What's new
By:
  • Visit Rebornbuddy
  • Visit Resources
  • Visit API Documentation
  • Visit Downloads
  • Visit Portal
  • Visit Panda Profiles
  • Visit LLamamMagic

[Act 1 Weeping Hollow] Safe == Efficient Farm (High MP)

Very nice your profile, testing it now, for while I am getting:

800-850 Gold/hour
65-70 Mill Exp/hour
iLlvl 63 = 110 +/- hour
iLlvl 62 = 250 +/- hour
iLlvl 61 = 380 +/- hour

Archon Wiz Running MP4, thinking to test mp5-6...

My trinity isnt like yours, this is the unique difference, but not so much different to :)
 
It's the best profile but doesn't work anymore, it says something about loading profile, and demonbuddy not being able to reas the xml file.
 
Lipie said:
Any idea why the skorn WW build is doing better ?
Click to expand...

i don't see him mentioning WW build? But Skorn has higher output damage with Rend compared to dualwield barb. At least thats what barbs use on MP10.
 
spitfireqt said:
It's the best profile but doesn't work anymore, it says something about loading profile, and demonbuddy not being able to reas the xml file.
Click to expand...
I'm not sure what is your problem but my profile still work well with me, hope you can send me your log and see. Thx.
 
Lipie said:
This is a pretty amazing profile, with a mediocre barb (150k unbuffed) , i'm getting 900iph/45mill xp per hour.

Now the main problem for me is the very latest version of trinity, for some reason he is really wasting a lot of times on elites, while I did enable the 'ignore elites' checkbox. Is this a trinity problem ? Was the previous version better ?
Click to expand...
I think this happened because of the character going to use town portal to repair item/clear bag and trinity will clear the surround area until there are no more mobs.

Lipie said:
So this runs great (60m xp/hour , 1100IPH) until ! the bot decides to start wasting huge amounts of time. Going after single solo mobs, NOT ignoring single elites, etc... Dropping down to about 750IPH. My settings are correct, it's just some weird behaviour
Click to expand...
Same situation as above, bot will clear the surround area no matter it is trash mob/elites.
 
The problem is that with this profile diablo crashes too often, it happens while using simple follow, the leader start a new game, and sometimes someone crashes.
 
Last edited:
spitfireqt said:
[21:51:33.470 N] Demonbuddy v1.0.1439.312 started
[21:51:33.513 N] Logging in...
[21:51:34.162 N] Attached to Diablo III with pid: 11628
[21:51:35.481 N] Failed to load profile: Element SafeMoveTo is not supported. Please check your XML and try again. (<SafeMoveTo questId="1" x="2872.228" y="2554.582" z="0.5997883" name="Moving" pathPrecision="10" />) Line 14
[21:51:36.459 N] Chose Trinity as your combat routine.

It also crashes often before starting a new game.
Click to expand...

Couple of things. It's telling you to enable Trinity. Go to the plugins tab in DB and make sure it's checked. Yes, I know, you already have it checked, but go make sure. Sometimes DB does a weird thing where it un-checks it.

Shutdown and restart DB. That may fix it. If that doesn't work, go into your DB folder and delete the CompiledAssemblies folder. See if any of those 3 things help.

Edit: Also, if you don't have it, go get the latest build of the Quest Tools plugin and enable it as well.
 
Last edited:
Frodo1014 said:
Couple of things. It's telling you to enable Trinity. Go to the plugins tab in DB and make sure it's checked. Yes, I know, you already have it checked, but go make sure. Sometimes DB does a weird thing where it un-checks it.

Shutdown and restart DB. That may fix it. If that doesn't work, go into your DB folder and delete the CompiledAssemblies folder. See if any of those 3 things help.

Edit: Also, if you don't have it, go get the latest build of the Quest Tools plugin and enable it as well.
Click to expand...

None of them worked. I did fresh new installation of everything and it still doesn't work, this problem doesn't happen all the time, just sometimes.
 
spitfireqt said:
None of them worked. I did fresh new installation of everything and it still doesn't work, this problem doesn't happen all the time, just sometimes.
Click to expand...

