log and say when exactly it stopped.

drkripper · Dec 15, 2011

Here is my log. I noticed 2 areas of interest:

The first one it stutter stepped once then continued ok:

[9:13:05 AM:862] System.NullReferenceException: Object reference not set to an instance of an object.
at Singular.ClassSpecific.Rogue.Commons.ImBehind(WoWUnit unit, Double arcBehind) in d:\hb\CustomClasses\Singular\ClassSpecific\Rogue\Commons.cs:line 365
at Singular.ClassSpecific.Rogue.Commons.ImSafelyBehind(WoWUnit unit) in d:\hb\CustomClasses\Singular\ClassSpecific\Rogue\Commons.cs:line 360
at Singular.ClassSpecific.Rogue.Subtlety.<CreateComboGen>b__2f(Object ret) in d:\hb\CustomClasses\Singular\ClassSpecific\Rogue\Subtlety.cs:line 243
at TreeSharp.Decorator.CanRun(Object context)
at TreeSharp.Decorator.#h.#nF.MoveNext()
at (Object )
at TreeSharp.Composite.Tick(Object context)
at TreeSharp.PrioritySelector.#h.#nF.MoveNext()
at (Object )
at TreeSharp.Composite.Tick(Object context)
at TreeSharp.Decorator.#h.#nF.MoveNext()
at (Object )
at TreeSharp.Composite.Tick(Object context)
at TreeSharp.PrioritySelector.#h.#nF.MoveNext()
at (Object )
at TreeSharp.Composite.Tick(Object context)
at TreeSharp.Decorator.#h.#nF.MoveNext()
at (Object )
at TreeSharp.Composite.Tick(Object context)
at TreeSharp.PrioritySelector.#h.#nF.MoveNext()
at (Object )
at TreeSharp.Composite.Tick(Object context)
at TreeSharp.Switch`1.#h.#TF.MoveNext()
at (Object )
at TreeSharp.Composite.Tick(Object context)
at TreeSharp.PrioritySelector.#h.#nF.MoveNext()
at (Object )
at TreeSharp.Composite.Tick(Object context)
at TreeSharp.PrioritySelector.#h.#nF.MoveNext()
at (Object )
at TreeSharp.Composite.Tick(Object context)
at TreeSharp.Decorator.#h.#nF.MoveNext()
at (Object )
at TreeSharp.Composite.Tick(Object context)
at TreeSharp.PrioritySelector.#h.#nF.MoveNext()
at (Object )
at TreeSharp.Composite.Tick(Object context)
at TreeSharp.PrioritySelector.#h.#nF.MoveNext()
at (Object )
at TreeSharp.Composite.Tick(Object context)
at TreeSharp.PrioritySelector.#h.#nF.MoveNext()
at (Object )
at TreeSharp.Composite.Tick(Object context)
at TreeSharp.Decorator.#h.#nF.MoveNext()
at (Object )
at TreeSharp.Composite.Tick(Object context)
at TreeSharp.PrioritySelector.#h.#nF.MoveNext()
at (Object )
at TreeSharp.Composite.Tick(Object context)
at Styx.Logic.BehaviorTree.TreeRoot.Tick()

But here is where it really gets stuck:

