[A1 - Inferno] Champion-Hunting

Arm · Sep 1, 2012

ofc i ve got RadsProfileManager but I also have Profile Restarter. could it be the cause of this?

i have same issue in a3 profile

xerus · Sep 1, 2012

nvm. Great routine!

devious21 · Sep 1, 2012

Arm said:
ofc i ve got RadsProfileManager but I also have Profile Restarter. could it be the cause of this?

i have same issue in a3 profile

Yes. don't use two profile managers at the same time, get rid of profile restarter!

Arm · Sep 2, 2012

Thx, Profile Restarter was the problem. Btw any chance te repair weeping hollow stuck place?

jrl5k · Sep 2, 2012

kudos! this is amazing thank you for all of your hard work

fragmam · Sep 2, 2012

which place has more champion?

dookiepie · Sep 3, 2012

Popaul87 said:
Sorry. I'm pretty sure we aren't laughing at you. Just the circumstances... Why would you bot hardcore to begin with. Any bot can have "glitches".
Maybe it got stuck and while trying to unstuck it was being attacked.. I'm new here also, but I've red somewhere that you should have atleast 1600 LOH and 1200 RA , I forget how much life.
I personnaly would never use this on HC. No point since no RMAH, & I'm sure most of us use it to farm items for the RMAH.
That's just my thought thou.

Sucks that your guy died..

I'm laughing at him. Hey durnhal, you're a f***ing idiot. LOL

As for "giving useful help," maybe try not botting on hardcore. Beyond that, what do you want us to do? Resurrect your character?

Arm · Sep 3, 2012

Am I the only one who has problem with stucking in The Weeping Hollow?

stupidboy · Sep 3, 2012

I need advice on your rad profile manager.

I am running 2.2.1 antidote, when it finishes all the profiles it doesnt leave game n restart, but instead it run the starting profile and running again on the cleared maps. basically it is not killing any mobs, because everything is cleared.

I am using
Antiidle v1.3.4 (previous profile and plugin state is unticked)
GilesCombatReplacer 0.5.3.2
GilesStashreplacer 1.9.9.1
Gilesworldobjecthandler 1.7
RadsProfileManager Beta (Updated version: 28-8-12)

Thank you.

Takashino · Sep 3, 2012

Hey Radonic, Im testing your profile right now and Im using all Plugins. but the profile doesnt repeat when it finish all areas. it just stay in town and bot just stop. how do I fix that ?
thanks

devious21 · Sep 3, 2012

stupidboy said:
I need advice on your rad profile manager.

I am running 2.2.1 antidote, when it finishes all the profiles it doesnt leave game n restart, but instead it run the starting profile and running again on the cleared maps. basically it is not killing any mobs, because everything is cleared.

I am using
Antiidle v1.3.4 (previous profile and plugin state is unticked)
GilesCombatReplacer 0.5.3.2
GilesStashreplacer 1.9.9.1
Gilesworldobjecthandler 1.7
RadsProfileManager Beta (Updated version: 28-8-12)

Thank you.

Anti-idle is 100% incompatible with RadsProfileManager.
Get rid of it and try again!

devious21 · Sep 3, 2012

devious21 said:
Anti-idle is 100% incompatible with RadsProfileManager.
Get rid of it and try again!

Takashino said:
Hey Radonic, Im testing your profile right now and Im using all Plugins. but the profile doesnt repeat when it finish all areas. it just stay in town and bot just stop. how do I fix that ?
thanks

Can you be more specific? Does it finish the run and then immediately leave the game? Or is the inactivity timer being tripped

solitudethedude · Sep 4, 2012

Does anyone else have the gear to use the act2 profile but instead uses this one because it seems to be more efficient with less stucks etc?

Takashino · Sep 4, 2012

devious21 said:
Can you be more specific? Does it finish the run and then immediately leave the game? Or is the inactivity timer being tripped

My barb was stuck in town, and then he just keep reset the game by unstuck because he isnt doing anything. so I deleted the profile and Plugins and redownload everything. and now it just do ONE set of every area then the bot just stop. do I need anything plugins to keep the profile restart or something?

Newest version of DB
Acronic-Plugin-7512579
GilesMonsterPriorityChanger
GilesStashReplacer
GilesWorldObjectHandler
NotificationOKClick - Auto Click Notification OK button
UnstuckMe

Thank you very much

GodsDisciple · Sep 4, 2012

hello Radonic,
First of all i must thank you for this awsome profiles and all the efford you have put into it.
My bot works fine, except that doesn't seem to randomize at all the profiles as intended. Yes the check box is checked on the recomended plugin.
he always start on leoric and goes from there but always following the same profiles

he finishes the cycle and start over.
Any sugestion on what it can be?