That's about the limit of what I have experience with. I only have one other suggestion for you then. Clear out the log folder within DB. Run DB a couple of time and make saves of the logs when DB acts up, then post those logs with an explanation of what is happening in the DB support section on the forums. It may be a profile code issue, it may not be, I just don't know enough to be able to tell you. However, the support section mods or people who frequent that section looking to help obviously will have a lot more information stored in their head than I do and can possibly help. Try and give them as much information as possible....the more the better as it will help them narrow things down a bit faster.

Good luck spitfire, wish I could help more.
 
Can someone give me a more detailed run down of the gear that is required to have my Barb-Bot be able to do this mp8+ Thanks!!
 
This profile is too unstable with simplefollow. Is there a way to make a profile that uses the same route as this but without quest tools?
 
I really like this profile, but for some reason I can't get it to remake another game. It runs 1 game and then it's done. Any idea on how to fix it?
 
My bots using simple follow keep crashing when the party leader is making a new game. Can u tell me why? The logs are too big i can't attach them.
 
===== Misc Statistics =====
Total tracking time: 10h 17m 2s
Total deaths: 25 [2.43 per hour]
Total games (approx): 84 [8.17 per hour]
Total XP gained: 0 million [0 million per hour]
Total Gold gained: 4997.81 Thousand [485.98 Thousand per hour]

===== Item DROP Statistics =====
Items:
Total items dropped: 10729 [1043.27 per hour]
Items dropped by ilvl:
- ilvl58: 597 [58.05 per hour] {5.56 %}
- ilvl59: 280 [27.23 per hour] {2.61 %}
- ilvl60: 1672 [162.58 per hour] {15.58 %}
- ilvl61: 3638 [353.75 per hour] {33.91 %}
- ilvl62: 2935 [285.39 per hour] {27.36 %}
- ilvl63: 1607 [156.26 per hour] {14.98 %}

Items dropped by quality:
- White: 3358 [326.53 per hour] {31.3 %}
--- ilvl 58 White: 149 [14.49 per hour] {1.39 %}
--- ilvl 59 White: 63 [6.13 per hour] {0.59 %}
--- ilvl 60 White: 389 [37.83 per hour] {3.63 %}
--- ilvl 61 White: 1155 [112.31 per hour] {10.77 %}
--- ilvl 62 White: 985 [95.78 per hour] {9.18 %}
--- ilvl 63 White: 617 [60 per hour] {5.75 %}
- Magic: 5912 [574.87 per hour] {55.1 %}
--- ilvl 58 Magic: 353 [34.33 per hour] {3.29 %}
--- ilvl 59 Magic: 176 [17.11 per hour] {1.64 %}
--- ilvl 60 Magic: 1024 [99.57 per hour] {9.54 %}
--- ilvl 61 Magic: 1993 [193.8 per hour] {18.58 %}
--- ilvl 62 Magic: 1587 [154.32 per hour] {14.79 %}
--- ilvl 63 Magic: 779 [75.75 per hour] {7.26 %}
- Rare: 1423 [138.37 per hour] {13.26 %}
--- ilvl 58 Rare: 95 [9.24 per hour] {0.89 %}
--- ilvl 59 Rare: 41 [3.99 per hour] {0.38 %}
--- ilvl 60 Rare: 256 [24.89 per hour] {2.39 %}
--- ilvl 61 Rare: 482 [46.87 per hour] {4.49 %}
--- ilvl 62 Rare: 352 [34.23 per hour] {3.28 %}
--- ilvl 63 Rare: 197 [19.16 per hour] {1.84 %}
- Legendary: 36 [3.5 per hour] {0.34 %}
--- ilvl 60 Legendary: 3 [0.29 per hour] {0.03 %}
--- ilvl 61 Legendary: 8 [0.78 per hour] {0.07 %}
--- ilvl 62 Legendary: 11 [1.07 per hour] {0.1 %}
--- ilvl 63 Legendary: 14 [1.36 per hour] {0.13 %}
 
problem with TownRun

Hi. I have a little problem when I am using this profile with my barb. when a inventory filled, my bot continues to kill all nearest mobs in a large area. it clear almost all wheeping hollow before it starts porting to city. I tried to reduce the radius of kills in bot config and trinity. it did not help. Anybody can tell me: in which modules of trinity I can change settings to bot started townrun a smaller area of mob location? sorry for my bad english) ty)
 
You must log in or register to reply here.
Back
Top