[9:15:11 AM:835] Changed POI to:Type: Kill, Name: Upnsmokee
[9:15:11 AM:966] Activity: Apsal'ara r128 -> Subtlety -> Pull -> PvP
[9:15:12 AM:038] Activity: Apsal'ara r128 -> Subtlety -> Combat -> PvP
[9:15:12 AM:777] Activity: Apsal'ara r128 -> Subtlety -> Pull -> PvP
[9:15:12 AM:844] Activity: Apsal'ara r128 -> Subtlety -> Combat -> PvP
[9:15:13 AM:649] Activity: Apsal'ara r128 -> Subtlety -> Pull -> PvP
[9:15:13 AM:708] Activity: Apsal'ara r128 -> Subtlety -> Combat -> PvP
[9:15:14 AM:553] Activity: Apsal'ara r128 -> Subtlety -> Pull -> PvP
[9:15:14 AM:614] Activity: Apsal'ara r128 -> Subtlety -> Combat -> PvP
[9:15:15 AM:421] Activity: Apsal'ara r128 -> Subtlety -> Pull -> PvP
[9:15:15 AM:486] Activity: Apsal'ara r128 -> Subtlety -> Combat -> PvP
[9:15:16 AM:131] Activity: Apsal'ara r128 -> Subtlety -> Pull -> PvP
[9:15:16 AM:194] Activity: Apsal'ara r128 -> Subtlety -> Combat -> PvP
[9:15:16 AM:323] [STUCK] Got stuck at <1314.47, 1446.082, 322.3942> on map 489
[9:15:16 AM:355] [STUCK][HITTEST] LD/LU: False
[9:15:16 AM:355] [STUCK][HITTEST] Left: False
[9:15:16 AM:355] [STUCK][HITTEST] RD/RU: False
[9:15:16 AM:355] [STUCK][HITTEST] Right: False
[9:15:16 AM:355] [STUCK][HITTEST] Behind: False
[9:15:16 AM:355] [STUCK][HITTEST] Behind Left: False
[9:15:16 AM:355] [STUCK][HITTEST] Behind Right: False
[9:15:17 AM:484] [STUCK] Jumping worked!

Edit: I should add that this was in an open area of WSG, definitely not stuck on terrain in any way.

View attachment 12-15-2011_9_08 AM 2604 Log.txt

Zodder · Dec 17, 2011

this cc is a bit of a joke, been running it a few hours of AV and its jumping all over the place when engaging in combat causing it to fall of ledges and down hills, eg when in a tower or bunker.
I've set it to always be behind target and it seems its running through the target to get behind, but it overshoots the distance and runs another 5-10 yards witch causing the clownish behaviour with it falling of as stated above.

Mirage · Dec 17, 2011

Finally had time to run my rouge again. Newest vesion of Apsal'ara still going as strong as last time I used it a few months back.
I try using Mixed Mode with Grinding/Bgbot in Sub-Spec and have encountered a problem. Often the class tries to backstab while standing in front of the mob.
Log-Window stays at

[Singular] Casting Backstab on Wache von Neferset

Debug-Window spams

[03:10:48:348] Spell_C::CastSpell(53, 0, 0xF530B50400049433, 0) [1568]

until Mob is down because of White-hits or I stop it. It will not cast anything except defensive cooldowns.
In the bottom its correct as "Subletly -> Combat -> Solo".
Maybe disable backstab completely for solo combat?

/e: using svn-build

shovelhead · Dec 17, 2011

been using this CC for a few eeks now with a combat rogue and it kicks ass for me. usually at the top of the DPS meter. Haven't tried it in other specs though.

strix · Dec 18, 2011

I probably won't have much time to fix things till new year, i uploaded my current version to SVN, not really sure what is fixed there and what is not.

izzy · Dec 18, 2011

If theres anyone using this CC and having problems with it applying your poisons to your weapons make these 2 macro's.

Just run that sucker once to start :

/run if not yyz then yyz=CreateFrame("Frame")yyz:RegisterEvent("REPLACE_ENCHANT")yyz:SetScript("OnEvent",ReplaceEnchant)end

to stop :

/run yyz:UnregisterEvent("REPLACE_ENCHANT")

edit: This is to bypass the confirmation box you get when trying to reapply poisons to your weapons. By running this macro it will bypass ALL!! confirmation boxes so be CAREFUL!!! plzs.

Dizzle_ · Dec 21, 2011

shovelhead said:
been using this CC for a few eeks now with a combat rogue and it kicks ass for me. usually at the top of the DPS meter. Haven't tried it in other specs though.