Im using RadsProfileManager, Giles Combat replacer, GilesStashReplacer and UnstuckMe

Thanks in advanced

devious21 · Sep 4, 2012

Acronic-Plugin-7512579 should contain RadsProfileManager -> But it shouldn't be two folders deep.
It should be Demonbuddy\Plugins\RadsProfileManager. If you have that enabled it should have no problems restarting the profile/
However, some people have reported problem when using unstuckme in combation with these profiles, try disabling that if it doesn't work.

GodsDisciple said:
hello Radonic,
First of all i must thank you for this awsome profiles and all the efford you have put into it.
My bot works fine, except that doesn't seem to randomize at all the profiles as intended. Yes the check box is checked on the recomended plugin.
he always start on leoric and goes from there but always following the same profiles he finishes the cycle and start over.
Any sugestion on what it can be?

Im using RadsProfileManager, Giles Combat replacer, GilesStashReplacer and UnstuckMe

Thanks in advanced

Security Randomization does not randomize the order of the profiles, and currently there are no plans to make it do this.
What it does is randomly pick between version A and version B of each profile segment. ex: You'll see Antidote_FesteringWoodsA and Antidote_FesteringWoodsB If you look.
Randomizing the order of the profiles isn't important since most players typically farm in the same order anyway. In addition, if they were checking player paths, they'd probably do it by zone anyway so randomizing the segments would not help!

Thanks for the input though!

Nevrod · Sep 4, 2012

I am new to this profile so forgive me if what I am asking is stupid or not allowed :O, but I was wondering, is this profile supposed to run the entire Act 1? or just a few parts. I was watching the bot work for a while and I noticed it clears only a few areas, getting 5 stacks of NV and killing a few elite packs and restarting all over again.

devious21 · Sep 4, 2012

Nevrod said:
I am new to this profile so forgive me if what I am asking is stupid or not allowed :O, but I was wondering, is this profile supposed to run the entire Act 1? or just a few parts. I was watching the bot work for a while and I noticed it clears only a few areas, getting 5 stacks of NV and killing a few elite packs and restarting all over again.

It pretty much clears all static areas in Act 1. If you look at the profile segments, you'll see that this profile contains:

Code:

Antidote_FesteringWoodsA.xml 	
Antidote_FesteringWoodsB.xml 	
Antidote_FieldsofMiseryA.xml 	
Antidote_FieldsofMiseryB.xml 	
Antidote_LeoricsHuntingManorA.xml 	
Antidote_LeoricsHuntingManorB.xml 	
Antidote_OldTristram.xml 	
Antidote_START_HERE.xml 	
Antidote_SouthNorthHighlandsA.xml 	
Antidote_WeepingHollowA.xml 	
Antidote_WeepingHollowB.xml

tech242 · Sep 4, 2012

First of all, thanks for all the great work on this!

I'm experiencing some problems though. When first started (with the *START_HERE* profile) bot runs through complete list, but once the first run finishes it leaves game and then starts a new game with the last used profile (*OldTristram*) which it finishes fairly quickly and then leaves game again. So I end up with the bot using just the one profile over and over again. Any idea how to make bot restart with the first profile whenever a new game is created?

Using the following plugins: BuddyStats, GilesMonsterPriorityChanger, GilesStashReplacer, GilesWorldObjectHandler and RadsProfileManager.

devious21 · Sep 4, 2012

tech242 said:
First of all, thanks for all the great work on this!

I'm experiencing some problems though. When first started (with the *START_HERE* profile) bot runs through complete list, but once the first run finishes it leaves game and then starts a new game with the last used profile (*OldTristram*) which it finishes fairly quickly and then leaves game again. So I end up with the bot using just the one profile over and over again. Any idea how to make bot restart with the first profile whenever a new game is created?

Using the following plugins: BuddyStats, GilesMonsterPriorityChanger, GilesStashReplacer, GilesWorldObjectHandler and RadsProfileManager.

Is your RadsProfileManager 0.9.0?
Additionally, did you hit the STOP button and then START at any point? It reloads the profile you "started" the bot on.
So if you hit START on the Start_Here one, it should be remaking with that.

If those suggestions dont apply, your best bet is a fresh DB/plugin install.

[A1 - Inferno] Champion-Hunting

New Member

New Member

New Member

New Member

New Member

New Member

New Member

New Member

Member

New Member

New Member

New Member

New Member

New Member

Member

New Member

New Member

New Member

New Member

New Member