If you do add tower 2 please have different versions, one without tower 2 because i love it how it is, still running very smoothly mate great job. Started running it on my barb, over 3hrs, 29-40m exp/h usually sitting on 29-34,
[A3 Inferno] Alkaizer RUN Gnome Proof - Unstuckable
- Thread starter gnomegawd
- Start date
I'm pretty noobish at it, but what build does one use for this kind of run? (Barb)
What skills?
Also, will this Zip alongside with RadsAtom plugin is all I need? do I need item rules too? please be patient with the noob
What skills?
Also, will this Zip alongside with RadsAtom plugin is all I need? do I need item rules too? please be patient with the noob
Last edited:
gnomegawd
New Member
- Joined
- Sep 30, 2012
- Messages
- 820
- Reaction score
- 3
I have oppted to remove Crater for now until it can be stream lined. Reason I mention tower 2 is that it's a big circle, easy to navigate in. Crater is dropped till I can test an exit, been trying to get an exit working on keep level 2 that's what's taking so long. v3 is going to have some speed to it as there is further optimizations to make it even more classic run.
SOME HISTORY ABOUT THIS RUN:
Here is Alkaizer's Act 3 leveling run from his live stream.
Alkaizer was the first person to hit Paragon level 100 just 2 weeks after Patch 1.0.4 was released.
The Act 3 Run:
Resumes game right before Azmodan
Runs backwards through Core of Arreat, clear
WP to Tower of Damned Level 1, clear in a circle, WP out
WP to Arreat Crater Level 2, clear to Tower of Cursed Level 1 entrance, TP
Waypoint to Keep Depths Level 1, enter Keep Depths Level 2, clear
WP to Bridge of Korsikk
Clear Fields of Slaughter, then TP
Leave game, repeat.
Alkaizer's Description of his route:
My route changed a few times. At the start of paragon I was simply doing standard magic find runs, 5 stack siegebreaker to azmodan because I felt this would yield the best possible loot. Around level 40 is when I set it in stone that I was actually going to attempt to hit level 100 before anyone else. At this point I started at Azmodan's checkpoint and worked backwards trying to find good routes to maximize WOTB uptime and going through areas I felt were with it for potential item drops and exp.
It wasn't until around level 90 that my route became Core of Arreat(Azmodan Checkpoint) -> Tower of Damned Level 1 -> Arreat Crater Level 2 -> Keep Depths Level 2 -> Fields of Slaughter. I felt this would give me a good balance of drops and probably pretty close to the max possible experience for the time spent.
Build: The ww barb build Alkaizer used.
link to original document
Alkaizer was the first person to hit Paragon level 100 just 2 weeks after Patch 1.0.4 was released.
The Act 3 Run:
Resumes game right before Azmodan
Runs backwards through Core of Arreat, clear
WP to Tower of Damned Level 1, clear in a circle, WP out
WP to Arreat Crater Level 2, clear to Tower of Cursed Level 1 entrance, TP
Waypoint to Keep Depths Level 1, enter Keep Depths Level 2, clear
WP to Bridge of Korsikk
Clear Fields of Slaughter, then TP
Leave game, repeat.
Alkaizer's Description of his route:
My route changed a few times. At the start of paragon I was simply doing standard magic find runs, 5 stack siegebreaker to azmodan because I felt this would yield the best possible loot. Around level 40 is when I set it in stone that I was actually going to attempt to hit level 100 before anyone else. At this point I started at Azmodan's checkpoint and worked backwards trying to find good routes to maximize WOTB uptime and going through areas I felt were with it for potential item drops and exp.
It wasn't until around level 90 that my route became Core of Arreat(Azmodan Checkpoint) -> Tower of Damned Level 1 -> Arreat Crater Level 2 -> Keep Depths Level 2 -> Fields of Slaughter. I felt this would give me a good balance of drops and probably pretty close to the max possible experience for the time spent.
Build: The ww barb build Alkaizer used.
link to original document
I am at some point going to make a few different run version based on all Alkaizer info I find. back to the monday - friday profile thing
However; I will be probably following this posting as a guide line. One may notice that he does fields last instead of second last... 
gnomegawd
New Member
- Joined
- Sep 30, 2012
- Messages
- 820
- Reaction score
- 3
tested all night, have front 4 done, still have an incomplete on pure alkaizer, will explain what that means latter, nearly have dungeon lvl 2 solved.
not happy with release candidate yet, need a little more testing in the morning, sorry for this delay.
I what the heck I just seen 1 finish the dungeon and door complete, this is good news!
- 1. I am aware that it runs back and forth on AOC sometimes!
- 2. micro fixes everywhere
- 3. doesn't matter where you start now quest handles that
THIS IS ONLY A PRE-PREVIEW of a possible release candidate yes there is files in this profile that are not included in the loading, this is pure beta of my final before I write version 3.
Last edited:
Dirtbikr59
New Member
- Joined
- Nov 6, 2012
- Messages
- 3
- Reaction score
- 0
I recently tested "Alkaizer Pure 2d.zip" with Demon Buddy v1.0.1162.284 using the following plugins: RadsAtom, GilesTrinity, and YAR Comms. Trinity Simple Unstucker is enabled.
The script works wonderful prior to completing the Keep Depths Lvl 2. For instance, the bot backpedals towards the entrance upon revealing the exit location of Keep Depths Lvl 2 on the minimap. Shortly after, RadsAtom?s inactivity timer (1 min) will trigger the next profile, ?00_Gnome_START_HERE.? At this moment, the bot will use a town portal and hang out next to it in town indefinitely. I'm going to give "04_KeepLevel2b - exit" a try.
Is it possible to route the outer perimeter only in the Fields Of Slaughter? The middle section doesn't seem to have much reward due to a smaller mob density per additional time.