Same here, it's an awesome profile. I'm almost always one of the top 3 in LFR. There are a few problems in pvp like the moving a few steps at a time, like mentioned above though.

marcoman · Dec 21, 2011

how can i turn off Feint
I need to use it manual on first boss in DS and have it on CD...
can you pleases make it so i can turn off, or what lines i need to comment out.
thx

strix · Dec 21, 2011

marcoman said:
how can i turn off Feint
I need to use it manual on first boss in DS and have it on CD...
can you pleases make it so i can turn off, or what lines i need to comment out.
thx

Added into settings on SVN version

aeus · Dec 24, 2011

Very nice CC !

But I have one question.

Is it possible to pick out "Stealth when Idle" and put it in default Singular. And if so, which of the files do I haveto edit to accomplish this?

I think some of the combat routines in default Singular (when questing) works better but yours works better in dungeons thats why I want to edit the default one.

strix · Dec 24, 2011

when i have time to make some nice targeting it will be merged with default singular

aeus · Dec 24, 2011

strix said:
when i have time to make some nice targeting it will be merged with default singular

Ok cool thanks.

wn2142 · Dec 24, 2011

strix said:
Added into settings on SVN version

Strix this is the best combat routine I've run so far but is there a way I can use your most current rogue routine with the zero-day Singular releases? I have a lot of other classes that need the latest updates. Right now I have to maintain two Singular directories, and juggle them in and out of the CustomClasses folder whenever I want to run different toons. Any advise is greatly appreciated... And great work on this CC.

banme · Dec 25, 2011

wn2142 said:
Right now I have to maintain two Singular directories, and juggle them in and out of the CustomClasses folder whenever I want to run different toons. Any advise is greatly appreciated....

You could have 2 Honor Buddy Install Folders, named for what you want to use them for. I keep a single Folder for meshes, and a single folder for profiles, and several HB install folders for various things, including different versions of Singular. You dont even have to go through setting it all up again, HB works when you just copy it to another folder.

wn2142 · Dec 25, 2011

That doesn't work so well, I use a lot of shortcuts, SVN pointers, etc. Basically what I was asking is when will the CC get merged with Singular or, if possible, how can I do it myself...

HB3783U58 · Dec 25, 2011

when i try use SVN i got this error i dunno if i'm using somthing wrong or what can you plz help me with it .

Command: Export
Error: Unable to connect to a repository at URL
Error: 'http://svn.code.sf.net/p/apsalar/svn/trunk'
Error: OPTIONS of 'http://svn.code.sf.net/p/apsalar/svn/trunk': could not connect to
Error: server (http://svn.code.sf.net)
Completed!:

strix · Dec 25, 2011

wn2142 said:
Strix this is the best combat routine I've run so far but is there a way I can use your most current rogue routine with the zero-day Singular releases? I have a lot of other classes that need the latest updates. Right now I have to maintain two Singular directories, and juggle them in and out of the CustomClasses folder whenever I want to run different toons. Any advise is greatly appreciated... And great work on this CC.

Get new SVN version (r131), i changed namespace and CC name so you can have it along with original singular, just name the folder differently (shouldn't matter how you name it).

HB3783U58 said:
when i try use SVN i got this error i dunno if i'm using somthing wrong or what can you plz help me with it .

Command: Export
Error: Unable to connect to a repository at URL
Error: 'http://svn.code.sf.net/p/apsalar/svn/trunk'
Error: OPTIONS of 'http://svn.code.sf.net/p/apsalar/svn/trunk': could not connect to
Error: server (http://svn.code.sf.net)
Completed!:

check your firewalls, proxies etc.

I'm not sure if it's the case, but are you using "Checkout" for downloading it? You seem to try to use Export which is completely different command.

HB3783U58 · Dec 26, 2011

[
check your firewalls, proxies etc.

I'm not sure if it's the case, but are you using "Checkout" for downloading it? You seem to try to use Export which is completely different command.[/QUOTE]

it work now but i cant see the Singular on the Class Config when i loging from HB.

strix · Dec 26, 2011

post HB log

Apsal'ara @ Singular

New Member

New Member

New Member

New Member

New Member

New Member

Member

New Member

Member

New Member

Member

New Member

Member

Member

Member

Member

Member

New Member

Member

New Member