I also believe ?00_Gnome_START_HERE.xml? needs something like this in it:
Thank you Gnomegawd for your thoroughness and hard work. I look forward to Version 3.
The script works wonderful prior to completing the Keep Depths Lvl 2. For instance, the bot backpedals towards the entrance upon revealing the exit location of Keep Depths Lvl 2 on the minimap. Shortly after, RadsAtom?s inactivity timer (1 min) will trigger the next profile, ?00_Gnome_START_HERE.? At this moment, the bot will use a town portal and hang out next to it in town indefinitely. I'm going to give "04_KeepLevel2b - exit" a try.
Is it possible to route the outer perimeter only in the Fields Of Slaughter? The middle section doesn't seem to have much reward due to a smaller mob density per additional time.
I also believe ?00_Gnome_START_HERE.xml? needs something like this in it:
Code:
<If condition="(not Me.IsInTown)"><UseTownPortal questId="1"/></If>Thank you Gnomegawd for your thoroughness and hard work. I look forward to Version 3.
Last edited:
"Failed to load profile: Element Continue is not supported. Please check your XML and try again. (<Continue profile="02_Tower1.xml" />) Line 30"
why it happen?
I was running that around 3h and the message spawned and cant start again this profile
why it happen?
I was running that around 3h and the message spawned and cant start again this profile
Hello guys..Nice profile..its fast and no problems..but is too short damn..and i tryed to combine it with another profile..with (noForwardUnderbridge)...So i opened the .xml and changed the continue path to (03_ArreatCraterLevel1) from there i change it to open (05_KeepLevel2) and from keep to continue the normal way...But when he reach keeps he stuck alot in there..I noticed got problems and in Stonefort..he skipped and Azmodan etc..Why soo many problems when i only changed the order of loading the xml files? When i run those profiles only whitout to combine then..its fine.Can any 1 help me?I want bigger act 3 run..I dont like others becouse got problems in barracks and underbridge etc..When he see elite across the wall he stuck...Thats why using (noForwardUnderbridge) and no more stucks..But really if some 1 can add keeplvl 2 and arretcrater1 into this profile whitout stucks will be great..Thank you.
gnomegawd
New Member
- Joined
- Sep 30, 2012
- Messages
- 820
- Reaction score
- 3
That is what is great about Alkaizer run it's huge known in the population of players, and it is SHORT! This factor will not work against you.
gnomegawd
New Member
- Joined
- Sep 30, 2012
- Messages
- 820
- Reaction score
- 3
Ty and TYVM! I am resuming testing, all that 04 Keeplevel2b - exit is a tester file, it should now find the door to dungeon 3 and use it... then town portal and exit game restart. That is what I have intended. I am going to test vigorously today and see if I can't get a bug free release out.
I still draw back to a simplified run I do have, pre beta, but it worked 9 hours + no stops. I do intend to release it as well however I probably wont support further versions of that pre beta because it's moved into v2 and v3.
And yes I was going to optimize fields to do a more zig zag and only 1 time around it pattern.
gnomegawd
New Member
- Joined
- Sep 30, 2012
- Messages
- 820
- Reaction score
- 3
the profile dont work for me
i try it allrun to checkpoint without checkpoint
i start the 00_Gnome_START_HERE file and im in town every time
I have noticed that DB can act funny at times, to reduce bug, try delete the profile folder of this profile, extract from zip file, rename profile folder to my al run or something. RESTART DB!!!! then load then attempt a start again.
gnomegawd
New Member
- Joined
- Sep 30, 2012
- Messages
- 820
- Reaction score
- 3
Wow just noticed 2d loops over and over if it doesn't find the door to 3. Still can't understand why it leaves the door alone when it finds it, however; if you manually move it near the door to dungeon 3 it uses it. Like wth, I know it's cause 2 different world maps, just have to code it in... yuk.
Going to release quick fix with ultimate stop in Dungeon 2, and repair the core loop that makes it run back and forth on it 2 times instead of the single run, already done the stop fix for dungeon 2.
Going to release quick fix with ultimate stop in Dungeon 2, and repair the core loop that makes it run back and forth on it 2 times instead of the single run, already done the stop fix for dungeon 2.
Last edited:
gnomegawd
New Member
- Joined
- Sep 30, 2012
- Messages
- 820
- Reaction score
- 3
i try it allok try and try and try and try
wich is the best at moment ?
b : c : d ?
version 1.0 ....
i need to put up a SVN
So no 1 cant help me to integrate them both in 1 working profile?And no 1 cant tell me why is that happening when i'm changing only wich file to load next?Why that is messing stonefort and etc..when i didnt touch stonefort file at all.Thank you
gnomegawd
New Member
- Joined
- Sep 30, 2012
- Messages
- 820
- Reaction score
- 3
thats the cool thing about db, it can be unpredictable. You can post your topic, as I wish or I hope for you to add this into this run "****" and I will add it or do a version towards your needs. I sort of know the answer to your question but until I see the entire profile and files, I can't really tell.
HOWEVER:
LOOK HERE!!! WOOOT, this is early again, COA doesn't exactly run 100% way I want but will very soon as I am back coding to fix this, however; in the mean time, this should be an non loop non stuck as I have had it running for about 2 hours now, and have addressed a lot of little problems. PLEASE BE AWARE: there is extra files in this release that have zero to no relevant use in the profile. Do not add or use them in anyways. It's intended to run from the START here script and to not stop.
There is still some bugs, had to fix a loop if actually finishes the run and enters dungeon 3 that it would loop back to 2 and not load correct profile.
Please be patient as I will be releasing a lot of different builds until I am happy, some builds will cease to exist after v3 comes out. Check Back Often!
Last edited: